Portech IS-670 Manuel utilisateur
IS-670 IP POE Wall Mount Speaker
User Manual
PORTech Communications lnc.
Contents
1. Brief Introduction ......................................................................................................................................... 1
2. Product Package Content: ........................................................................................................................ 1
3. PoE In ector connection structure diagram ............................................................................................ 2
4. Web picture.................................................................................................................................................. 3
5. Set the main interface ................................................................................................................................ 4
6. Network (Network Environment) .............................................................................................................. 5
6.1 Status (network status) ...................................................................................................................... 5
6.2 WAN Setting (WAN network setting) ............................................................................................... 6
6.3 SNTP Setting ....................................................................................................................................... 7
7. SIP Setting ................................................................................................................................................... 8
7.1 Service Domain (broad system server registration setting) ......................................................... 8
7.2 Port Setting (SIP and RTP port setting) .......................................................................................... 9
7.3 Codec Setting (voice format setting) ............................................................................................. 10
7.4 Audio Setting provides speaker volume and sound detection function. .................................. 11
7.5 Other Setting ..................................................................................................................................... 12
8. Update ........................................................................................................................................................ 13
8.1 Update New Firmware ..................................................................................................................... 13
8.2 Default Setting ................................................................................................................................... 15
9. System Authority ....................................................................................................................................... 16
10. Save Change .......................................................................................................................................... 17
11. Reboot...................................................................................................................................................... 17
12. Waterproof network oint suite assembly example ........................................................................... 18
IS-670 User manual
1
1. Brief Introduction
A IP broadcast system is composed of a microphone, broadcast software (Windows computer)
and IP Loudspeaker (or audio receiver). The IP speaker is connected through internetwork. The
broadcast can be in human voice and scheduling. The scheduling broadcast function is to play
audio (MP3/WAV) in computer at appointed time, as well as edit group function to conduct group
broadcast or multipoint broadcast. The system composition is simple. It is unnecessary to have
wiring or purchase an amplifier or player if there is a network environment. The system’s host and
loudspeaker shall be set. The audio receivers can be installed in the broadcast system, to have
network broadcast function.
2. Product Packa e Content:
I. IP Speaker(IS-670) host X 1
main body size : 270 X 150 X 195
270 X 150 X 195 270 X 150 X 195
270 X 150 X 195 mm
II. RJ45 waterproof oint's composite set
contains
(1) nework oint X1
(2) the body of network oint's waterproof connector X1
(3) flexible gasket X1
IS-670 User manual
2
III. PoE in ector (non-standard 30W) X 1
3. PoE Injector connection structure dia ram
LAN port : RJ-45 network port(PoE) ; connected to PoE In ector through network cable
P+D/OUT port conducts network connection and power supply
IS-670 User manual
3
4. Web picture
Step 1: open IE browser (or other browser software), input [http://192.168.0.100]
Step 2: enter [Login WEB] picture, input [Username & Password (defaults: username: voip，
Password: 1234)] data, and then click [OK] to enter the equipment management interface
after confirming the password is correct (as shown in the following picture).
Step 3: enter the syste to see[
System Information], providing view of Model Name and Firmware
Version, Codec Version, etc. (as shown in the following picture).
IS-670 User manual
4
5. Set the main interface
It provides the following function items: Network, SIP Setting, System Auth, (Account and
Password Change), Save Change, Update and Reboot.
(1).Network : Network provides Status and WAN Setting
(2).SI Settings
: SIP Setting provides Service Domain (SIP registration setting)，Port Setting (SIP and RTP
ports setting)，Code Setting (voice format setting)，Audio Setting (loudspeaker volume
and sound detection setting)，Other Setting.
(3).Update : Update (firmware updating) provides Firmware (firmware updating)，Default Settings (factory
reset).
(4).System Authority : System Auth (Account and Password change) provides change of user's account and
password.
(5).Save Change : Save Change provides setting of save change environment.
(6).Reboot : Reboot provides the function of rebooting a device.
IS-670 User manual
5
6. Network (Network Environment)
6.1 Status (network status)
Network Status (network status) picture shows the date of current network environment status (as shown in
the following picture).
Column Introduction
Master Show the network environment data of the network port (WAN
port)
Type Show current network connection mode
IP Show set or gained network address data
Mask Show set or gained network coding data
Gateway Show set or gained preset gateway data
MAC Show MAC position data of the machine
IS-670 User manual
6
6.2 WAN Setting (WAN network setting)
WAN Setting (WAN network setting) picture provides WAN network connection mode.
WAN Setting Provide WAN port network environment setting data
IP Type Preset to be DHCP Client network mode. Provide Fixed IP, DHCP
Client (automatically obtain an IP address) and PPPoE mode.
Fixed IP: set IP address manually.
DHCP Client (automatically obtain an IP address): automatically
obtain an IP address.
PPPoE (connect PPPoE): adopt PPPoE connection mode.
IP Show IP address data. Show gained or set IP address data.
Mask Show subnet mask data. Show gained or set subnet mask address
data.
Gateway Show preset gateway data. Show Show gained or set preset gateway
address data.
DNS Server1 Preset to be 168.95.192.1; show gained or set first DNS server's
address data; IP or Domain Name can e input
DNS Server2 Preset to be 168.95.1.1; show gained or set second DNS server's
address data; IP or Domain Name can e input
MAC Show MAC position data of the machine
PPPoE Setting Provide PPPoE connection data
User Name Set connection account name, in which figures or strings are available
Password Set connection account password, in which figures or strings are
available
Submit [key] Execute storage and change setting.
Reset [key] Clear input data.
* Press [submit] to finish stora e settin after chan in the data to be adjusted, and select
the main menu's [SaveChan e], to execute stora e chan e settin , the system will restart
automatically *
IS-670 User manual
7
6.3 SNTP Setting
SNTP Settin picture provides server address and timing time.
Column Introduction
SNTP Preset to be On (start); timing function. Turn off timing
function when it is set to be Off.
Primary Server Preset to be time.windows.com; the first syn-position
timing server address. Input IP or Domain Name
address.
Secondary
Server
Preset to be 208.184.49.9; the second syn-position
timing server address. Input IP or Domain Name
address.
Time Zone Preset to be GMT + 08:00 (hh:mm); timie zone material.
Sync. Time Preset to be 1:00:00 (1 day); timing time. Correct the
host time every a certain peroid.
Submit [key] Execute storage and change setting.
Reset [key] Clear input data.
* Press [submit] to finish stora e settin after chan in the data to be adjusted, and select
the main menu's [SaveChan e], to execute stora e chan e settin , the system will restart
automatically *
IS-670 User manual
8
7. S P Setting
7.1 Service Domain (broad system server registration setting)
Service Domain (registration setting) picture provides registration account data and state.
* Press [submit] to finish stora e settin after chan in the data to be adjusted, and select
the main menu's [SaveChan e], to execute stora e chan e settin , the system will restart
automatically *
Column Introduction
Active Preset to be Off; put the account into use. Put the
registration account into use when it is set to be On.
Register Name Input registration name data. Input digits or string.
Register Password Input registration password data. Input digits or string.
IPB Server Input the registration broadcast system's server data.
Input IP or Domain Name address.
Status Show current registration status data. Not Register
(failed), Register (successful).
Table des matières
Autres manuels Portech Intervenants
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur