Polygroup AR-P18006 Manuel utilisateur
ASSEMBLY INSTRUCTIONS MADE IN CHINA
Top view Side view
Fig. C
MODEL #: AR-P18006
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
TREE ASSEMBLY INSTRUCTIONS
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top.Start with the bottom section and remove protective cap
before inserting into the assembled stand.Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all
wires are free of branch hinges.
7. Connect light string and adaptor plugs as indicated in Fig. B, and plug it in to the wall outlet.Your tree
should now be lit. If not, please see TROUBLESHOOTING TIPS.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from
the pole and fan out one to the right, one to the left and one at the center of the main stem. (see Fig. C)
9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform
look. Shift branches to fill any gaps.Your Christmas tree is now complete and ready to be decorated.
Fig. B - Tree and Light Assembly *Electrical Rating For The Tree
(For Indoor/Outdoor Use)
Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions
below on how to quickly and easily set up your new tree.
1
Section 2
Tree top
Section 1
Assemble
Red Labels
Together
Assemble
Blue Labels
Together
Assemble
Yellow Labels
Together
Insert
Green Label
Plug Into Wall
Outlet
Plug Adaptor
Into Wall
Outlet
Insert Green
Label Extension
Cord into Adaptor
Assemble
Purple Labels
Together
Input: 120V, 60Hz,0.16A
Output: 29V 0.28A 0.85A120V, 60Hz
Fig. A - Tree Stand Assembly
Click
Pull apart the legs of the stand so that they
are snapped into an x-shape, place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
ASSEMBLY INSTRUCTIONS MADE IN CHINA
2
STORAGE INSTRUCTIONS
TROUBLESHOOTING TIPS
SPARE PARTS
1. Remove all ornaments and decorations. Unplug from power source, and disconnect all light string and
adaptor plugs.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to
remove from section below and fold all branches toward the pole.
3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and
rotate the upper pole in both directions. Lift up the upper pole again.
4. Continue by gently lifting straight up each section(s) from the section below and fold all branches
toward the pole until the bottom section is removed from the tree stand.
5. Carefully place all tree sections into shipping box and tape it shut.
6. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to
excessive heat or humidity may damage your tree.
If The Tree Does Not Illuminate
1. Check to make sure that all plugs and/or adaptors are properly connected as indicated in Fig. B.
2.Turning the poles gently to make sure pole to pole are connected into place.
3. Check for loose connection between light string plugs and extension cords.
Loose Hinge Pin
1. Extra hinge pins are included for repairing the hinges.
Place the branch into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure
using the retainer washer. (See Fig. D)
Each tree includes hinge pins/washers, and spare bulbs. If extra parts are needed, please contact our
customer service center.
Fig.D
WARNING
1. Use only the adaptor supplied with this product. Using a different adaptor will damage the lights
and cause fire, electrical shock hazards.
2. FOR INDOOR USE ONLY.
3. The external flexible cable or cord of this product cannot be replaced; If the cord is damaged,
the luminaire shall be destroyed.
Simply press the selector button of the light controller to select from
the following motion effects:
(1) STEADY GLOW (2) CHASER (3) SHUFFLE
(4) STARFIELD (5) RAY GUN (6) TWINKLE
(7) SPARKLE (8) 123-321 (9) SHIMMER (10) COMBO
HOW TO USE THE LIGHT CONTROLLER
Light Controller
Selector
Button
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.When
products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting
(GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
c. This seasonal use product is not intended for permanent installation or use.
d. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h. This is not a toy. For decorative use only! To avoid risk of fire, burns, personal injury and electric shock it
should not be played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or extension cords as this may damage wire insulation.
ASSEMBLY INSTRUCTIONS MADE IN CHINA
ASSEMBLY INSTRUCTIONS MADE IN CHINA
l. Do not cover the product with cloth, paper or any material not part of the product when in use.
m. Read and follow all instructions that are on the product or provided with the product.
n. The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.
o. For LED string only. Risk of fire.This product does not contain lamp shunts, which allow the product to
operate if one lamp burns out. Lamps are non-replaceble.
p. For LED string only.To reduce the risk of fire or electric shock, Do not attempt to replace lamps or
modify string.
q. SAVE THESE INSTRUCTIONS.
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact
us at 1-888-919-0070 or visit our website at www.polygroupstore.com. One of our customer service
representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address(No P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
3
CAUTION:
1. Risk of fire. Do not replace lamps with other than the spare lamps provided with this product.
2.To reduce the risk of fire and electric shock:
a. Do not mount or support light strings in a manner that can cut or damage wire insulation, and
b. Use only the power supply cord provided with this product.
Autres manuels Polygroup sapin artificiel
Polygroup
Polygroup TG76P4826P15 Manuel utilisateur
Polygroup
Polygroup TG76P2657D30 Manuel utilisateur
Polygroup
Polygroup TG76M3S45C01 Manuel utilisateur
Polygroup
Polygroup TG90M6010X00 Manuel utilisateur
Polygroup
Polygroup TG76M4244C01 Manuel utilisateur
Polygroup
Polygroup TG70M4D84C03 Manuel utilisateur
Polygroup
Polygroup TG76P4772D12 Manuel utilisateur
Polygroup
Polygroup TG70M2Y43L02 Manuel utilisateur
Polygroup
Polygroup TG66M3I70C12 Manuel utilisateur
Polygroup
Polygroup TG66M3O27C00 Manuel utilisateur
Polygroup
Polygroup TG76M2S99L01 Manuel utilisateur
Polygroup
Polygroup TG90P4525D01 Manuel utilisateur
Polygroup
Polygroup TG76CH092C08 Manuel utilisateur
Polygroup
Polygroup TV70M3AJNC06 Manuel utilisateur
Polygroup
Polygroup TG46M6159C00 Manuel utilisateur
Polygroup
Polygroup TG80M4C25C00 Manuel utilisateur
Polygroup
Polygroup TV70M3AP6C01 Manuel utilisateur
Polygroup
Polygroup TG70P4842D03 Manuel utilisateur
Polygroup
Polygroup TG76P5458D00 Manuel utilisateur
Polygroup
Polygroup TG76M3AW3M00 Manuel utilisateur
Manuels sapin artificiel populaires d'autres marques
Trim a Home
Trim a Home TY-S6-250L Manuel utilisateur
Sears
Sears Donner & Blitzen M44814 Manuel utilisateur
BETHLEHEM LIGHTING
BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manuel utilisateur
Home Accents Holiday
Home Accents Holiday TG76P3D93L08 Manuel utilisateur
Costway
Costway CM23595US Manuel utilisateur
Home Accents Holiday
Home Accents Holiday TG76P4C15D03 Manuel utilisateur
Home Accents Holiday
Home Accents Holiday 1001540584 Manuel utilisateur
Home Accents Holiday
Home Accents Holiday TG90P3F28D00 Manuel utilisateur
Williams-Sonoma
Williams-Sonoma TG46P4368L01 Manuel utilisateur
Trim a Home
Trim a Home 7.5 ft. Berkshire Fir Tree Manuel utilisateur
Home Accents Holiday
Home Accents Holiday 1004363936 Manuel utilisateur
Polytree
Polytree TG66EH148C17 Manuel utilisateur