d) Remove any adjustment wrenches from the tool before turning it on. A tool or wrench left in a rotating part of the
tool may cause injury.
e) Stay low. Maintain proper posture and balance at all times. This enables better control of the tool in unexpected
situations.
f) Wear appropriate clothing. Do not wear loose clothing or jewelry when working with this tool. Keep your hair,
clothing, and gloves away from moving parts. Loose clothes, jewelery or long hair can be caught in moving parts.
g) If the devices for connecting the dust extraction and collection mechanisms are included, check that they are
connected and correctly fitted. Using a dust extraction device can reduce the risk of dusts.
h) Do not allow knowledge of the machine to ignore safety precautions. Careless action can lead to serious injury
within seconds.
4) The use and care of tools.
a) Do not overload the device. Use tools appropriate to the application. The correct tool will do the job better and
safer within the specified performance range.
b) Do not use the appliance if it cannot be turned on or off with the relevant switch. Devices that cannot be controlled
with the switch are dangerous and must be serviced.
d) Store idle tools out of the reach of children and keep them away from persons unfamiliar with the tools or their
operating instructions. Tools represent a danger in the hands of inexperienced users.
e) Maintain tools. Check the device for improper alignment or blockage of moving parts, broken parts or other defects
that may have a negative effect on the operation of the device. In the event of a fault, repair the device before
reusing it. Many accidents are caused by poorly maintained tools.
g) Use tools, accessories, bits etc. in accordance with these instructions, taking into account the working conditions and
the tasks to be performed. Using the tools for work other than those for which they are intended may result in a
hazardous situation.
h) Keep the handles and the surface of the handles dry, clean and free of oil and grease. Slippery handles do not ensure safe
operation and control of the tool in unexpected situations.
B SAFETY RELATED TO USE AND MAINTENANCE
1. Do not overload the tool. The device will work better and safer under the loads for which it has been adapted.
Do not try to use incompatible accessories to increase the performance of the tool.
Do not use a tool with a damaged switch. Any tool that cannot be controlled with the switch is dangerous and
should be repaired. The tool should be stored disconnected from the power source, out of the reach of children
and unauthorized persons.
Maintain the tool regularly. Check for play and failures of moving parts, for damaged parts of the tool, or for
other defects that may interfere with the correct operation of the device. In the event of any irregularities, the
tool should be repaired immediately. Many faults arise from poor maintenance.
Use the tool and related accessories in accordance with this manual and in a proper manner. The conditions
and type of work to be performed should be taken into account. Serious accidents may occur if the tool is
misused.
2.
3.
4.
5.
5
