PowerAcoustik PADVD-360 Manuel utilisateur
OWNER’S MANUAL
Mobile Video System
- 1 -
SAFETY INFORMATION
Please read the manual carefully before operating this unit and keep it for
future reference.
CAUTION: This unit is a class 1 laser product. To prevent direct exposure to the
laser system, do not open the unit. The laser beam may hurt your eyes.
If the unit requires adjustments, contact an authorized service centre.
USE THIS PRODUCT SAFELY
Be sure you fully understand the following safety information:
When driving
Keep the unit at an appropriate sound level. Driving with the sound at a level
preventing you from hearing sounds outside and around the car may cause an
accident.
When cleaning
Do not expose the product to water or excessive moisture. This could cause short
circuit, fire or other severe damage.
When parked
Parking in direct sunlight can result in very high temperature levels inside your car.
Let the interior and unit cool down before switching the unit on.
NOTE:
Do not use and store the player in dusty, hot or humid environment.
FUSE REPLACEMENT – WARNING!
Never replace any fuse with one of a higher value than the fuse supplied
with your unit. Using a higher current rated fuse may cause damage to
your unit and/or electrical wiring.
- 2 -
FEATURES
True DIN Size DVD Player
DVD/VCD/CD/CD-R/CD-RW/MP3 Compatible
Full Function Remote Control
Extra Remote Eye
Last Position Memory
On Screen Display
Built-in Dolby Digital Decoder
Digital Anti-Shock
NTSC/PAL Switchable
FrontAudio, Video Input
Audio, Video Output
Coaxial Output
NOTE:
This user's manual is only for reference.
Modifying rights are reserved.
Specifications are subject to change without notice.
- 3 -
ACCESSORIES
- 4 -
TABLE OF CONTENTS
Safety information ............................................................………………..1
Features ...........................................................................………………..2
Accessories ......................................................................………………..3
Table of Contents..............................................................………………..4
Front Panel Description ...................................................………………..5
Rear panel Description ..................................................………………..5
Remote Control Description ...........................................………………..6
Installation and Removal ..................................................………………..8
Wire Connection .......................................................... …………………11
Disc Notes ......................................................................…………………12
Disc Operation................................................................…………………13
Basic Playback Operations ............................................…………………14
DVD Setup Menu .............................................................…………………17
Specifications..................................................................…………………22
Requirements .................................................................…………………23
Trouble Shooting.............................................................…………………24
- 5 -
FRONT PANEL
1. POWER / PAUSE 7. AV LED
2. PREVIOUS 8. EJECT
3. NEXT 9. POWER
4. STOP 10. RESET
5. DVD LED 11. A/V INPUTE
6. REMOTE
REAR PANEL
12. DC 12V IN 1 15. AUDEO OUTPUT
13. DC 12V IN2 16. REMOTE SOCKET
14. VIDOU OUTPUT 17. COAXIAL
- 6 -
REMOTE CONTROL
1. POWER 13. TITLE 25. VOLUME-
2. SOURCE 14. ZOOM 26. DOWN
3. MUTE 15. SUBTITLE 27. STOP
4. GOTO 16. AUDIO 28. PLAY/PAUSE
5. MENU 17. EJECT 29. A - B
6. UP 18. NUMBER BUTTONS 30.ANGLE
7. LEFT 19. PROG 31. PAL/NTSC
8. PREVIOUS 20. SLOW 32. REPEAT
9. NEXT 21. SETUP 33. PBC
10. FF 22. ENTER
11. FR 23. RIGHT
12. VOLUME+
- 7 -
Replacing the Batteries
If the remote control has no function or if the operating range is reduced, replace the
old battery with new one.
1. Remove the battery cover. Follow the arrow (1) slide the tab to the right
while pulling the cover away at the same time.
2. Place the new battery in the tray and slide the cover back into place.
3. Make sure the cover is locked into place.
- 8 -
UNIT INSTALLATION
Installation Method 1:
1. Tighten mounting bracket 2(accessory 11) to the side of the unit:
2. Mount the frame (accessory 12)and check that it is hooked to the unit.
3. Hitch the mounting box(accessory 1) to the unit from rear to front.
- 9 -
Installation Method 2:
1. Select a position where the screw holes of the main unit become aligned with the
mounting bracket 1 's (accessory 3) tighten the screws on each side.
Removal Method 1:
1. Insert the keys(accessory 7) into the holes at both sides of the unit until the
mounting box can be removed.
2. Remove the frame with the keys
Table des matières
Autres manuels PowerAcoustik Récepteur de voiture
PowerAcoustik
PowerAcoustik PD-712 Manuel utilisateur
PowerAcoustik
PowerAcoustik PACD-509 Manuel utilisateur
PowerAcoustik
PowerAcoustik PTID-8001NT Manuel utilisateur
PowerAcoustik
PowerAcoustik PADVD-740R Manuel utilisateur
PowerAcoustik
PowerAcoustik PADVD-330 Manuel utilisateur
PowerAcoustik
PowerAcoustik PD-701 Manuel utilisateur
PowerAcoustik
PowerAcoustik PL-52B Manuel utilisateur
PowerAcoustik
PowerAcoustik PADVD-220 Manuel utilisateur
PowerAcoustik
PowerAcoustik PTID-4360 Manuel utilisateur
PowerAcoustik
PowerAcoustik PTID-4003 Manuel utilisateur
PowerAcoustik
PowerAcoustik PD-650 Manuel utilisateur
PowerAcoustik
PowerAcoustik PADVD-110 Manuel utilisateur
PowerAcoustik
PowerAcoustik PDN-726B Manuel technique
PowerAcoustik
PowerAcoustik CPAA-70M Manuel utilisateur
PowerAcoustik
PowerAcoustik PADVD-240 Manuel utilisateur
PowerAcoustik
PowerAcoustik PAVN-4210 Manuel utilisateur
PowerAcoustik
PowerAcoustik PACD-703C Manuel utilisateur
PowerAcoustik
PowerAcoustik PACD-508 Manuel utilisateur
PowerAcoustik
PowerAcoustik PL-15PMP Manuel utilisateur
PowerAcoustik
PowerAcoustik PADVD-340TV Manuel utilisateur
