PowerWatch 2 Series Manuel utilisateur
USER
MANUAL
1
TABLE OF CONTENTS
Keys 2
Initial Setup 4
Power off and Factory Reset 6
Navigating from the Home Screen 8
Read Notications 9
Status Widgets 10
Start an Activity 12
Thermoelectric Power 15
Charging the Battery 16
Regulatory Statements 18
E-Label 21
User Manual Series 2
User Manual Series 2
BACK
Go back to the
previous screen.
SELECT
Select options.
2
KEYS
Key Functions
UP
Scroll up through the
widgets, data screens,
options, and settings.
DOWN
Scroll down through
the widgets, data
screens, options, and
settings.
3
Alternate Key Functions
Enter Widgets Mode from the home screen.
Turn the watch on and off from the menu.
Enter Activity Mode from the home screen.
Hold for 3 seconds to turn the backlight on and off.
Hold both buttons for 7 seconds to turn on the
watch for the first time.
Enter Notification Mode from the home screen.
Notification
Airplane Mode On /
Bluetooth Mode Off
Do Not Disturb Mode
GPS Signal Strength
Status Icons
4User Manual Series 2
Turn on the Watch
INITIAL SETUP
Press and hold DOWN and BACK for 7 seconds to turn the watch on. This
only applies to turning on the watch for the first time.
When the watch is powered on, it will display the logo splash screen.
Release the buttons when the splash screen appears.
N
25
75
50
5
Pair with Smartphone
Only applicable for initial set up. If the watch has been previously paired,
this step will be automatically skipped.
N
25
75
50
N
25
75
50
After the watch is powered on, a screen with a QR code will be displayed.
Scan the QR code using a smartphone and the pairing screen will appear.
4595
6User Manual Series 2
N
25
75
50
N
25
75
50
Power off
The watch can be powered off in
two ways:
Soft Power-off
1. Use UP and DOWN to scroll
through the widgets to the
settings menu.
2. Press SELECT to enter the
settings menu.
3. Use DOWN to scroll through
to the “Power Off” option.
4. Press SELECT to power off.
Hard (Forced) Power-off
The watch can be powered off in
any state by pressing and holding
buttons DOWN and BACK for 7
seconds.
POWER OFF AND FACTORY RESET
7
N
25
75
50
N
25
75
50
Factory Reset
A factory reset removes all installed
apps, clears custom settings,
and restores the watch to its
factory default settings.
1. Press DOWN to scroll through the
widgets to the settings menu.
2. Press SELECT to enter the
settings menu.
3. Press DOWN to scroll through to
the “Reset” option.
4. Press SELECT to reset.
8User Manual Series 2
NAVIGATING FROM THE HOME SCREEN
BACK
Go back to the
previous screen.
SELECT
Start an Activity
Walk, run, cycle, etc.
UP
Read Notications
e.g. Reply to messages
or reminders.
DOWN
Status Widgets
e.g. Steps, heart rate,
sleep, calories, and
settings.
9
N
25
75
50
N
25
75
50
READ NOTIFICATIONS
Enter Notication Mode
Push UP to enter the Notification
Mode.
Push UP or DOWN to scroll through
notifications.
Push SELECT to take actions for
each notification.
Autres manuels pour 2 Series
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels PowerWatch Montre
