Pokini Tab E11 Manuel utilisateur
Tab E11
Quick Start Guide
2
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Compliance
Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of Communications. This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of the device.
Caution:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the
equipment.
CE mark. Declaring compliance to all the applicable European Union (EU) directives. For CE mark related questions:
ENGLISH
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to
exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the
U.S. Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting
at the specified power level in different channels.
3
Be sure to keep the power cord away from
younger children
Please ensure the user understand the following:
• As with all electrical products, precautions should be observed during handling and use to prevent electric shock.
The power supply (adapter) should not be handled by the children.”
• The computer, power supply, battery pack or power cord should not be dropped, crushed, stepped on or otherwise abused.
• Ensure the user understand the safe and proper handling of power cord and power supply. Misuse could result in serious injury.
• The user should periodically inspect the computer; power supply and power cord for damage and replace it, if necessary.
• Do not leave the computer plugged in or “on” when enclosed in a non-vented container, such as a backpack,
as overheating may occur.
• It is recommended that user should take a 5-minute break every 30 minutes of use.
.
Safety Precautions
The followings are the precautions for environments while using the product:
1. Do not place near the fire or other sources of heat.
2. Do not expose to magnetic fields.
3. Do not expose to direct sunlight.
4. Do not expose to rain or moisture.
5. Do not place heavy objects to add heavy pressure on the computer.
6. Do not drop the computer.
Caution:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS. TO PREVENT POSSIBLE HEARING DAMAGE,
DO NOT LISTEN AT HIGH VOLUME LEVELS FOR LONG PERIODS.
4
Package contents
One laptop One AC adapter
Digital pen (optional) Macro lens (optional)
This guide Thermal probe (optional)
Carefully unpack your box and take out the items listed below. If any of the items are missing or damaged, please contact your
dealer immediately:
ENGLISH
5
Tablet layout
Front
1Rotatable camera Often for taking self-portraits as well as for video conferencing.
2Microphone Mainly for sound and speech recording
3Touchscreen The main display of your laptop and a see-touch device. You can look at it and also touch
it with your fingers to control it.
4Power button Press it to power on/off your laptop.
5Windows key Press here to open the Start menu.
6Touchpad Allows you to control your system using figure gestures
1
2 3
4
5
6
6
ENGLISH
Front end
7 7
7Speaker The sound system has two speakers for playing music, notification sounds, and other
audio data.
Right 8 9
8Digital pen holder This is where you rest the provided digital pen.
9Digital pen Use it to perform touch operations and typing comfortably as if you were doing them
with your own fingers.
Left
10 USB Type-C port Plug your USB Type-C supported devices here.
Plug the provided adapter here to charge the battery.
11 Charging indicator It shows the charging status of your laptop. It shows blue when the battery is fully
charged.
12 Micro SD card slot Plug your micro SD card here
13 USB Type-A port Plug your USB Type-A devices here.
14
Combo Audio jack
for microphone/
headphone
Plug your 3.5mm headphone here
10 11 12 13 14
7
Digital pen
Function keys
15 16
15 Barrel button
This button provides two functions in default:
- Right click: Perform a touch on your desired item or object with the button being pressed.
- Selecting items or objects: Press and hold this button and drag your pen on the screen
over the desired items or objects to select them.
16 Eraser button
With the button being pressed, the tip of your digital pen acts like an eraser and enables
you to erase the content previously made on the touch screen.
- This button may require the support from your application.
The following function keys are no need to press Fn to make them work.
Mute or unmute your system.
Decreases the volume level.
Increases the volume level
Switches display output between your display,
external monitor (if connected) and both.
Decreases the display brightness
Increases the display brightness.
Opens the Settings screen.
Play or Pause
Push here to talk to Cortana, if available.
8
ENGLISH
Folding the keyboard
This laptop supports a swiveling 11.6-inch touchscreen that
can be used in several different ways. Opening the device as a
standard laptop gives you access to the keyboard and touch-
pad, while folding the keyboard behind the screen turns it into
a tablet. You also can prop the notebook’s screen up in stand
mode, which is ideal for viewing videos and presentations.
Your rotatable camera
Form the angle at which the camera facing forward, you can
adjust the camera angle downward to make it facing down at
an angle of 35 degree.
Or, you can turn it over a full 200 degree to use it like a
rear-facing camera.
Powering ON/OFF
1. If this is the first time you turn this computer on,
connect the AC adapter and fully charge the battery.
2. Press the power button (normally 1 to 2 seconds).
You shall see the screen turning on.
Powering on your computer
The laptop will require you to do the initial setup, which including:
- Activate your Windows 10
- Sign in to or create your Microsoft account
- Setup a wireless connection and more
Please follow the instruction to complete the initial setup.
Powering on for the first time
9
Folding the keyboard
Save all your data before powering your computer off.
To power off your system, following the steps below:
By Start menu
1. Click the Windows icon in the low-left corner of the
Desktop. Or, press on the Windows key in the keyboard.
2. In the Start menu, click the Power icon, as shown on
the right,
3. Select <Shut down> from the power option menu,
as shown on the right
Powering off your computer
When you will be away from your computer for a short time, put the computer to sleep. Do one of the following:
• Close the display panel
• Press the power button briefly one time.
• Open the Start menu and then select <Power> › <Sleep>
Powering off your computer
Do one of the following:
• Pressing the power button briefly one time.
• Pressing the windows key.
• Tapping the touchpad, or opening the display panel.
Note: It is recommended that you put your computer to sleep before you move it. Especially, if your laptop comes with a
traditional hard disk, instead of a modern SSD, moving your computer while the hard disk is spinning can sometimes damage the
hard disk, causing loss of data.
Waking up your computer
Basic touchpad operations
The touchpad works like a traditional mouse. With it, you can move the cursor and perform left-click, right-click, double-click
actions. However, the actual available actions are application dependent.
10
ENGLISH
Left-clicking (or Clicking) Tap once on the touchpad surface or press once on the low-left corner of the touchpad.
Right-clicking Press once on the low-right corner of the touchpad.
Dragging Press and continue to hold down the left corner and then move (drag) your finger across the touchpad surface.
Vertical scrolling
Drag two fingers up or down on the touchpad.
Horizontal scrolling
Drag two fingers left or right on the touchpad.
Basic touchpad operations
When you fold your laptop into a tablet, it is ideal for you to use your fingers or the digital pen to perform many actions on it.
- Don’t use sharp objects to touch the screen. Or, the screen may be damaged or scratched.
- Don’t touch the touchscreen with a conductive material. It may cause a malfunction.
- The supporting functions are application dependent.
Tap
Touch once on an item to start an app, open a link, or perform an optional function. This is similar to a left-click
with a mouse.
Double-tap
Slightly press twice with your finger to select an item.
Press and hold
Press and leave your finger on an item. This brings up detailed information or opens a menu with more options
for the item. This is similar to a right-click with a mouse.
Table des matières
Autres manuels Pokini Comprimé
Pokini
Pokini tab E10B Manuel utilisateur
Pokini
Pokini Tab K11 Manuel utilisateur
Pokini
Pokini Tab E10W Manuel utilisateur
Pokini
Pokini Tab K11B Manuel utilisateur
Pokini
Pokini FT 7M Manuel utilisateur
Pokini
Pokini Tab M10 Manuel utilisateur
Pokini
Pokini Tab K11 Manuel utilisateur
Pokini
Pokini Tab A6 Manuel utilisateur
Pokini
Pokini Tab K10B Manuel utilisateur
Pokini
Pokini Tab K10 Manuel utilisateur
Pokini
Pokini K11 Manuel utilisateur
Pokini
Pokini Tab A8 Manuel utilisateur
Pokini
Pokini Tab A10B Manuel utilisateur
Pokini
Pokini Tab G10 Manuel utilisateur
Pokini
Pokini K10 Manuel utilisateur
Pokini
Pokini Tab K10B Manuel utilisateur
Pokini
Pokini Tab A8B Manuel utilisateur
Pokini
Pokini FT 10M Manuel utilisateur
