Polycom Remote Control Mode d'emploi
The Polycom™ Remote Controller
Place or Answer a call End a call
Adjust camera/Navigate menus Confirm menu selection/perform
functions on highlighted items
Return to Home Screen Return to previous screen
Increase/decrease sound YOU hear Select Far site camera/video source
Zoom in/out Select Near site camera/video source
Show/hide picture-in-picture
Mute the sound you’re sending
Auto camera tracking on/off Store camera preset; Delete all
camera presets
Select camera/video source
Display onscreen keyboard Delete letters/numbers
Enter letters/numbers;
Move camera to a stored
preset
Start/stop sending content Access online help
General Operating Instructions
System Turn-On:
Turn on the monitor
Turn on the Main Power Switch (Will illuminate when “On”)
System Shut-Down:
Turn off the Main Power Switch
Turn off the monitor
(CAUTION: The monitor is a projection system similar to an LCD projector. The fan
may continue to run after the switch is turned off. This is normal and necessary to
properly cool the projection bulb. Unplugging the unit prior to the fan shutting down may
result in incomplete bulb cooling and shortened bulb life and/or damage.)
Recording a Session:
Click Camera button and select VCR.
Using the VCR remote control, press REC.
To place a call:
There is no need to place a call. Your video unit is set up to auto answer. The
Video Bridge will initiate the call at the scheduled time. Make sure your video unit is
on before the conference start time.
To hang up from a call:
There is no need to hang the call up. The Video Bridge will disconnect at the end of the
conference. If you hang it up before the end of the conference the Video Bridge will keep
reconnecting your site until the end of the conference
Camera Control
You can use the remote control to select the main camera or any other near-site video
sources, such as document cameras, laptops, VCRs or DVD players.
1. If you are in a call, press Near to select your video sources. Far-end camera
control is not supported.
2. Press Camera on the remote control. Then press the number for the camera or
other video source you want to select at the near or far site. For example, press 1 to
select the main camera. The image from the camera or video source you selected
appears on the screen.
Press the arrow buttons on the remote control to move the camera up, down, to the
left, or to the right.
Press Zoom to zoom out or in.
Setting and Using Camera Presets:
To store a preset:
1. Adjust the camera’s position:
•Press the arrow buttons on the remote control to move the camera up,
down, to the left, or to the right.
•Press Zoom to zoom the camera out or in.
2. Press Preset on the remote control.
3. Press and hold a number to store the preset position. To store a double-digit
preset (10-99), hold the second number down.
Note: Any existing preset stored at the number you enter is replaced.
To view your presets:
Press Preset on the remote control.
Note: Icons for presets 0-9 are shown on the screen. The colored icons indicate stored camera positions,
and the gray icons indicate available presets
To move the camera to a preset:
1. If a call is connected, press
2. Press a number from 0 to 99.
Note: The camera moves to the preset position for the camera or other video source.
To delete all presets:
1. If a call is connected, press Near
2. Press Preset on the remote control.
3. Press Delete to delete all presets.
Note: You cannot delete just one preset. Instead, override an existing preset with the new
camera position.
Changing your view
Your unit is set up for Dual Emulation. You have several choices on how you view your
video display. Pushing the Picture-in-Picture (PIP) button will allow you to scroll through
the different views.
Adjusting Volume:
Use the remote control to raise or lower the volume of the sound you hear. Changing the
volume affects only the sound you hear at your site. You cannot adjust your outgoing
audio. If the other sites have turned up their volume and your audio level is low, check
the placement of your microphones
To adjust the volume:
Press Volume.
Muting the Microphone:
It is important to mute the local audio during a conference to prevent interrupting the
main presenter or teacher. Remember the video is switched based on sound, and that all
sites in the conference will see your location if someone speaks, coughs or rustles paper if
your audio is unmuted.
To mute or unmute the microphone:
Press Mute on the remote control.
Note: If you see Near on your screen, your microphone is muted. To unmute your microphone, press
Mute on the remote control.
Showing Content and Video Sources
You may show the following to the far sites:
•Any information stored on a laptop or PC
•A paper document or object placed on a document camera
•A videotape or DVD
You can share one type of content or one video source at a time, and you can switch to a
different type of content or video source if you need to. Participants at other sites can also
share content or video sources.
Showing Content from a Laptop or PC:
You can attach a laptop or PC and show content that is stored on the computer. If your
computer is connected, you can also share content from network locations. When you
share content from a laptop or PC, the far sites see just what you see on the computer
screen.
Using a Document Camera, VCR, or DVD Player:
Before the call begins:
1. Make sure the document camera, VCR, or DVD player is connected and
powered on.
2. Position your document or object in the document camera or insert the
videotape or DVD.
To start showing a document, object, videotape, or DVD in a call:
1. Press Camera on the remote control.
2. Select a video source.
3. Press on the remote control.
To stop showing a document, object, videotape, or DVD in a call:
1. Press Camera on the remote control.
2. Select the main camera.
3. Press on the remote control.
IF YOU ARE EXPERIENCING
VIDEO PROBLEMS, TECHNICAL
SUPPORT IS AVAILABLE AT
THE FOLLOWING NUMBERS:
TROUBLE LINE: 1-800-567-8345
Available during scheduled conferences
OR
DDN: 605-773-3333 Available Monday – Friday
8:00 am to 5:00 pm
Table des matières
Autres manuels Polycom Télécommande
Polycom
Polycom RealPresence Instructions de montage
Polycom
Polycom RealPresence Group Series Instructions de montage
Polycom
Polycom Vortex EF-IR11 Manuel utilisateur
Polycom
Polycom RealPresence Group 700 system Manuel utilisateur
Polycom
Polycom EFIR10 Manuel utilisateur
Polycom
Polycom S203 Manuel utilisateur
Polycom
Polycom Vortex EF-IR11 Manuel utilisateur
Polycom
Polycom HDX Desktop Systems Manuel utilisateur
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
