- 3 -
04. GOOD TO KNOW
·
Qualcomm Quick Charge 3.0 Port (Port 1) is for charging device only. Please do not connect devices which do not require charging into the charging ports of this device
(e.g. USB Flash Drives, Card Readers, etc.). Qualcomm Quick Charge speed is only available for compatible devices.
·
The computer will automatically install the driver at the rst time when connecting to the Hub. Please wait for approximately ve seconds to allow the installation to complete automatically.
·
To operate the product smoothly, please make sure that the AC adapter is plugged in when using the product.
·
In order to enjoy the super speed of 5Gbps, your PC host and OS must fully support USB 3.0; otherwise it can only reach the speed of USB 2.0 standard.
·
To prevent damage to the contents of the USB/memory/media card, please ensure you are following the correct procedure for removing storage from the operating system you are using.
* In a Windows® operating environment, when the USB/memory/media card is rst connected, the Safely Remove Hardware icon will appear. Right-click on the icon, and select Safely Remove Hardware. When the Safely
Remove Hardware window appears, select USB Mass Storage Device, then click on Stop. This will, in turn, open the Stop a Hardware Device window. Select the USB Mass Storage Device again, and click on OK, then wait
for the operating system to notify you that it can now be safely removed.
* In a MAC OS operating environment, the added memory cards will appear on the desktop as disk drives. To safely remove the indicated drive(s), simply click and drag the icon to the Trash.
Please read this manual before using the device to ensure safe and proper use. Images may differ in appearance from the actual product. Content is subject to change without prior notice. Appearances
and specifications are subject to change without prior notice. Failure to comply with safety warnings and regulations can cause serious injury, property damage or death. This monitor stand securely
supports up to 9 kg (20 lbs). Do not place any monitors and devices heavier than the recommended weight limit. Do not use the device for anything other than its intended use. Your device may malfunc-
tion. Do not insert the device or supplied accessories into the eyes, ears, or mouth. Doing so may cause suffocation or serious injuries. Do not bite or suck the device. Doing so may damage the device
or result in an explosion or fire. Children or animals can choke on small parts. If children use the device, make sure that they use the device properly. The device can be used in locations with an ambient
temperature of 0°C to 40°C. You can store the device at an ambient temperature of -10°C to 50°C. Using or storing the device outside of the recommended temperature ranges may damage to the
device or reduce the device lifespan. Do not use damaged power cords or plugs, or loose electrical sockets. Unsecured connections can cause electric shock or fire. Use manufacturer-supplied power
adapter and micro B USB 3.0 cable. Using other power adapter and micro B USB 3.0 cable may shorten the life of your device or cause the device to malfunction. They may also cause a fire or cause the
devise to explode. Protect the device from damage. Avoid exposing your device to very cold or very hot temperatures. Extreme temperatures can damage the device and reduce the capacity and life
of your device. Keep your device dry. Humidity and liquids may damage the parts or electronic circuits in your device. Do not turn on your device if it is wet. Do not drop or cause an impact to the device.
Handle and dispose of the device with care.The device may explode when overheated. Follow all local regulations when disposing of used device. Never crush or puncture the device. Do not disassem-
ble, modify, or repair your device. Any changes or modifications to your device can void your manufacturer’s warranty. If your device needs servicing, take your device to a Service Center. Do not use your
device with the back cover removed. Doing so may result in damage or malfunction. Do not drop your device or cause impacts to your device. Your device may be damaged or may malfunction. If bent
or deformed, your device may be damaged or parts may malfunction. Do not touch the device, power cords, plugs, or the electric socket with wet hands or other wet body parts. Doing so may cause
electric shock. Do not pull the power cord excessively when disconnecting it. Do not bend or damage the power cord. Doing so may cause electric shock or fire. Do not use your device outdoor during a
thunderstorm. Doing so may result in electric shock or device malfunction. Please note that when removing USB/memory/media cards connected to the device, you are required to properly remove/eject
the device from within the operating system (i.e. in Windows, use the Safely Remove Hardware function). Failure to remove devices properly can result in lost data, or permanent damage to the USB
memory, Card Reader, or other devices. BROS&COMPANY INC. highly recommends that you back up all data on your storage device before using the device. BROS&COMPANY INC. is not responsible
for any data lost due to data transfer, formatting, partitioning or using a device. BROS&COMPANY INC. will not be held responsible for any damage to disk or hard disk data caused by improper use.
05. WARNING / CAUTION / NOTICE
