Precision Power PH.10 Manuel utilisateur
2012 PHANTOM
SUBWOOFERS
PH.10 PH.12 PH.15
Thank you for choosing PrecisionPower woofers. Designed and engi-
neered in the USA, this product combines innovative technology with
the finest materials to consistently deliver Absolutely State of the Art
performance, sound quality, reliability, and value. This PrecisionPower
product reflects our commitment to offer you unparalleled perfor-
mance and quality for years of dependable service and listening en-
joyment.
Non Pressed Paper Pulp Cone
High Roll Foam Surround
2.0” 4-layer VC on Aluminum Former
Nickel Plated 8ga. Compression Terminals
Poly-Cotton Suspension Spiders
Stamped Steal Frame
Vented T-Yoke Back-plate
Woven Fiber dust cap
Features, Parameters, & Dimensions
Impedance dual 2ohm dual 2ohm dual 2ohm
Re2.2009 2.2655 2.2110
Fs(hz) 39.12 33.17 25.17
Qes 1.3808 1.5087 1.2924
Qms 6.7067 7.0376 3.7318
Qts 1.1451 1.2424 0.9559
le(mh) 0.9689 0.9656 1.0144
dIameteR 10Inch 12Inch 12Inch
sd78.5398 In^2 113.0973 In^2 176.7146 In^2
Vas (l) 30.4636 64.8921 163.3262
Bl8.8105 9.1637 11.0581
sen 82.9 83.7 84.7
Rms/max 720/1800 850/2000 1000/2200
cutout dIam 9.6Inch 11.6Inch 14.5Inch
mountIng depth 5 5/8 Inch 6 Inch 6 7/8 Inch
ph.10 ph.12 ph.15
Enclosure Construction
Enclosure Dimensions
Enclosure Recommendations
Included in this manual are a number of different enclosure sugges-
tions. These are by no means the only enclosures to use, but they
provide a starting point to determine the correct enclosure for your
needs many factors must be addressed (amount of power, vehicle,
placement, crossovers, etc) Therefore, as always, PrecisionPower
recommends that your subwoofer be installed by an authorized Pre-
cisionPower dealer.
All enclosures should be made of .75” (3/4”) material only. When pos-
sible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the depth
of the enclosure to compensate. All volumes INCLUDE vent/port and
subwoofer displacements. DO NOT change the volume unless you
plan on adding a substantial amount of bracing. For added per-
formance, applying a coat of fiberglass resin to the interior walls will
greatly improve sealing the enclosure. Adding a thin layer of poly-fill
will improve response by smoothing out reflections within the enclo-
sure.
sealed ph.10 ph.12 ph.15
mIn .75cu Ft. 1.0cu Ft. 1.5cu Ft.
optImum 1.0cu Ft. 1.5cu Ft. 2.5cu Ft.
poRted
mIn 1.0cu Ft. 1.5cu Ft. 2.5cu Ft.
poRt Wxl 3Inch x5.5Inch 4Inch x5Inch 5Inch x7.8Inch
F3 (hz) 34 38 30
optImum 1.5cu Ft. 2.25cu Ft. 2.75cu Ft.
poRt Wxl 4Inch x6Inch 6Inch x7Inch 6Inch x7Inch
F3 (hz) 32 34 28
PRECISION POWER AUDIO SUBWOOFERS CAR AUDIO SUBWOOFERS
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Precision Power Subwoofer
Precision Power
Precision Power PowerClass PRO15 Manuel utilisateur
Precision Power
Precision Power PC8C2 Manuel utilisateur
Precision Power
Precision Power SEDONA SN.10 Manuel utilisateur
Precision Power
Precision Power POWERCLASS PC10 Manuel utilisateur
Precision Power
Precision Power PC.15DS Manuel utilisateur
Precision Power
Precision Power PowerClass PRO15 Manuel utilisateur
Precision Power
Precision Power A.12SQ Manuel utilisateur
Precision Power
Precision Power PrecisionPower PC102 Manuel utilisateur
Precision Power
Precision Power PCX 102 Manuel utilisateur
Precision Power
Precision Power SEDONA S.12 Manuel utilisateur
