Polycom SoundPoint 320 Manuel utilisateur

VirtualPBX.com | 111 N. Market St., Suite 1000, San Jose, CA 95113 | Toll Free: 800.914.VPBX | Fax: 888.825.0800

SoundPoint IP Phones Manual Configuration

This guide will show you how to manually setup a Polycom SoundPoint 320, 321, 330, 331, 335, 450, 550, 560,

650, 670 phone for use with VirtualPBX. Please be sure that your Polycom phone is using firmware version 3.

1. Login to your VirtualPBX account as an Admin

2. Click on the Admin Tab

3. Click on the VoIP Phones menu option on the left hand side

4. Click on Add Softphone

VirtualPBX.com | 111 N. Market St., Suite 1000, San Jose, CA 95113 | Toll Free: 800.914.VPBX | Fax: 888.825.0800

5. Click on Add 3rd Party Softphone

6. Record the username, password, and server

Configuring Your Phone

The following steps are for manually provisioning a new Polycom

SoundPoint IP phone or one that has been reset back to factory

defaults. If in doubt, reset your Polycom SoundPoint back to its

factory default settings (instructions at end of document).

7. Start up your phone and identify its IP address. You can find

your phone’ s IP address by going to the Status section within the

menu. Once in the Status section, click on the Network option

and select TCP/IP Parameters. Example: 192.168.1.123

8. Point your browser to the phone’s web interface by typing

http:// and the phone’s IP address. Example: http://192.168.1.123

9. You’ l l now need to register your Polycom SoundPoint with

VirtualPBX. Click on the Lines tab to begin.

10. In the Identification section of the Lines tab:

a. Set Address to the username combined with

virtualpbx.net, as shown to the right.

b. Set Auth User ID to the username

c. Set A uth Password to the extension’ s password

d. Set Label to the name you want to appear on

the phone’ s display

VirtualPBX.com | 111 N. Market St., Suite 1000, San Jose, CA 95113 | Toll Free: 800.914.VPBX | Fax: 888.825.0800

11. In the Server 1 section of the Lines tab, do the following:

a. Set Address to the IP address of the VirtualPBX machine. Example: registrar1.virtualpbx.net

b. Set Port to 5060, which is the default

12. In the Server 2 section of the Lines tab, do the following:

a. Set Address to the IP address of the VirtualPBX machine. Example: registrar2.virtualpbx.net

b. Set Port to 5060, which is the default

13. Click the Submit button at the bottom of the page. Your Polycom phone will restart itself and after it’s finished

rebooting, your phone will register itself with VirtualPBX.

Optional: Factory Reset Polycom SoundPoint IP Phone

If your Polycom phone was locked or automatically provisioned with your previous provider, follow these steps

to prevent the previous configuration from interfering with your VirtualPBX service before you configure your

phone (steps 7-13 above).

1. Unplug the power cord

2. Wait 10 seconds

3. Plug phone back in, then immediately press and hold all of these buttons:

• For IP 320/321, 330/331/335, 430, and 560 phones: 1,3,5,7

• For IP 301, 501, 550, 600/601, and 650 phones: 4,6,8,*

• For IP 4000 phones: 6,8,*

4. Once this is done, enter the admin password: 456

Autres manuels pour SoundPoint 320

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Polycom Téléphone IP

Polycom

Polycom VVX410 Manuel utilisateur

Polycom

Polycom SoundPoint IP 335 Manuel d'instructions

Polycom

Polycom SoundPoint IP 430 SIP Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Polycom

Polycom SoundStation IP 5000 Manuel utilisateur

Polycom

Polycom VVX 600 series Manuel utilisateur

Polycom

Polycom VVX 300 Manuel utilisateur

Polycom

Polycom SoundPoint IP 600 SIP Manuel utilisateur

Polycom

Polycom VVX 350 Manuel utilisateur

Polycom

Polycom VVX 300 Manuel utilisateur

Polycom

Polycom VVX 1500 C Manuel d'instructions

Polycom

Polycom VVX 450 Manuel utilisateur

Polycom

Polycom SoundPoint IP 560 Manuel utilisateur

Polycom

Polycom VVX 350 Manuel d'instructions

Polycom

Polycom CX600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 500 Manuel utilisateur

Polycom

Polycom VVX 601 Series Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Polycom

Polycom VVX 300 Manuel utilisateur

Polycom

Polycom SoundPoint 500 IP Manuel utilisateur

Polycom

Polycom SoundPoint IP 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 501 Manuel utilisateur

Polycom

Polycom SoundPoint 500 IP Manuel utilisateur

Polycom

Polycom SoundPoint IP 320 Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur

Fiberme

Fiberme FAP260 Series Manuel utilisateur

Meridian

Meridian M5009 Manuel utilisateur