powersoft WM Touch Manuel utilisateur
Keep this manual
for future reference
©2021 Powerso
USER GUIDE
WM Touch
DO000XXX R0
2 | WM Touch
Overview
The WM Touch is a PoE fed wall-mounted touch screen soluon aimed at remotely controlling audio system func-
onalies, such as zone level and source selecon, system scenes recall, and system on/o.
The WM Touch can be used for two purposes:
•Mainly, as a dedicated wall-mounted touch screen for system control, including that of zones and sources.
Controls are shared over the network via ethernet cable, and mulple touch screens can be used in the same
system.
•As a host for oponal system control user interfaces (Views) that can be accessed from Powerso’s SYS Control
mobile app, or from a tablet or PC web browser (Web Views). In other words, with the appropriate congura-
on, whenever a WM Touch is present in the network, users are also able to control the system via the app or
web browsers.1
1 When using mobile phones and tablets, a router will be necessary to connect these devices to the system control network.
One WM Touch alone can handle the controls of an enre system of Powerso ampliers. It is not necessary to
keep ArmoníaPlus or a dedicated PC running to access these system controls.
WM Touch | 3
A PoE injector or PoE switch is necessary for powering the WM Touch and a regular Cat5 cable (or above) can be
used for connecon. The WM Touch must always be in the same network that is connected to the control ether-
net ports of the ampliers, as indicated below.
Compability
The WM Touch is a perfect match for controlling the Mezzo A and AD Series amplier plaorms, and it is also com-
pable with the Duecanali DSP+D, Quarocanali DSP+D, Oocanali DSP+D, X Series, and T Series ampliers.
Duecanali
Quarocanali
Mezzo
Oocanali
STATUS
NETWORK
SIGNAL
70V
100V
25V
CAL
6s
3s
I4 I3 I2 I1 5V
-10 dBV
4 IN 3
MAINS
2 1
2 IN 1 OUT4 3
MEZZO 322 AD
SWITCHED
CTRL +CTRL +
CTRL
STATUS
NETWORK
SIGNAL
SWITCHED
70V
100V
25V
CAL
6s
3s
CTRL +CTRL +
CTRL
I4 I3 I2 I1 5V
-10 dBV
4 IN 3
MAINS
2 1
2 IN 1 OUT4 3
MEZZO 602 AD
SWITCHED
CTRL +CTRL +
CTRL
STATUS
NETWORK
SIGNAL
70V
100V
25V
CAL
6s
3s
I4 I3 I2 I1 5V
IN2 1
-10 dBV
4 IN 3
MAINS
4 3 2 1
2 IN 1
MEZZO 324 AD
STATUS
NETWORK
SIGNAL
SWITCHED
70V
100V
25V
CAL
6s
3s
CTRL +CTRL +
CTRL
I4 I3 I2 I1 5V
IN2 1
-10 dBV
4 IN 3
MAINS
4 3 2 1
2 IN 1
MEZZO 604 AD
PoE
Injector*
PoE
Injector*
PoE
Injector*
4 | WM Touch
Conguraon
The WM Touch control interface layout is pre-dened and will automacally adapt to the dierent user congura-
ons, including screen orientaon. Some basic set-up can be performed directly on the WM Touch, whilst more
advanced conguraons will require the soware ArmoníaPlus (version 2.1 or later).
Soware Conguraon
In ArmoníaPlus, a new virtual WM Touch can be added to the Workspace from Design > Controls and by clicking
the WM Touch icon in the top bar.
Alternavely, online panels already connected and available in the network can be dragged and dropped to the
Workspace from the Discovery bar (Design > Match).
Once a WM Touch is in the Workspace, under the Design > Control, select one or more panels and proceed with
the conguraon from the ribbon menu.
From the ribbon menu, it will be possible to:
1. Edit the WM Touch name. This will be the name displayed on the device itself.
2. Select the control funcons to be displayed on the WM Touch.
• Zone Level – displays level and mute controls for the zone(s) selected.
• Source Selecon – enable users to choose from the dierent sources available for the zone(s) selected.
• Scenes Recall – enable users to choose from the dierent scenes (system conguraons) created for the
system.
• System On/O – displays an on/o buon.
3. Select the zones to be controlled by the panel. This opon will only be available if either ‘Zone Level’ or ‘Source
Selecon’ boxes are cked.
4. Perform addional conguraons, such as:
• Selecng the me for the screen lock acvaon (only available for online devices). The mer can also be
congured locally on the WM Touch itself.
• Enabling and seng a 4-digit passcode for exing the screen lock.
• Loading a custom logo to be displayed in the screen lock window.
Just like with Powerso ampliers, the IP address of the WM Touch can be congured under Cong > IP. This op-
on is only available for online devices.
42 31
WM Touch | 5
Local Conguraon
Language and Screen Orientaon
The start-up screen of the WM Touch allows the
conguraon of the screen orientaon mode and the
interface language.
Idenfy
The start-up screen also displays an ‘Idenfy’ buon.
When pressing this buon, the matching device will be
highlighted in ArmoníaPlus, under the Discovery bar
(Design > Match). The ‘Idenfy’ buon is also available
in the ‘Hidden Sengs’ menu.
Hidden Sengs Menu
Aer the WM Touch has been congured with Ar-
moníaPlus, and the system is already running, it is sll
possible to change the Language and Screen orienta-
on from the ‘Hidden Sengs’ menu. To access the
menu, select ‘More’ from the main ribbon menu (only
visible when the system is running). Press and hold the
‘Project Info’ icon for 2 seconds and release.
Screen Lock & Timer
The touch screen can be manually locked by pressing
More > Lock Screen. By default, the screen will auto-
macally be locked aer 30 seconds of inacvity and
the display brightness will be reduced. This mer can
be changed to a set of predened values from the ‘Hid-
den Sengs’ menu.
6 | WM Touch
Operaon
The WM Touch will automacally adapt to the dierent user conguraons selected, including dierent screen
orientaon modes. Addionally, the layout will change depending on how many zones the screen has been cong-
ured to control.
Single Zone Operaon
When the WM Touch has been congured to control
one single zone, the acve source playing in that zone
can be selected from the dropdown menu on the top of
the screen (A). The volume can be controlled using the
circular slider and pressing the speaker icon will mute/
unmute the zone (B).
Scenes Selecon
Scenes can be accessed from the ribbon menu (A).
Once inside the Scenes window, load a dierent system
conguraon by pressing the selected scene on the
screen, holding unl loading is full (B), and releasing.
Mul-Zone Operaon
In a mul-zone conguraon, it is possible to control
mulple zones simultaneously, either by manually se-
lecng each zone or by using the ‘Select All’ buon (A).
Once one or more zones have been selected, it will be
possible to select the source playing in those zones
(B), mute/unmute them (C), and adjust their level (D).
When mulple zones are selected, the level changes
applied will maintain the relave level dierences be-
tween them.
A
B
D
A B C
A
B
WM Touch | 7
System ON/OFF
The system on/o control can be accessed via the
‘More’ icon in the ribbon menu (A). A new window will
be opened from where the system can be turned on/
o by pressing the dedicated buon (B), holding it unl
loading is full, and releasing.
B
A
8 | WM Touch
Troubleshoong
In some rare cases, the WM Touch may display the message “Update Failed” following a reboot or rmware
update. This means that the device rmware needs to be updated and the conguraons re-loaded to the WM
Touch. Follow the procedure below to recover the device.
1. From a computer connected to the same network of the WM Touch, type in the IP address of the device in any
web browser, followed by /recovery. This will open the WM Touch Recovery page from where the rmware can
be updated (see below).
If you have a mobile phone connected to the same network of the WM Touch, you can use the QR code pro-
vided on the screen to access the recovery page.
Please note that while connected to the recovery page, the device will not show up in the ‘Discovery’ tab in
ArmoníaPlus.
2. If the computer is connected to the internet, it will be possible to download the latest rmware version (Step 1).
Alternavely, you can manually upload a le containing the rmware update (Step 2).
3. Click on ‘Update’ to start the updang process. This may take a few minutes.
4. Once the update is nished, close the WM Touch Recovery page.
5. In ArmoníaPlus, go to the ‘Controls & Views’ opons on the top right corner of the screen and stop the system
currently running.
6. Reload the conguraons to your WM Touch from the Discovery bar (Design > Match).
7. Run your system again.
WM Touch | 9
DRIVING HUMAN AUDIO EXPERIENCE
POWERSOFT S.P.A.
Via E. Con, 5 - Scandicci (FI) 50018 - Italy
support@powerso.com
+39 055 73 50 230
+39 055 73 56 235
POWERSOFT.COM
Autres manuels pour WM Touch
1
Table des matières
Autres manuels powersoft Écran tactile
Manuels Écran tactile populaires d'autres marques
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manuel utilisateur
YASKAWA
YASKAWA TP 610C Manuel utilisateur
B&R
B&R Power Panel C Series Manuel utilisateur
Beijer Electronics
Beijer Electronics X2 control Manuel utilisateur
AXIOMTEK
AXIOMTEK GOT321W-521 Manuel utilisateur
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manuel utilisateur
