2. how to activate call forward.
1. Press the menu button on the handset and select EXT. SERVICE
2. Select CALL DIVERS. and select the wanted type of call forward.
3. Select FORWARD NUMBER and type the wanted call forward
destination number.
3. How to deactivate call forward.
1. Press the menu button on the handset and select EXT. SERVICE
2. Select CALL DIVERS. and select OFF.
4. Call Waiting ON/OFF.
To activate this feature set the call waiting checkbox on in the administration
window. When call waiting is enabled a call waiting tone will be heard in the
handset during a conversation when another party is calling you. To switch between
the two conversations use the R-key. The enabling of call waiting is a general setting
and affects all handsets in the system.
5. R-Key ON/OFF.
To limit the functionality on the system it is possible disable the R-key function on
the handsets. When the checkbox is set on, the R-key is enabled. This feature is a
general setting and affects all handsets in the system.
6. Notify ON/OFF.
This setting is mainly used to adapt to Alcatel and Avaya PBX. When the Notify
checkbox is set on the ISDN IWU card sends a notify user hold or a notify user
retrieval (ISDN layer 3 message) during a call transfer. When set to off the Notify
messages are not send. Experience has shown that Alcatel and Avaya PBX react to
these massages by disconnecting the call.
7. Simulate Alert.
The Simulate Alert setting makes the ISDN IWU card to send the Alerting message
faster to the PBX to open the speech channel. Under normal conditions this is always
set to off.
8. Number Eater.
This feature deletes the first digit on outgoing calls. Calls from handset to handset
are not affected. When the checkbox is set to on the number eater is enable. Example:
Number dialled: 12345. Number transferred to the ISDN interface: 2345.
9. One digit dialling.
This feature makes it possible to select what digit should be used for outgoing prefix.
When a number is dialled beginning with this digit the call is transferred directly to
the ISDN interface without first being analyzed in the internal numbering plan. This
is typically used to enable the user to hear the public trunk dial tone when pressing
the outgoing prefix.
14129600-HD, Ed.008/ Page 10
