POWER PLUS MOBILITY INC. CAUTIONS
In order to achieve the correct inflating, please follow the instructions for the positioning below:
A. e wheelchair has a straight-backed position.
B. e arms should not rest on the armrest (Fig.3)(Fig.3).
A. Position the patient on the preinated cushion.
B. Connect the pressure gauge to one of the cushion’s 2 valves, making sure that the connection
is properly placed on the valve. Switch the pressure gauge back on if it is switched o.
C. Check pressure of each compartment and adjust it so that you obtain the proper ination
values as per the ination chart.
For this, there are two 2 possible cases:
C-1 e pressure gauge reading is higher than the ination value targeted or all of the indicator
lights will ash on and o (indicating a pressure level that is too high to be measured); in this
case, deate the cushion gradually using deation (Fig.1 indicator 3)(Fig.1 indicator 3). Make sure to get the user
o the cushion several times during this process in order to enable the air to circulate in the
compartment.
Each time you check or reinate the cushion, make sure you comply with the positioning de-
scribed in section 2. As is the case with most inatable items, it is recommended that you check
the pressure periodically (every 1 to 2 weeks on average).
Two years against any defaults in manufacture, as of the date of purchase by the customer. In
the even of default, please contact your retailer, and give them the serial number.
e warranty does not cover misuse of the support.
2- POSITIONING OF THE PATIENT (DURING THE INFLATING STAGES)
3- ADJUSTING THE PRESSURE (Fig.4)(Fig.4).
CHECKING AND REINFLATING THE CUSHION
GUARANTEE
