Polycom SoundPoint IP 335 Mode d’emploi

Polycom SoundPoint IP Phones: Reboot and Reset

Factory resetting a phone to its defaults is time-consuming and not generally

recommended as a troubleshooting step, except as a last resort.

You should not factory reset a phone to address call quality issues.

Objective

To factory reset a Polycom SoundPoint IP phone.

Please Note:

• Factory resetting a phone will restore the device to its factory default state, erasing all personalized

settings, speed dials, line keys, and configuration.

• These procedures specifically concern the Polycom SoundPoint and SoundStation IP series of

phones. See here for the VVX series.

Applies To

• Polycom Soundpoint IP Phones

Procedure

To restart or reboot

For each model listed below, press and hold the indicated keys in combination:

•IP 335: 2, 4, 5, 6

https://support.8x8.com/equipment-devices/phones/polycom/polycom-soundpoint-ip-phones-reboot-factory-reset

Updated: Wed, 17 Aug 2022 00:03:44 GMT

•IP 550, 560, and 670: First and third Line Keys, Directories, Applications

•IP 4000 and 6000: 4, 6, Soft Key 2

•IP 5000: 2, 4, Soft Key 2

•IP 7000: 2, 5, Up and Down Arrows

If You Know Your Phone's Administrator Password

To restore phone to factory defaults with the Admin Password:

1. Power cycle the phone.

2. Press Cancel soft key during the boot process.

3. During the countdown, press and hold the following dial pad keys simultaneously until the password prompt

appears:

◦ IP 335, 560, 5000, and 7000: 1,3,5,7

◦ IP 550, 670: 4,6,8,*(star)

◦ IP 4000 and 6000: 6,8,*(star)

4. Enter the administrator password to initiate the reset.

◦Note: For letters in lower case use ( a -> 1A ) * for the period # for the /

5. Press OK.

If You Don't Know Your Administrator Password

To restore a third-party phone to factory defaults (or when you otherwise can't access the Admin Password):

1. Power cycle the phone.

2. Press Cancel soft key during the boot process.

3. During the countdown, press and hold the following dial pad keys simultaneously until the password prompt

appears:

◦ IP 335, 560, 5000, and 7000: 1,3,5,7

◦ IP 550, 670: 4,6,8,*(star)

◦ IP 4000 and 6000: 6,8,*(star)

4. Enter the MAC ID of the phone. (The MAC ID/address should be visible on a label on the underside of the phone.)

◦Note: For letters in lower case use ( a -> 1A ) * for the period # for the /

5. Press OK.

Once this is done, the phone should boot up to running sip.ld, and then come online. The whole process may take

several minutes to complete.

If the phone gets stuck at Network Initializing or Waiting for Network to Initialize, verify proper network connection.

If you see any other errors, please search this site for troubleshooting instructions.

https://support.8x8.com/equipment-devices/phones/polycom/polycom-soundpoint-ip-phones-reboot-factory-reset

Updated: Wed, 17 Aug 2022 00:03:44 GMT

Note: Resetting to factory defaults will also reset the administrator password (factory default

password is 4 5 6).

How to Perform a Hard Reset

Use the below steps if the following is met:

• The phone is on a boot loop and no longer going to the home menu

• The default password or mac password doesn't work

• If it's a 3rd party phone

• The account is already canceled and you cannot access Account Manager or Admin Console to download the

extension CSV

1. Reboot the phone and wait for the starting application.

2. While the phone is in the starting application wait for the cancel button to appear then press it.

3. The phone will show a 7 seconds count down. This is the only open window to press the key combination to go to

the hard reset page.

◦VVX series (VVX300, 301, 310, 311, etc): Press and hold 1 3 5 within the 7-second count down until it

prompts you to the password page

◦Sound Point IP 335: Press and hold 1 3 5 7 within the 7-second count down until it prompts you to the

password page

◦Sound Point IP series (IP550,560,570, etc): Press and hold 4 6 8* within the 7-second count down until it

prompts you to the password page

◦Conference Phone IP5000, 6000, 7000: Press and hold 1 3 5 7 within the 7-second count down until it

prompts you to the password page

4. Enter the device's MAC ID as the password (e.g 0004f28619dc).

5. Press the 2nd soft key that corresponds to the mode or (encoding) to change it to A->abc or a->abc.

6. Then (for example) to select the letter F, press the 3key three times.

Video References

For VVX series:

•Factory Reset Polycom VVX Phones VVX400, VVX300

For SoundPoint IP series:

•How To Reset Polycom 550 Phone With Unknown Admin Password or 456 ot Working

https://support.8x8.com/equipment-devices/phones/polycom/polycom-soundpoint-ip-phones-reboot-factory-reset

Updated: Wed, 17 Aug 2022 00:03:44 GMT

Autres manuels pour SoundPoint IP 335

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Polycom Téléphone IP

Polycom

Polycom SoundStation IP 7000 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Polycom

Polycom SoundPoint IP 601 Manuel utilisateur

Polycom

Polycom SoundPoint IP 550 Manuel utilisateur

Polycom

Polycom VVX 500 series Manuel utilisateur

Polycom

Polycom VVX 350 Manuel d'instructions

Polycom

Polycom SoundStation IP 5000 Manuel utilisateur

Polycom

Polycom SoundPoint IP 600 SIP Manuel utilisateur

Polycom

Polycom CX700 Manuel utilisateur

Polycom

Polycom VVX 300 Manuel utilisateur

Polycom

Polycom VVX 310 Manuel utilisateur

Polycom

Polycom SoundPoint IP 300 Manuel utilisateur

Polycom

Polycom SoundPoint IP 560 Manuel d'instructions

Polycom

Polycom VVX 311 Manuel utilisateur

Polycom

Polycom VVX 500 series Manuel utilisateur

Polycom

Polycom SoundStation IP 5000 Manuel d'instructions

Polycom

Polycom Integra VVX 500 Manuel utilisateur

Polycom

Polycom SoundPoint IP 550 Manuel utilisateur

Polycom

Polycom SoundPoint IP 600 Manuel d'instructions

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Polycom

Polycom SoundPoint IP 331 Manuel utilisateur

Polycom

Polycom Soundpoint 331 Manuel utilisateur

Polycom

Polycom SoundPoint IP 430 SIP 2.0 Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur

Fiberme

Fiberme FAP260 Series Manuel utilisateur

Meridian

Meridian M5009 Manuel utilisateur