POP UP MI TOWER STAIRS Manuel utilisateur
ASSEMBLY GUIDE
FOR MI TOWER STAIRS
+44 (0)1244 833 933 info@popupproducts.co.uk popupproducts.co.uk
MI TOWER
STAIRS
CONTENTS
CONTENTS
INTRODUCTION
KNOW YOUR MI TOWER STAIRS
KNOW YOUR MI TOWER STAIRS’S COMPONENTS
KNOW YOUR KIT LIST AND SPECIFICATIONS
KNOW YOUR STORAGE AND TRANSPORT PACK
REGISTRATIONS
1
2
3
4-5
6
7
8
BEFORE YOU START
GETTING STARTED
9
10
11
12
13-14
15-17
18
ASSEMBLY GUIDE
FOR MI TOWER STAIRS
INTRODUCTION
Mi TOWER STAIRS is an access tower system complying with BS 1139 Part 6, EN 1004:2004 and Work
at Height Regulations, with vertical ladder access, designed for a maximum platform loading of 150kg.
Platform heights are 2.2m to 4.7m internal and external.
Tower designation - EN1004-3-4.7/4.7-D
Our priority is to help ensure the safe operation of our products, so please pay particular attention to the
safety tips on pages 9 and 10.
We want you to enjoy the safe and responsible use of your Mi TOWER STAIRS with the minimum of fuss
and this guide is designed to get you up and running as quickly and as safely as possible.
We recommend that you read this guide prior to assembling and using Mi TOWER STAIRS.
Scan this QR code to view the Mi TOWER STAIRS on our website.
Visit PASMA for further reference.
www.pasma.co.uk/training/towers-on-stairs-course
www.popupproducts.co.uk
Page 2
KNOW YOUR Mi TOWER STAIRS
Page 3
1
2
3
4
4 RUNG FRAME
TOE BOARD SET
2 RUNG FRAME
EASY-LOCK STABILISER
PARTS LISTING
5
6
7
8
GUARDRAIL BRACE PANEL
KNOW YOUR Mi TOWER STAIRS’S COMPONENTS
Page 4
1 GUARDRAIL BRACE PANEL
Hooks are tted to the guardrail brace panels and each has an
automatic locking jaw which is released by simply moving the jaw’s
trigger. The hook must only be attached to the frame with the
opening facing outward. Attachment with the jaw’s opening
facing inward will not fully protect the user if lent upon and
may cause serious injury or death. Always ensure that each
hook is positively locked in position before using your Mi TOWER
STAIRS.
The Easy-Clip frame clip’s pin locates into a retaining hole in the
frames to lock tower sections together when placed one on top of
the other. The pin is locked in place by a red tab to ensure that it
remains in place. From the disengaged position, pivot the pin/tab
to bring the pin horizontal. Insert the pin fully through the retaining
hole with its tail pointing down. Next ip the tab vertically to lock
the pin in place.
Removal is simply a reversal of the tting sequence.
The Easy-Lock clamps are used to secure the stabilisers to Mi
TOWER STAIRS’s vertical tubing. With the clamp jaw open, oer it
to the tube. Bring the jaw around the tube and set the buckle on
to the hook, then close the black clamp arm to lock the stabiliser in
position. A similar clamp is tted to the stabiliser extension leg.
The Wind-Lock catch is a drop down jaw tted to the side of the
hatch platform’s mounting hook and prevents the platform from
lifting in windy conditions. It is attached to the horizontal tube of
the frame. To disengage, simply lift and hold the jaw as you raise
the platform clear.
KNOW YOUR Mi TOWER STAIRS’S COMPONENTS
Page 5
The adjustable leg with rubber foot allows for secure positioning of
your Mi TOWER STAIRS in relation to your workplace. The leg can
be extended or retracted to allow for levelling and the rubber foot
prevents slipping.
The walk-through gate frame includes a gate/ladder which is used
to access the upper levels of the Mi TOWER STAIRS and once
unlocked and opened, allows access into and through the base of
the MiSTAIRS. To open the gate/ladder remove the clip and lift the
gate/ladder upwards. It can now be swung inwards or outwards to
allow access.
The vertical tubes also feature positioning rings that will be used
when building the Mi TOWER STAIRS and allow the guardrail brace
panel hooks to be correctly positioned.
A set of conjoined frames can be created by disengaging the frame
clips on one four rung frame and tting it to a second four rung
frame. Engage and apply the Easy-Clip frame clips to lock the two
frames together.
Page 6
4 RUNG FRAME
GUARDRAIL BRACE PANEL
2 RUNG FRAME
TOE BOARD SET
GROUND CONDITIONS
3.55
3.65
9.35
3.25
0.91
9.29
2.01
5.15
Weight (Unit)
kg
3
4
1
4
4
1
1
1
67.69
150kg
2.2m
qty
2
4
1
4
4
2
1
1
73.43
150kg
2.7m
qty
7
4
2
7
4
1
1
1
100.99
150kg
4.2m
qty
6
4
2
7
4
2
1
1
106.73
150kg
4.7m
qty
KNOW YOUR STORAGE AND TRANSPORT PACK
Page 7
TRANSPORT AND STORAGE
For ease of storage and of transportation, Mi
TOWER STAIRS has been designed so that all
components can be safely stored within the Mi
TOWER STAIRS trolley assembly. See illustration.
Product shown is Mi TOWER STAIRS 2.7m
TROLLEY COMPONENTS
1
2
3
4
5
GUARDRAIL BRACE PANEL X2
4 RUNG FRAME X2
TOE BOARD SET
ADJUSTABLE LEG AND CASTOR X4
REGISTRATIONS
Page 8
Page 9
ALWAYS Read and understand this guide before you begin assembly.
Ensure that all safety requirements are met and that Mi TOWER STAIRS is the correct access solution
for the task you wish to perform.
Ensure that Mi TOWER STAIRS is assembled and dismantled by a quali ed, competent person.
Cordon o both the uppermost and lowermost access points of the staircase on which the Mi
TOWER STAIRS tower is to be used on.
Wear the correct Personal Protective Equipment for the task being performed. Gloves, steel toecap
boots, a hard hat and suitable clothing must be worn by all persons.
Tie back long hair and remove items of loose jewellery.
Perform a full risk assessment prior to assembling or using Mi TOWER STAIRS and abide by your ndings.
Prevent access to unauthorised persons if you have no other option but to leave Mi TOWER STAIRS
unattended and if this is not possible then MiSTAIRS must be dismantled.
Carry tools and materials safely retained in a tool belt that allows freedom of movement.
Ensure you properly assess the risk / method if tools or materials are hoisted to the platform via a
rope.
Access platforms from within Mi TOWER STAIRS and via the walk-through gate frame and 2 rung
frame positioned at the platform’s trap door end. Keep your feet in the middle of the rungs and grip
the upper rungs with your hands.
Erect Mi TOWER STAIRS on the steps of a staircase that is capable of supporting its own weight, the
user and any tools or materials without ex or movement.
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
Autres manuels pour MI TOWER STAIRS
1
Table des matières
Autres manuels POP UP Matériel de construction
