Platinum PT-CFLS8621 Manuel utilisateur
PTCFLS8621
86" AIR CUSHION
LIGHT STAND
QUICK SETUP GUIDE
PACKAGE CONTENTS
• Light stand
• Carrying case
• Quick Setup Guide
FEATURES
• Built-in air cushioning prevents
damage to light xtures and injury to
ngers by gently lowering the light
when section locks are not secure.
• Versatile and compact for easy set up
• Four-section light support with
screw knob section locks
• Perfect for studio lights, ash heads,
umbrellas, reectors, and
background supports
• Oers sturdy support in the studio
and is easy to transport to other
locations
Before using your new product, please read these instructions to prevent any damage.
# ITEM
11/4" or 3/8"
mounting
screw
adapter
2Section knob
3Leg position
knob
DESCRIPTION
Use either end of the
adapter to mount a
device, such as a studio
light, ash head, or
umbrella bracket.
The adapter can be used
vertically or horizontally.
(shown horizontally in
image)
Note: Some studio ash
heads or umbrella brackets
slide all the way over this
mount area and fasten in
place with a locking clamp.
• Tighten to lock each
section in place.
• Loosen to extend or
shorten each section.
• Tighten to lock the leg
positions.
• Loosen to position the
legs.
4Loosen each section knob, then extend each
section to the length you want and tighten
the knobs.
5Attach your studio light, ash head, umbrella,
or other device to the mounting screw.
IMPORTANT SAFETY
INSTRUCTIONS
• To prevent damage to your lighting
equipment or injury to you or others, read
the following safety precautions before using
the stand.
• Read and understand all instructions before
using.
• Keep these instructions.
• Close supervision is necessary when any
appliance is used by or near children. Do not
leave the stand unattended while in use.
• Do not place the light stand on an uneven
surface. Your stand may tip over and cause
property damage or personal injury.
• For additional security, add weighted bags to
the base for extra stability.
Note: Do not exceed the 20 lb load capacity of this
light stand. Avoid mounting heavier or unbalanced
loads on the stand to prevent an accidental fall,
bodily injury, or damage to your equipment.
V1 ENGLISH 20-0028
USING YOUR LIGHT STAND
1Loosen the leg position knob.
2Pull outward on the legs and set upright.
3Move the legs to the position you want, then
tighten the leg position knob.
SPECIFICATIONS
• Maximum operating height:
86.6 in. (220 cm)
• Minimum operating height:
29.6 in. (75.2 cm)
• Folded height: 26.6 in. (67.6 cm)
• Net weight: 3.5 Ibs. (1.6 kg)
• Load capacity: 6.6 lbs. (3 kg) - 20 lbs. (9 kg)*
• Main material: Aluminum
*Weight capacity varies with light stand length.
Product must be centered for optimum support.
ONE-YEAR LIMITED WARRANTY
CONTACT PLATINUM
For customer service, call 1-800-499-3964.
PLATINUM is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
Leg position
knob
Leg position
knob
Autres manuels Platinum Équipement d'éclairage
Manuels Équipement d'éclairage populaires d'autres marques
Qazqa
Qazqa Suplux SL 3 Black 103062 Manuel utilisateur
Commercial Electric
Commercial Electric 54568141 Manuel utilisateur
CREE LIGHTING
CREE LIGHTING 304 Series Manuel utilisateur
Goobay
Goobay 49867 Manuel utilisateur
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manuel utilisateur
Alkalite
Alkalite Krypton KT-81 Manuel utilisateur
