Power Innovations MPDU Manuel utilisateur

MNL151

Rev 4.3

Export Classification EAR99

READ THIS MANUAL CAREFULLY

SAVE ALL INSTRUCTIONS

This manual contains important information needed to operate the MPDUTM safely and

efficiently. Please read all instructions carefully before installing or operating equipment.

Keep this manual handy for easy reference.

ELECTRICAL WARNING

Applying information contained in this manual to any other

product, including customized Q-LS systems with

nonstandard specifications, may cause injury.

MPDU™, MPDS™, Q-LS™,Q-LS Uninterruptible Power Quality™, UPQ™, and UPQ-

NetAgent9™are trademarks of Power Innovations International, Inc.

This manual may accompany other instructional addendums about additional

customizations to standard MPDS™systems. Please contact Power Innovations if

additional manuals are needed and have not been received.

Product names mentioned herein may be trademarks and/or registered trademarks of

their respective companies.

Power Innovations International, Inc.; American Fork, UT, USA

MNL151-4.3 Revision 4/12/2023

Power Innovations—MPDU™User’s Manual i

TABLE OF CONTENTS

TABLE OF CONTENTS ..............................................................................................................................................I

SAFETY ...................................................................................................................................................................... III

SPECIAL INSTRUCTIONS..............................................................................................................................................

III

WARNINGS ..................................................................................................................................................................

III

IMPORTANT SAFETY INSTRUCTIONS ..........................................................................................................................

III

1. INTRODUCTION .....................................................................................................................................................1

1.1 DESCRIPTION ........................................................................................................................................................1

1.2 WTT MPDU Front Panel..................................................................................................................................... 3

1.3 WTT MPDU BACK PANEL .................................................................................................................................4

1.4 TSSC MPDU FRONT PANEL ...............................................................................................................................5

1.5 TSSC MPDU BACK PANEL ............................................................................................................................... 6

1.6 PTT MPDU FRONT PANEL................................................................................................................................. 7

1.7 PTT MPDU BACK PANEL ................................................................................................................................. 8

1.8 VMT MPDU Front Panel.................................................................................................................................... 9

1.9 VMT MPDU Back Panel............................................................................................................................... 10

1.10 WTT MPDU PROGRAMMABLE LOGIC CONTROLLER (PLC)......................................................................... 11

1.11 TSSC/PTT MPDU PROGRAMMABLE LOGIC CONTROLLER (PLC)................................................................ 12

1.12 VMT MPDU PROGRAMMABLE LOGIC CONTROLLER (PLC)......................................................................... 14

2. INSTALLATION.....................................................................................................................................................16

2.1 UNPACKING THE SYSTEM ..................................................................................................................................16

2.2 CONTENTS OF THE SYSTEM ...............................................................................................................................16

2.3 INSPECTION OF THE SYSTEM.............................................................................................................................. 16

2.4 SITE AND ENVIRONMENT CONSIDERATIONS..................................................................................................... 16

2.5 Q-LS OUTPUT CONNECTIONS ............................................................................................................................17

2.6 MPDU INPUT CONNECTIONS ............................................................................................................................18

2.7 Q-LS / MPDU DATA CONNECTION .................................................................................................................. 20

3. OPERATION ..........................................................................................................................................................21

3.1 PRE-START RE-CHECK .......................................................................................................................................21

3.2 OPERATING PROCEDURE.................................................................................................................................... 21

Startup Procedure................................................................................................................................................... 21

Shutdown Procedure...............................................................................................................................................21

4. TOUCHSCREEN..................................................................................................................................................22

4.1 MPDS™SOFTWARE USER GUIDE.................................................................................................................... 22

5. PROGRAMMABLE LOGIC CONTROLLER (PLC)..................................................................................... 23

5.1 PLC OVERVIEW................................................................................................................................................... 23

5.2 PLC INPUTS .........................................................................................................................................................23

5.3 PLC CONTROL .....................................................................................................................................................24

5.4APPENDIX A.........................................................................................................................................................24

6. PLC SOURCE CODE EXAMPLE ..................................................................................................................... 25

6.1INTRODUCTION ....................................................................................................................................................25

6.2I/OMAPPING........................................................................................................................................................ 26

ii |

6.3SMOKE ALARM TABLE ..........................................................................................................................................27

6.4FLOWCHART………............................................................................................................................................27

APPENDIX A –I/O MAPPING…….. ...................................................................................................................... 38

A.1BLOCK INSTRUCTGIONS FOR VMT...........................................................................................................25

APPENDIX B –WARRANTY ....................................................................................................................... 56

CONTACTING POWER INNOVATIONS …….. ................................................................................................. 57

MNL151-4.3 Revision 4/12/2023

Power Innovations—MPDU™User’s Manual iii

Important SafetyInstructions

This manual contains important instructions that should be followed during installation and for

maintenance of the MPDU™system.

CAUTION

Install the MPDU™system in a temperature-controlled indoor environment where it is clean, dry, and

free of conductive contaminants.

CAUTION

For safety, please ensure that all individual circuit breakers are in the OFF position prior to installing the

MPDU™system to the Q-LS™system. Serious injury or death may result from failure to ensure that

all power connections are OFF.

iv |

This page intentionally left blank.

MNL151-4.3 Revision 4/12/2023

Power Innovations—MPDU™User’s Manual 1

Q-LS

Battery Bank 2

(if used)

Q-LS

Battery Bank 1

Input

Figure 1—MPDS Topology

1. INTRODUCTION

1.1 Description

The Main Power Distribution Unit™(MPDU) is designed with three-phase 120/208 VAC input. The unit supplies

single-phase 120 VAC and three-phase 120/208 VAC output power. The MPDU comes in four varieties with

different power output options: The Weapons Tactical Trainer (WTT), the Training System Support Center (TSSC),

Parts Task Trainer (PTT), and the Virtual Maintenance Trainer (VMT). The MPDU serves as the main source of AC

power into the training device(s). The MPDU monitors the status and distributes power to all equipment requiring AC

power within the training devices.

The MPDU features a user-friendly touchscreen to access data, which is monitored by sophisticated software. The

intelligent monitoring software is easily accessible through the user-friendly touchscreen on the front side of the unit as

well as remotely through a TCP/IP Ethernet connection. Using the software, the user can access real time data and

event history of the unit, as well as data and historical event data from both the MPDU and the attached Q-LS™system.

MPDS Topology

Output

To Facility EPO

Q-LS

UPQ

2 |

Figure 2—MPDS VMT Block Diagram

MNL151-4.3 Revision 4/12/2023

Power Innovations—MPDU™User’s Manual 3

1.2 WTT MPDU Front Panel

1. Alarm Speaker: PLC controlled.

2. EPO Switch: Emergency Power OFF.

3. Touchscreen: Gives user access to MPDS™

status.

4. MPDU Total Hours: Total run time, in hours, of

the MPDU when the main input breaker (#10) is

ON.

5. MPDU Main Power Status Indicator LED:

Indicates the power input status of the MPDU. If

the LED is illuminated, the MPDU is receiving

input power, which means the main input breaker

(#10) is ON.

6. Trainer Power ON / OFF Button: Turns the

trainer power ON / OFF.

7. 30 Amp 1Ø Output Circuit Breakers: Activate or

deactivate 1Ø system output power.

8. 30 Amp 3Ø Output Circuit Breakers: Activate or

de-activate system 3Ø output power.

9. 50 Amp 3Ø Output Circuit Breakers: Activate or

de-activate system 3Ø output power.

10. 500A 3Ø MPDU Main Breaker with shunt trip:

Turns the MPDU output power ON / OFF.

11. 30 Amp-3Ø Power Distribution Indicator LEDs:

Indicate the power output status of the

connectors. If an LED is illuminated, the

receptacle is live.

12. 30 Amp 1Ø Power Distribution Indicator LEDs:

Indicate the power output status of the

connectors. If an LED is illuminated, the

receptacle is live.

13. EPO Delay Button: Activates EPO Delay.

14. MPDU Logic Power Breaker: Turns the MPDU

Logic ON/OFF.

15. USB Maintenance: Connects external equipment

to internal PC for user maintenance.

16. Ethernet Maintenance: Connects external

equipment to internal MPDU intranet.

17. 50 Amp 3Ø Power Distribution Indicator LEDs:

Indicate the power output status of the

connectors. If an LED is illuminated, the

receptacle is live

4 |

1.3 WTTMPDUBackPanel

1. Q-LS Communication Link: Connects the

MPDU to the Q-LS system.

2. RJ-45 Ethernet Port: Connects the MPDU

to the local network.

3. CPC Connector: TSS EPO Interface

4. DB-9 Connector: Connects temperature,

smoke, and other sensors to the MPDU’s

internal PLC Logic.

5. 30 Amp 1Ø Power Distribution Indicator

LEDs: Indicate the power output status of

the connectors. If an LED is illuminated,

the receptacle is live.

6. 30 Amp 1Ø Power Output Receptacles:

Connect the load to 30 Amp –120VAC

output power via L5-30 connectors.

7. 30 Amp-3Ø Power Distribution Indicator

LEDs: Indicate the power output status of

the connectors. If an LED is illuminated,

the receptacle is live.

8. 30 Amp-3Ø Power Output Receptacles:

Connect the load to 30 Amp –120/208

VAC output power via L21-30 connectors.

9. 50 Amp-3Ø Power Output Receptacles:

Connect the load to 50 Amp –208 VAC

output power via CS-8369 connectors.

10.50 Amp-3Ø Power Distribution Indicator

LEDs: Indicate the power output status of

the connectors. If an LED is illuminated,

the receptacle is live.

11.Input Gland Plate: Removable to allow

input and ground wire installation.

12.Grounding Studs/Plate: Single or multiple

(optional) ground attachment points allow

the grounding of other equipment to the

MPDU.

Autres manuels pour MPDU

Table des matières

Autres manuels Power Innovations Unité de distribution d'énergie

Power Innovations

Power Innovations MPDU Mode d’emploi

Manuels Unité de distribution d'énergie populaires d'autres marques

hager

hager SP 015 Manuel utilisateur

Pakedge

Pakedge PowerPak 9 Manuel utilisateur

Pts

Pts 9042 Series Manuel utilisateur

Shure

Shure WA405 Manuel utilisateur

CORNING

CORNING CCH 4U Manuel utilisateur

Panamax

Panamax M4LT-EX Manuel utilisateur

PANCONNECT

PANCONNECT FLAT 3M Manuel utilisateur

Raytheon

Raytheon 138-118 Manuel utilisateur

D&R ELECTRONICS

D&R ELECTRONICS PDU-6SS Manuel utilisateur

Botex

Botex PSA 322-6 DL Manuel utilisateur

GE QuiXtra 4000 Guide de démarrage rapide

RDL

RDL EZ Series Manuel utilisateur

StarTech.com

StarTech.com RKPW161915 Manuel du système

Vertiv

Vertiv Knürr DI-Strip Rack PDU Manuel utilisateur

ABB

ABB PSBS0065 Manuel

Baumuller

Baumuller BFN 3-1-0007-001 Manuel

Eaton

Eaton StructuredWiringSolutions ESWT41600 Manuel

GE GEK-45404F Manuel utilisateur