Polygroup TG90M4D80C01 Manuel utilisateur

Fig. A - Tree Stand Assembly

Click

Pull apart the legs of the stand so that they

are snapped into an x-shape, place the tree

stand on a level surface.

To close the stand, press the metal button

and fold the legs together.

*Electrical Rating For The Tree

(For Indoor Use Only)

2.55A 120V 60Hz

Fig. B - Tree and Light Assembly

MODEL #: TG90M4D80C01

3. Each tree section is numbered with a sticker. Please identify all sections before assembling.

4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting

into the assembled stand. Make sure the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all wires are free of

branch hinges.

7. Connect the plug(s) securely to the extension cord(s) as per the color labels indicated in Fig. B and insert the green label

extension cord plug into the wall outlet.Your entire tree should now be lit.If some bulbs do not light or flickers, search for

any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly in order to maintain the performance and

life expectancy of your pre-lit tree.

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions below on how to quickly

and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

Section 2

Section 3

Section 1

Insert

Green Label

Plug Into Wall

Outlet

Insert Yellow Label

Plugs Into Yellow

Labeled Extension Cord

Assemble

Red Labels

Together

Tree top

NEED HELP?

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR 1-888-919-0070

STORAGE INSTRUCTIONS

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected according to the color labels indicated in Fig.B and the

power cord is plugged into the wall outlet. Refer to assembly guide for instructions.

2. Please check for blown fuses at the light string plugs and power cord plug. Replace as needed.

Note: Please make sure to use appropriate replacement fuses as indicated on the light string plug and power cord plug.

3. Please check for loose, broken or missing light bulbs and replace as needed.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure

using the retainer washer. (See Fig. D)

TROUBLESHOOTING TIPS

Each tree includes hinge pins/washers, and for pre-lit trees spare bulbs and fuses are also included. If extra parts are needed,

please contact our customer service center.

SPARE PARTS

CUSTOMER SERVICE FOR CHRISTMAS TREES

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at

1-888-919-0070 or visit our website at www.polygroupstore.com.One of our customer service representatives will be

happy to assist you.

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

Customer Name:

Address(No P.O. Boxes):

City & State:

Zip Code:

Day Phone:

Date Purchased:

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches

to fill any gaps.Your Christmas tree is now complete and ready to be decorated.

8. Begin to shape the branches and tips working from the bottom to the top.Start with tips farthest from the pole and fan

out one to the right, one to the left and one at the center of the main stem. (See Fig. C)

Top view Side view

Fig. C

1. Remove all ornaments and decorations.For pre-lit trees, first unplug extension cord from the wall outlet and then

disconnect light extension cord between each section of the tree.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole

in both directions. Lift up the upper pole again.

4. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until

the bottom section is removed from the tree stand.

5. Carefully place all tree sections into shipping box and tape it shut.

6.When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or

humidity may damage your tree.

7. Keep out of reach of pets and children.

Autres manuels Polygroup sapin artificiel

Polygroup

Polygroup TGF0M3P07L02 Manuel utilisateur

Polygroup

Polygroup Evergreen Classics TG76P4A52P06 Manuel utilisateur

Polygroup

Polygroup TG66M3545X01 Manuel utilisateur

Polygroup

Polygroup H208532 Manuel utilisateur

Polygroup

Polygroup Evergreen Classics AR-P20008A Manuel utilisateur

Polygroup

Polygroup TG76M2AFBD00 Manuel utilisateur

Polygroup

Polygroup TG90M3U06C00 Manuel utilisateur

Polygroup

Polygroup TG76M4244L09 Manuel utilisateur

Polygroup

Polygroup TG76P4751D18 Manuel utilisateur

Polygroup

Polygroup TG76P4223L21 Manuel utilisateur

Polygroup

Polygroup TG76M4E28D01 Manuel utilisateur

Polygroup

Polygroup TG70M3V05C00 Manuel utilisateur

Polygroup

Polygroup TG76M3P51C00 Manuel utilisateur

Polygroup

Polygroup TG76M2S99L01 Manuel utilisateur

Polygroup

Polygroup TG90P3499L00 Manuel utilisateur

Polygroup

Polygroup TG76M3S45C02 Manuel utilisateur

Polygroup

Polygroup Corona TG50ON041P00 Manuel utilisateur

Polygroup

Polygroup TV70M4I13C01 Manuel utilisateur

Polygroup

Polygroup TGC0M4907C02 Manuel utilisateur

Polygroup

Polygroup TV50P3907C00 Manuel utilisateur

Polygroup

Polygroup TG76P6059D02 Manuel utilisateur

Polygroup

Polygroup Home Heritage TG90M3ABAD02 Manuel utilisateur

Polygroup

Polygroup Ashland TG76M4G64D02 Manuel utilisateur

Polygroup

Polygroup TV40M4F65C00 Manuel utilisateur

Manuels sapin artificiel populaires d'autres marques

Trim a Home

Trim a Home TY-S6-250L Manuel utilisateur

Sears

Sears Donner & Blitzen M44814 Manuel utilisateur

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Manuel utilisateur

Costway

Costway CM23595US Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Manuel utilisateur

Holiday Living

Holiday Living TV40EH339C01 Manuel utilisateur

CASARIA

CASARIA DBGB001 Manuel utilisateur

Alpine

Alpine CRD100L-WT Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Manuel utilisateur

CASARIA

CASARIA 104006 Manuel utilisateur

Alpine

Alpine CRD111S-GN Manuel utilisateur

Home Accents Holiday

Home Accents Holiday 1001540584 Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Manuel utilisateur

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Manuel utilisateur

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Manuel utilisateur

Home Accents Holiday

Home Accents Holiday 1004363936 Manuel utilisateur

Polytree

Polytree TG66EH148C17 Manuel utilisateur