Power bass XL-42SS Guide de l'utilisateur

POWERSPORTS SPEAKERS

Application Guide

Please read through this manual to familiarize yourself with your new speakers. Should your

PowerBass Xtreme marine speaker ever require service, you will need to have the original dated receipt.

XL-42SS

XL-52SS

XL-62SS

XL-692SS

XL-82SS

Thank you and Congratulations

Congratulations on your decision to purchase PowerBass Xtreme™ speakers. You now own a speaker

of uncompromising design and engineering philosophy from a factory that truly believes in the relentless

pursuit of perfection. Incorporating the highest quality materials and state-of-the-art machinery, these

speakers display the ultimate balance between high ﬁdelity, extreme performance and long-lasting reliability.

At PowerBass USA, Inc. we are conﬁdent you will have many years of outstanding enjoyment from this

great speaker investment. For maximum performance, we recommend that you have your new speakers

installed by an Authorized PowerBass Xtreme Dealer. Doing so will also automatically extend your

warranty to the full THREE Year Period.

To learn more about PowerBass Xtreme, please visit us on the World Wide Web at

www.POWERBASSUSA.com

∆Caution ∆

Continuous exposure to sound pressure levels in excess of 100 dB or more can cause permanent hearing loss. PowerBass Xtreme

Speakers are capable of producing sound pressure levels well over 160 dB. Please observe all local sound ordinances while listening

to your PowerBass Xtreme system. PowerBass USA, Inc. accepts no liability for hearing loss, bodily injury, or property damage due to

the result of use or misuse of this product.

XL POWERSPORTS SPEAKERS FEATURES

Sealed Cone Design: A unique interior trampoline gasket seals the pole piece to protect the voice

coil from water and moisture. The interior surround and outer surround are constructed of synthetic

rubber for long life and UV resistance. This in conjunction with the Polypropylene cone material offers

increased performance even in exposed mounting locations.

25mm Mylar Dome Tweeter (20mm for XL-42SS): Large 1-inch Mylar tweeter with diffuser

to disperse highs evenly and ensure loud clean sound.

Weather Resistant Treatment: To better withstand the elements our XL Powersport speaker uses

a tough powder coated paint process on the speaker basket and grills. This hard ﬁnish is heat cured

and forms a “skin” over the metal to protect it from rust and corrosion.

Black and White Aluminum Mesh Grills: Aluminum mesh grills powder coated in Black and

White offer you a choice of colors suitable for marine or off-road use and are impervious to rust.

Gold Plated Connections: The connection terminals on the speaker frame have been gold plated

for protection against corrosion. The speaker wire provided is also terminated with gold plated

connectors for improved connectivity. Clear insulated sleeves have been added to provide further

protection against the elements.

Additional Features: Moisture sealed basket ring gaskets for a snug water tight ﬁt, marine grade

stainless steel hardware and pre-terminated speaker wires add further value to your investment.

SPECIFICATIONS FOR

POWERBASS XTREME POWERSPORT SPEAKER

(Due to Constant Improvements, Speciﬁcations and Parameters are subject to change without notice.)

Model Size Nominal

Impedance

Frequency

Response

Sensitivity

1W/1M

Power RMS/

Peak

XL-42SS 4” 3-ohm 100Hz-20kHz 87dB 40W/80W

XL-52SS 5.25” 3-ohm 70Hz-20kHz 87dB 50W/100W

XL-62SS 6.5” 3-ohm 65Hz-20kHz 88dB 60W/120W

XL-692SS 6x9” 3-ohm 45Hz-20kHz 89dB 80W/160W

XL-82SS 8” 3-ohm 40Hz-20kHz 90dB 125W/250W

XL-42SS XL-52SS XL-62SS XL-692SS XL-82SS

Speaker Dimensions 4” 5.25” 6.5” 6x9” 8”

in (mm) in (mm) in (mm) in (mm) in (mm)

Bottom-mounting depth 2 (50) 2.06 (52) 2.33 (58) 3.3 (85) 3.5 (89)

Cut-out diameter 4 (102) 4.5 (114) 5.6 (144) 6 x 8.7 (152 x 222) 7.4 (180)

INSTALLATION EXPERIENCE

Installation of off road and marine audio speakers can require extensive experience with a variety of

mechanical and electrical procedures. Although this application guide explains how to install PowerBass

Xtreme speakers in a general sense, it may not show the exact installation method for your particular

situation. If you feel unsure about personally installing the speaker system, don’t attempt the installation

yourself. Ask your Authorized PowerBass audio or marine dealer about professional installation options.

GENERAL INSTALLATION TIPS

Your PowerBass XL speakers were specially designed for providing high-ﬁdelity sound out in the harsh

environment. Despite their rugged construction, it is possible to damage your speaker if they are

improperly used. Overdriving the system causing the sound to distort will cause permanent damage to

the speaker. Playing loud music in a outdoor environment can permanently damage your hearing, as well

as limit your ability to hear other trafﬁc.

1. Be sure to carefully read and understand the instructions before attempting to install this product.

2. Turn off the audio system. For safety, disconnect the negative lead from the battery prior to

beginning installation.

3. For easier installation, we recommend that if additional wiring is required, you run all wires prior to

mounting your speaker in place.

4. The outdoor environment can quickly accelerate corrosion so always use the highest quality

connectors for a reliable installation and minimal signal or power loss.

5. Always use caution before you drill or cut! Be careful not to puncture gas tanks, fuel lines,

hydraulic lines or electrical wiring when working on any vessel or vehicle.

6. Never run speaker wires underneath the vehicle or exposed on a boat deck, keeping the wiring

behind cover provides the best protection from environmental elements.

7. Avoid running any speaker wire or signal cables near the vehicle’s electrical system to prevent

noise from “bleeding” into the audio system.

8. Correct speaker polarity must be observed. Speakers wired out of phase will have little bass

output. Follow the wiring directions carefully observing the color coded speaker wire.

9. Leave a little slack in the speaker wire for easier installation, this will prevent pulling or stretching

the wire and possibly causing a connection to come loose.

10. Always protect your speakers during installation; it is a good idea to keep the speakers in their

original package until they are ready to be mounted.

PREPARING FOR INSTALLATION

NOTE: The tools listed below may be required for proper installation

• An electric drill with drill bits

• Phillips-head and standard screwdrivers

• Wire strippers

• Crimping tool and needle-nose pliers

• Silicone sealant or closed cell weather-stripping

• Metal ﬁle (half round)

• Dust mask (when cutting into ﬁberglass)

• Hole saw or jig saw

• Punch or countersink tool

• Eye protection

NOTE: The stainless steel hardware supplied with your PowerBass Xtreme speakers has been

chosen to resist rust and corrosion. If the particular hardware supplied will not work for your

installation purposes, please be sure to use only appropriate marine grade (stainless steel)

mounting hardware.

INSTALLATION APPLICATION

Your PowerBass XL Powersport speakers are speciﬁcally designed for boating, side-by-side and UTV/

sport applications. Although the speakers do not require a sealed enclosure, air space behind the speaker

from 0.2 – 0.5 cu feet (6 – 15 liters) is recommended for best sound reproduction. To prevent the sound

coming off the front of the speaker from radiating back to sound from the rear of the speaker it is

recommended to use a factory location or ﬁnd a spot with a semi-isolated rear chamber (see Fig 1).

CAUTION: These speakers are designed to be water and spray resistant, they are not designed to

be submerged or withstand high pressure water spray. Care must be exercised when washing

your boat or off road vehicle to avoid damaging your speakers.

Fig. 1

SPEAKER LOCATION

The sound produced by your PowerBass XL coaxial speakers is directional. Find the best location for

stereophonic sound. Adding more PowerBass Xtreme speakers to the system will not only help to balance

the sound, but it will increase the power handling of the system enabling it to play louder.

After determining the best mounting locations, carefully check the areas where the mounting hardware

will be placed (see Fig 2). The installation surface must be level and the installation must be “watertight.”

No moisture or dampness should be allowed to get behind the speaker. Use caution to make sure there

are no objects behind the installation surface that may become damaged during drilling.

WARNING: These speakers must be installed at least 3 feet (1-meter) away from any electromagnetic

nautical equipment (ie., compass, sonar, etc).

Fig. 2

MOUNTING

The following drawing shows the typical flush mount installation into a fiberglass panel using the

supplied hardware.

NOTE: Be sure to use the supplied black putty to secure the mesh grill to the mounting ring.

Always follow proper safety procedures. Use eye-protection at all times and a dust mask and gloves when

cutting. Check both sides of the vessel before cutting any holes.

• Choose a ﬂat mounting surface that has sufﬁcient depth and air space behind it to accept the

speaker.

• Make sure the stainless steel mounting screws will not puncture the fuel tank, wiring or interfere

with any moving parts underneath the mounting surface.

• Use the supplied mounting template to mark the hole (see Fig 3)

• Cut the appropriate diameter hole using a hole saw or jigsaw (see Fig 4)

• Place the speaker in the hole (or use the mounting template) and mark the screw hole locations

using a sharp pointed tool.

• Remove the speaker and drill a pilot hole in each of the screw locations. It is advisable to use a hand

driven countersink tool on each hole to further inhibit gel-coat cracking of the ﬁberglass panels (see

Fig 5)

• Connect the speaker wire supplied as shown (Fig 6). Read the Wiring Procedures section on Page 10

for further wiring instructions before performing ﬁnal installation of the speakers.

• Place the speaker into the opening

• While holding the speaker ﬁrmly in place, screw in the mounting screws by hand carefully and

evenly. Do not over tighten as you fasten the speaker to the bafﬂe.

Fig. 3 Use template sheet inside

carton to trace onto mounting

location hole

Fig. 4 Cut hole Fig. 5 Drill pilot hole (see chart)

Fig. 6 Push onto correct size speaker terminal

Connect to radio

or ampliﬁer

WIRING PROCEDURES

Once the mounting holes have been cut, run the speaker wire from the speaker mounting locations back

to the radio. If you are running wires through bulkheads, drill holes for the cable and use a marine grade

grommet to properly insulate any rough edges from the wire insulation. Make sure the wires will clear any

mechanical devices in the boat and secure them with wire ties.

Carefully place the supplied speaker wire in a location that is free of standing water and moving

components. For reference the Red wire is Positive and the Black wire is Negative. Connect the gold plat-

ed female quick disconnect on the end of the supplied wire to the same color of wire on the gold plated

male connector attached to the speaker frame (see Fig 6). Make sure the clear insulated sleeves are

covering any exposed connections to protect them from corrossion. Connect the other end of the speaker

wire to the radio (or ampliﬁer) in accordance with its owner’s manual.

After connecting your new PowerBass XL Powersport speakers to the sound system you are ready to carry

out a listening test. Please listen the ﬁrst time at a low volume setting and check to make sure everything

is operating properly.

GENERAL CARE

The grills may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grills or speaker

cones, otherwise the UV inhibitors maybe affected and/or the grills may discolor.

Product Disposal – Certain international, national and/or local laws and/

or regulations may apply regarding the disposal of this product. For further

detailed information, please contact the retailer where you purchased this

product or the PowerBass Importer/Distributor in your country.

This manual is the exclusive property of PowerBass USA, Inc. Any reproduction of this manual, or use other than its intentions is

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Power bass Intervenants

Power bass

Power bass L-60Cx Guide de l'utilisateur

Power bass

Power bass XL-WB8 Manuel utilisateur

Power bass

Power bass XL-65SS Guide de l'utilisateur

Power bass

Power bass 2XL series Guide de l'utilisateur

Power bass

Power bass PS-ADF110T Guide de l'utilisateur

Power bass

Power bass 3XL-5202 Guide de l'utilisateur

Power bass

Power bass 4XL-80-94 MIDBASS Guide de l'utilisateur

Power bass

Power bass 2XL-53C Guide de l'utilisateur

Power bass

Power bass L-1A Guide de l'utilisateur

Power bass

Power bass 3XL-50C Guide de l'utilisateur

Power bass

Power bass 2XL-50C Guide de l'utilisateur

Power bass

Power bass 4XL-80T Guide de l'utilisateur

Power bass

Power bass XPRO-65CX Guide de l'utilisateur

Power bass

Power bass 3XL-653 Manuel utilisateur

Power bass

Power bass 2XL series Guide de l'utilisateur

Power bass

Power bass XL-PS200 Guide de l'utilisateur

Power bass

Power bass Xtreme XL Guide de l'utilisateur

Power bass

Power bass 2XL-4002 Guide de l'utilisateur

Power bass

Power bass OE692-TY Guide de l'utilisateur

Power bass

Power bass Xtreme XL Guide de l'utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur