Point Mobile PM95 Manuel utilisateur
v1.0, Jan 2024
Copyright © 2024 Point Mobile Co., Ltd. All rights reserved.
Point Mobile Co., Ltd. is the designer and manufacturer of mobile handheld devices.
The Point Mobile logo is a registered trademark and symbol of Point Mobile Co., Ltd.
Features and specifications are subject to change without prior notice.
PM95
Quick Start Guide
2
Device Parts
1. Receiver
2. LED indicator
3. Audio jack with cap
4. Power button
5. Scan button (Left)
6. Volume buttons
7. I/O connector for cradle
8. (Scanner SKU) USB connector
(Non-scanner SKU)
USB connector with cap
9. Speaker
10. Microphone
11. Touch screen
12. Front camera
11
1
8
3
7
6
2
4
5
9
10
12
Non-scanner SKU
8
Scanner & Non-scanner SKU
14
17
16
15
13
18
19 20
21
13. Hand strap holes
14. Rear I/O connector
15. (Scanner SKU only)
Scanner
16. Emergency button
17. Rear camera & Flashlight
18. Push-To-Talk button
19. Battery release buttons
20. Scan button (Right)
21. Battery
3
Device Parts
1. Receiver
2. LED indicator
3. Audio jack with cap
4. Power button
5. Scan button (Left)
6. Volume buttons
7. I/O connector for cradle
8. USB connector
9. Speaker
10. Microphone
11. Touch screen
12. Front camera
11
1
8
3
7
6
2
4
5
9
10
12
MSR/ICCR SKU
14
17
16
13
18 19
20
21
15
13. Rear camera & Flashlight
14. Wrist band hole
15. MSR/ICCR
16. Scanner
17. Emergency button
18. Push-To-Talk button
19. Battery release buttons
20. Scan button (Right)
21. Battery
4
Product Standard Accessories Battery Replacement
1. Insert the battery from the bottom side (opposite side of the
battery release buttons).
2. Push the battery down until it clicks.
Confirm that the battery release buttons are completely outward,
and the bottom side is fully engaged.
Insert Battery
Remove Battery
LCD protection film
AC Plug
Battery pack Charger
1. Hold the battery release buttons and press in.
2. While pressing the battery release buttons in, pull the battery up.
open
close
open
close
Hand strap
(Scanner & Non-scanner SKU) Wrist band
(MSR/ICCR SKU)
5
Supported Cards & Card Slot Cover
PM95 provides
•1 microSD card slot
•1 nano SIM card slot –WWAN SKU only
Remove the battery, and open the card slot cover to find card slots.
You can use the handle on the bottom side of the cover to open.
Card slot layout
(WWAN SKU)
< Notice >
Do not throw away the cover. It affects device sealing performance against
water, dust, etc.
1. Gently slide the card holder left, and swing upwards to open the
holder.
2. Put the proper card with the contacts facing down, close the
holder, and gently slide it right to lock.
Install SD / SIM Card
1 2
4
SD
SIM
3
6
Turning on /off
Press and hold the power button on the left side until SMART
BEYOND RUGGED logo displays on the screen.
Turn on
When the display is on, press and hold the power button until the
power menu is shown.
Then, tap Power off.
Turn off
Charging the Device
1. Assemble the AC plug and charger, and rotate the plug
clockwise to engage firmly.
2. (Non-scanner SKU only) Open the USB connector’s cap.
3. Connect the cable to the USB connector.
4. Provide power by plugging the power adapter to the wall socket.
PM95 can also be charged with charging cradle (sold separately).
< Caution >
1. Always use an original charger or cradle from Point Mobile. Other
chargers may damage the PM95. The device warranty does not cover
any damage caused by the usage of non-original chargers.
2. Make sure the charger and cable is not wet.
3. Charge in temperatures from 0
℃ to 45℃.
7
LED Indicator
2
1
No
Indicator
Status
Indication
1
Power
LED
Solid
green
Device
is fully charged
Solid
red
Charging
the device
/
Battery is low
Blinking
red
Charging temperature is out of
normal range
/ Battery is very low
Alternately blinking
red
&green
Cannot
recognize the battery
2
Notification
LED
Blinking
blue
Notification
existing
Red
flash
Barcode
reading failed
Blue
flash
Barcode
reading success
Scan a Barcode
Center the cross-hair aimer or red dot aimer over the barcode. You
can tilt the aimer slightly for a comfortable angle to scan.
Scanner is disabled by default, so enable the scanner from
ScanSettings first.
Check if the scanner icon is placed on the Status bar. Then,
press a scan button on the device to scan a barcode.
< Notice > Scanner is equipped on scanner SKU and MSR/ICCR SKU.
8
Certification
Support
•Model: PM95
•Trade name of certified: Point Mobile Co., Ltd.
•Manufacturer : Point Mobile Co., Ltd.
•For more certificate information,
go to Settings > About phone > Certificates.
•ARS : +82-1800-3010
•FAX : +82-3397-7872
•Address : 9F Kabul Great Valley, 32, Digital-ro 9-gil,
Geumcheon-gu, Seoul, Korea 08512
•Website : https://www.pointmobile.com
•E-Mail : [email protected]
Autres manuels Point Mobile Téléphone portable
Point Mobile
Point Mobile PM67 Manuel utilisateur
Point Mobile
Point Mobile PM45 Manuel utilisateur
Point Mobile
Point Mobile PM80 Manuel utilisateur
Point Mobile
Point Mobile PM60 Manuel utilisateur
Point Mobile
Point Mobile DOT-PM80 Manuel utilisateur
Point Mobile
Point Mobile PM86 Manuel utilisateur
Point Mobile
Point Mobile PM75 Manuel utilisateur
Point Mobile
Point Mobile PM45 Manuel utilisateur
