PodSpeakers MicroPod Manuel utilisateur
MicroPod Bluetooth
User manual / Guide de l’utilisateur
PODSPEAKERS
by Scandyna®
LANGUAGES /
4 English
12 Français
CONGRATULATIONS!
on the purchase of your new MicroPod Bluetooth from Scandyna
Thank you for choosing MicroPod Bluetooth from Scandyna.
We encourage you to please read this manual to properly
acquaint yourself with MicroPod Bluetooth and its features.
We hope that you will enjoy the sound of MicroPod Bluetooth
and welcome you into the Podspeaker family.
// 4
ENGLISH /
5 Welcome to a new world of sound
6 Back panel
7 Connection and operation
Running-in period
8 Safety instructions
10 Limited warranty
// 5
ENGLISH / Welcome to a new world of sound
MicroPod Bluetooth combines unique design with high quality audio for your smartphone, tablet, laptop,
TV and all bluetooth enabled devices.
For obtaining the maximum Hi-Fi stereosound experience, we highly recommend to pair the
MicroPod Bluetooth with the MicroPod SE and MicroPod Sub or The Ball, for that extra bass dimension.
You can find more information about these exciting products on our website www.podspeakers.dk
MicroPod Bluetooth
Wireless active speaker system
ENGLISH
// 6
ENGLISH / Back panel
1 AUX IN smartphone, tablet, laptop, etc.
2 Output for subwoofer
3 Power connection
4 Binding posts for connecting second
speaker for stereo
5 On/Off/Volumecontrol
// 7
ENGLISH / Connection and operation
1 Connect the two speakers with the included speaker cable, then plug in the power adaptor.
Note! The connecting cable consists of a round and a square cable.
Make sure that the square cable is connected to the black binding post and the
round cable is connected to the red binding post on both speakers.
2 After connecting the speakers and the power adaptor, turn the volume knob to the right to turn the
speakers on.
3 Turn the volume knob to the right to increase the volume and to the left to decrease the volume.
To turn the power off, the volume knob must be turned all the way to the left.
4 The MicroPod Bluetooth have two input options; AUX IN and Bluetooth connection.
You can not use both inputs at the same time. If the MicroPod Bluetooth gets a signal from both
lines, the signal will be mixed. We therefore recommend that only one line input is used.
5 When you turn the MicroPod Bluetooth on, the Bluetooth function will automatically search for
devices to connect to. The Bluetooth is always searching when it is not connected via Bluetooth.
To match the MicroPod Bluetooth and your device, you need to switch the Bluetooth on, on your
device. You will then see MicroPod Bluetooth.
Note! On some devices you will be asked for a password to connect. The password is 0000
6 When a device is connected via the Bluetooth connection you can not connect other devices.
If you want to connect a new device to your MicroPod Bluetooth, you need to disconnect the
Bluetooth on the connected device first.
7 Some devices will automatically reconnect to your device when it is turned on again after it has
been turned off. If you have more devices searching when you turn on your MicroPod Bluetooth it
will choose one of the devices randomly.
ENGLISH / Running-in period
We recommend a running-in period of your new MicroPod Bluetooth speakers of approximately 15-20 hours at normal listening level before you decide
on the final positioning and settings of the speakers. During the running-in period, the drive units will settle in and perform as intended.
ENGLISH
// 8
ENGLISH / Safety instructions
The lightening flash with arrowhead symbol within an equilateral triangle, is intended to
alert the user of the presence of uninsulated “dangerous voltage” within the products enclo-
sure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the speakers.
This symbol means that this unit is double insulated.
An earth connection is not required.
Important safety instructions
Read, follow, heed and keep all instructions and warnings.
• Do not use the speakers near water or moisture. Do not use the speakers near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or
moisture is present.
• Do not block any ventilation openings. To ensure reliable operation of the speakers and protect them
from overheating, place them in a position and location that will not prevent proper ventilation. E.g. do
not place the speakers on a bed, sofa, or similar surface that may block the ventilation openings.
// 9
• Clean only with a dry lint-free soft cloth and do not use any cleaning agents.
• Do not install near any heat sources, such as radiators, heat registers, stoves or other apparatus that
produce heat.
• Only connect power cord to a polarized and safety grounded outlet wired to current electrical codes
and compatible with voltage power and frequency requirements stated on the rear panel of the
speakers.
• Protect the power cord from being walked on, pinched or strained.
• Unplug the speakers during lightning storms or when unused for long periods of time.
• Use proper power sources. Plug the speakers into a proper power source, as described in the operating
instructions or as marked on the product.
• Servicing is required if the speakers have been damaged in any way such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the speakers, the speakers have been
exposed to rain or moisture, do not operate normally, or have been dropped.
• Do not attempt to service the speakers yourself. Opening or removing covers may expose you to
dangerous voltages or other hazards.
If fuse needs to be replaced only use same type and value.
IMPORTANT!
Remember to unplug the power cable from the mains socket before opening the fuse holder.
We recommend this should be done by qualified personnel only.
Only use attachments and accessories specified by Scandyna A/S Denmark,
for safe operation and to avoid injury.
WARNING! To reduce the risk of electric shock or fire, do not expose the speakers to rain or moisture.
Service must be performed by qualified personnel only.
ENGLISH
// 10
ENGLISH / Limited warranty
Dear Customer
This product has been designed and manufactured to the highest quality standards, however if something
goes wrong with this product, Scandyna A/S and the country distributor, warrants free replacement parts
or repair by the official Scandyna distributor.
This limited warranty is valid for the original owner for a period of one year from the date of purchase and
it is not transferable.
What is covered by the limited warranty:
The limited warranty covers all production and material defects of the product, except for the damages
stated below.
What is not covered by the limited warranty:
• Damages caused by packing and transport.
• Defect caused by accidents, misuse, normal wear and tear, mis-maintenance, voltage variation and
overloading.
• Damages caused by incorrect installation or operation.
• Damages caused by modification or repair by a non-authorized service center and use of non-original
spareparts.
• Other damages due to the conditions beyond Scandyna’s control such as fire, rain, stroke of lightning,
war and other force majeure events.
Autres manuels pour MicroPod
3
Table des matières
Langues :
Autres manuels PodSpeakers Système de haut-parleurs
Manuels Système de haut-parleurs populaires d'autres marques
Sondpex
Sondpex Active Speaker System and Digital Music... Manuel utilisateur
JVC
JVC NX-PN7 Manuel utilisateur
Marshall Amplification
Marshall Amplification AR-DM61-BT Manuel utilisateur
Yamaha
Yamaha NX-A01 - Speaker Sys Manuel utilisateur
SE Audiotechnik
SE Audiotechnik I-LINE Manuel utilisateur
Gemini
Gemini WRX-843 Series Manuel utilisateur