POS-X XP8200 Manuel utilisateur
Table of Contents
Chapter 1 Introduction………………………………………………………2
1.1 Features……………………………………………………………. …2
1.2 Outline……………………………………………………………… …3
Chapter 2 General Specification…………………………………..... …4
2.1 Tube Display………………………………………………………..…4
2.2 Electricity…………………………………………………………...…5
2.3 Overall Dimensions……………………………………………….…5
2.4 Environment………………………………………………………..…5
2.5 Driver Interface…………………………………………………….…5
2.6 User Settings……………………………………………………… …6
2.6.1FuctionSetting……………………………………………..………6
Chapter 3 Interface………………………………….... ...............8
3.1 Interface……………………………………………………………. …8
3.2 Interface Conversion Adapter………………………………….. …9
Chapter 4 Command Description……………………………….9
4.1 XP8200 Command Set…………………………………………...11
4.1.1 LD220 Command Mode……………………………………….11
4.1.2 EPSON Command Mode…………………………………......12
4.1.3 UTC Standard Command Mode…………………………….15
4.1.4 UTC Enhance Command Mode…………………………......16
4.1.5 AEDEX Command Mode………………………………….......16
4.1.6 ADM788 Command Mode…………………………….………17
4.1.7 DSP800 Command Mode……………………………………..18
4.1.8 CD5220 Command Mode……………………………………..19
4.1.9 EMAX Command Mode………………………………………..21
4.1.10 LOGIC Command Mode……………………………………..22
Chapter 5 Character Set…………………………………..........23
5.1 U.S.A. / Standard Character Set ( 20h - 7Eh)………………… .23
5.2 International Character Selection……………………………….23
5.3 Character Code Table……………………………………………..24
5.3.1 Page 0 (PC437: U.S.A., Standard Europe)………………24
5.3.2 Page 1 (PC863: Canadian-French)…………………….....26
5.3.3 Page 2 (Japanese Katakana)…………………………………27
Chapter 6 Setup XP8200 AP Guide …………………………………28
Chapter 7 Installation Guide…………………………………………....29
V2.5
Chapter 1 Introduction
1.1 Features
The XP8200 is Vacuum Fluorescent Displays which display 20 columns
and 2 lines, each columns is 5x7 dots.
Blue-green fluorescent color is easy on the eyes.
The display panel is movable so that it can be adjusted for the best viewing
angle.
The customer display have different height by adjusting the support.
The interface of XP8200 is RS-232, with baud rates select from 9600 or
19200 bps.
The customer display have provided the pass through function to reduce
the cable connection.
The user defined and international character sets are the standard of
customer display.
Supports 10 command modes, with EPSON command mode set as default
Supports power from 5V to 12V, it prevents any mindless use of improper
power input to cause malfunction
Easy configure & various settings through its free powerful set up software
i.e. Welcome message and plenty of code pages setting and others setting.
Control boards design in top panel to prevent water or wet counter surface
may damage from the bottom.
2
nd Choice round-shape mini base for space-saving, stable and ingenious
Panel is structured to easy-detachable and available for wall mounting
install and OEM
Attention
1. This specification shall apply only to the product(s) coming
along with this manual inside.
2. This manual may not apply to the previous or later product(s).
3. This specification may be modified without any notice. If it is
necessary for “customers” to have a latest manual about
specification, please inquire your suppliers.
1.2 Outline
The customer display outline has included of three parts: the panel, the
support, and the interface adapter
The standard VFD customer display should include following accessories:
Item Description Dimension (mm) Q’ty
1 Panel of XP8200 220(L)*87(W)*50(H) 1
2 Support 130 (H), 33 (Diameter) 2
3 Disk Including Manual and
setup AP 1
4 D-SUB 9 PIN RS-232 Cable 1600(Length) 1
5
<XP8200>
+5V PC 4P Plug Power Kit or
PS/2 Power Kit or
USB Power Kit or
100V~240V Universal Adapter (5V/2A) or
110V US or 230V Europe 2P Adapter
(5V/2A)
100(W) x 59(D) x 33(H)
76(W) x 51(D) x 31(H)
1
Above accessories may be different due to customers’ requirement
※
when delivery.
Chapter 2 General Specification
2.1 Tube Display
( I ) XP8200
Customer
Display
Vacuum Fluorescent Display
Blue Green
Display Pattern 5 x 7 Dot Matrix
Brightness 350~700 cd/m²
Character Type 95 Alphanumeric & 32 International Characters
Character Size 5.25 mm (W) x 9.03 mm (H)
Character Number 40 (20 columns x 2 lines)
Character Pitch Refer the figure 2.1
2.2 Electricity
Central Control Unit CPU : SM5964
ROM : 64K ROM
RAM : 32K SRAM
Speed CPU : 33 MHz
Connector 16 PIN Phone Jack Connector
9 PIN D-SUB Connector
25 PIN (Female) D-SUB Connector
Power Source DC + 5V~12V
Power Consumption 3 Watts Average (Maximum 15 Watts)
2.3 Overall Dimensions
Dimension of Panel
XP8200 : 220(L)* 87(W)* 50(H) mm
Dimension of Support
One Support: 217* 106* 248 mm
Two Support: 217* 106* 378 mm
Dimension of Base 217(L)* 106(W)* 33(H) mm
Viewing Angle 0°~60°
Horizontal Rotation 180°
Weight 980g
2.4 Environment
Operating
Temperature
+10 to +40℃℃
Storage Temperature -10 to +50℃℃
Relative Humidity 0% to 90% RH
2.5 Interface
Interface RS232 or USB
2.6 User Setting
The default protocol is 9600 bps, non-parity, 8 data bits, 1 stop bit
and with DTR/DSR control.
2.6.1 Function Setting
No switch, all user setting is set up by Application Program
(AP). Please find more illustration on Chapter 6.
( I ) Baud Rate Select
Function Description Baud Rate (bps)
9600
19200
( II ) Command Type Select
Function Description Software Defined
Command Type Hex Code
LD220 00
EPSON POS D101(default) 01
UTC Standard 02
UTC Enhance 03
AEDEX 04
ADM788 05
DSP800 06
CD5220 07
EMAX 08
LOGIC CONTEOL 09
( III ) International Character Set
Function Description
International Character
Set (Code 20H-7FH)
Code Table
(Code 80H-FFH)
U.S.A. PC-437 (USA)
(Standard European)
FRANCE PC-850 (Multilingual)
GERMANY PC-850 (Multilingual)
U.K. PC-850 (Multilingual)
DENMARK I PC-850 (Multilingual)
SWEDEN PC-850 (Multilingual)
ITALY PC-850 (Multilingual)
SPAIN PC-850 (Multilingual)
JAPAN Katakana
NORWAY PC-865 (Nordic)
DENMARK II PC-850 (Multilingual)
SLAVONIC/RUSSIAN PC-437 (USA)
(Standard European)
RUSSIAN PC-866
GREEK PC-737
CZECH PC-852
LATIVAIN PC-1257
Chapter 3 Interface
3.1 Interface
Specifications
Data Transmission Method : Asynchronous Serial.
Handshaking : DTR/DSR Control
Default Protocol : 9600/19200 bps, non-parity, 8 data bits, 1 stop bit.
Communication Protocol
1. Receive Data.
The DTR signal is as follows:
[HIGH] This indicates that the display isn't ready to receive data.
It depend on the following conditions:
The period from when the power is turned on to when the printer
first becomes ready to receive data.
When the remaining space in the receiving buffer becomes 128
bytes or less.
When the DTR signal of the printer is HIGH when the printer is
selected using the command.
[LOW] This indicates that the display is ready to receive data.
It depends on the following conditions:
When the printer first becomes ready to receive data after power-on.
When the remaining space in the receiving buffer becomes 128 bytes
or more.
When the DTR signal of the printer is LOW when the printer is
selected using the command.
2. Transmit Data.
After confirming the DSR is LOW, data is transmitted to printer.
3.2 Connector
(I) Connector for Host Computer
145
9876
32
PIN Assignment
Pin No. Signal I/O Description
1 NC No Connection
2 TXD- OUTPUT Transmit Data
3 RXD INPUT Receive Data
4 DSR INPUT Data Set Ready
5 GND Power GND
6 DTR OUTPUT Data Terminal Ready
7 CTS Clear To Send
8 RTS Request to Send
9 By Selection N.C. or +5V ~ +12V
(II) Passthru Mode
XP8200-PASS 1
For the printer with ESC/POS command
XP8200-PASS2
For the printer without ESC/POS command
Table des matières
Autres manuels POS-X Moniteur
