Planika Astro 850 Manuel utilisateur

ASTRO

Installation and user’s manual


Table of contents 
IMPORTANT INFORMATIONS........................................................................................................................................3 
APPLIANCE DATA...........................................................................................................................................................3 
EQUIPMENT RECEIVED..................................................................................................................................................4 
PRE- INSTALLATION.......................................................................................................................................................4 
INSTALLATION...............................................................................................................................................................4 
1 Recessed installation with Three Sided view..........................................................................................................4 
2 Recessed installation with Corner view..................................................................................................................5 
3. Recessed installation with Front view...............................................................................................................5 
4. Partly- recessed installation ..............................................................................................................................6 
5. Wall- mounted installation................................................................................................................................6 
6. Installing Wall Switch.............................................................................................................................................7 
7. Installing Side Covers .............................................................................................................................................7 
8. Removing the Glass................................................................................................................................................7 
OPERATION MANUAL........................................................................................................................................8 
1 Hand-held remote .............................................................................................................................................8 
2 Pairing remote...................................................................................................................................................8 
3 Wall switch ........................................................................................................................................................9 
4 Light indicator....................................................................................................................................................9 
5 Manual controls...............................................................................................................................................10 
TROUBLESHOOTING ........................................................................................................................................10 
FAQ ..................................................................................................................................................................11 
CLEANING AND MAINTENANCE ......................................................................................................................11 
 
 
 
 
 

1. IMPORTANT INFORMATIONS

- Read all instructions before installing or using this heater.

- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.

- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 1m from the

front of the heater and keep them away from the sides and rear.

- Extreme caution is necessary when any heater is used by or near children or disabled people and whenever the

heater is left operating and unattended.

- Do not operate any heater after it malfunctions, has been dropped, or damaged in any manner. Disconnect power

at service panel and have heater inspected by an authorized technician or a reputable electrician before using. To

disconnect heater, turn controls to off and turn off power to heater circuit at main disconnect panel.

- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric

shock or fire, or damage the heater.

- To prevent a possible fire, do not block air intakes or exhaust in any manner.

- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable

vapors or liquids are used or stored.

- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause

fire, electric shock or injury to persons.

WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property

damage. Refer to this manual

CAUTION: Do not expose the heater to the elements (such as rain, etc.). For assistance or additional information,

consult a qualified installer.

Do not place clothing or other flammable material on or near firebox. Never place any objects on the fireplace.

Carefully supervise young children when they are in the room with fireplace.

Fireplace becomes very hot when running. Keep children and adults away from hot surfaces to avoid burns or

clothing ignition. Fireplace will remain hot for a time after shutdown. Allow surfaces to cool before touching.

CAUTION: In order to avoid overheating, do not cover the heater.

2. APPLIANCE DATA

Table A

Model

Viewing Area

(WxHxD) [mm]

Firebox Dimensions

(WxHxD) [mm]

Framing Dimensions (opening size)

(WxHxD) [mm]

Astro 850

838 x 477 x 150

840 x 708 x 249

846 x 717 x 262

Astro 1200

1219 x 477 x 150

1221 x 708 x 249

1227 x 717 x 262

Astro 1500

1524 x 477 x 150

1526 x 708 x 249

1532 x 717 x 262

Astro 1800

1829 x 477 x 150

1831 x 708 x 249

1837 x 717 x 262

FIREBOX DIMENSIONS

249mm

FIREBOX DIMENSIONS

708mm

Firebox width varies (see chart below)

VIEWING AREA

477mm

VIEWING AREA

150mm

Viewing width varies (see chart below)

3. EQUIPMENT RECEIVED

4. PRE- INSTALLATION

Select a suitable location that is not susceptible to moisture and is a safe distance from drapes, furniture and high

traffic areas. A qualified electrician should add an electrical outlet suitable for a CEE 7/7 plug on a dedicated flexible

15 amp 220-240 volt circuit per local building codes.

NOTE: Follow all national and local electrical codes.

CAUTION: Wear gloves and safety glasses for protection during installation and maintenance.

5. INSTALLATION

5.1 Recessed installation with Three Sided view

1. Prepare the framed opening according

to the table A- Framing Dimensions

(opening size) on page 3. Provide an

electrical outlet on the back side of the

framed opening, near the top right

corner.

2. Install L- Metal Mounting Brackets in top

and bottom sections of the device to

prepared holes.

3. Install the fire unit in the framed opening

with drywall screws to secure the unit.

4. Mask the exposed fire unit during the

drywall process. Install drywall to the

drywall stops on the perimeter of the

fire box. Decorate as desired.

5. Install the side and front glass pieces.

5.2 Recessed installation with Corner view

1. Follow steps 1 & 2 from the Three Sided installation instructions.

2. Remove the corresponding drywall stops according to your installation (in the example,

the drywall stops on the left end would be removed.)

3. Install the side glass then the corresponding side cover (page 7) according to your

installation (the side glass must be installed before the metal side cover.)

4. Install the fire unit in the framed opening with drywall screws to secure the unit.

5. Mask the exposed fire unit during the

drywall process. Install drywall to the

drywall stops on the perimeter of the

fire box. Decorate as desired.

6. Install the remaining side glass and

front glass.

5.3. Recessed installation with Front view

1. Follow steps 1 & 2 from the 3 sided installation instructions.

2. Remove the drywall stops on both sides of the fire unit.

3. Install the side glass then side covers (page 7) on both sides of the fire

unit (the side glass must be installed before the metal side cover.)

4. Install the fire unit in the framed opening with drywall screws to

secure the unit.

5. Mask the exposed fire unit during the drywall process.

Install drywall to the drywall stops on the perimeter of

the fire box. Decorate as desired.

6. Install the front glass.

5.4. Partly- recessed installation

1. Prepare the framed opening according

to the height and width of the table A -

Framing Dimensions (opening size) on

page 3. Provide an electrical outlet on

the back side of the framed opening,

near the top right corner.

2. Install L- Metal Mounting Brackets in top

and bottom sections of the device to

prepared holes.

3. Install the fire unit in the framed opening

with drywall screws to secure the unit.

4. Firebox must be covered with material of

choice. Mask the exposed fire unit during

this process. Install drywall, tile or material

of your choice to the drywall stops on the

perimeter of the fire box. Decorate as

desired.

5. Install the side and front glass pieces.

5.5. Wall- mounted installation

1. Find the optimal place to mount your

appliance.

2. Hold the Wall Bracket up to the wall and

ensure that it is level.

3. Attached the Wall Bracket to the wall by

using screws in pre-made holes

4. Install the appliance by carefully moving the

device to the wall and gently lower the

device down until it sits on hooks on both

sides.

5. Optionally install L- Metal Mounting

Brackets in top and bottom sections of the

device to prepared holes.

6. Firebox can be covered with material

of choice. Mask the exposed fire unit

during this process. Install drywall,

tile or material of your choice to the

drywall stops on the perimeter of the

fire box. Decorate as desired.

7. Install the side and front glass pieces.

5.6. Installing Wall Switch

1. Locate 2-gang low voltage bracket within 6m of fireplace.

2. Remove glass face (attached with magnets) from metal bracket.

3. Attach the metal bracket to the low voltage bracket with the screws.

4. Insert batteries (2 AAA) and replace the glass face.

5.7. Installing Side Covers

Place the side cover and screw into position with the screws.

5.8. Removing the Glass

1. To remove the glass from the appliance use cross headed screwdriver to

unscrew the top bracket of the appliance, holding the glass in place.

2. Remove the top bracket out ensuring the glass is supported all the time.

3. Gently lift the glass up and out from the appliance

using suction cups and ensuring you have full support

of the glass

6. OPERATION MANUAL

6.1 Hand-held remote

The unit has a main power switch just in front of the glass on the right hand side. A hand-held remote is included.

This will turn the machine on. Upon turning power on,

the machine will return to the settings it had when it was

cycled off.

This will turn the machine off.

This will cycle the heater between high, low and off.

All zones of the fireplace will start the slow fade between

colors.

Pressing the sync button will change all the colors of the

fireplace (Flame, Ember Bed and Downlight) to match

the current color of the flame setting.

Pressing this button will reset all colors (Flame, Ember

Bed and Downlight) to the default orange flame setting.

This is a zone setting. Touching this button will allow you

to change the color and brightness of the flame by using

the RGB wheel and brightness slider.

This is a zone setting that controls the color and

brightness of the ember bed.

This is a zone setting that controls the color and

brightness of the downlight.

6.2 Pairing remote

1. With the fireplace ON press and hold the Power button for about 3 seconds until you hear the buzzer sound

twice and the power indicators begin to flash.

2. Within 5 seconds on the hand held remote or wall touch control press the Power button repeatedly until the

buzzer sounds again and the indicators flash acknowledging that it has paired. You may also hear another

buzzer and the pair is now completed.

• Pairing must be done within 5 seconds or the fireplace will time out of pairing mode.

• To clear any paired remotes from the unit, locate then press and hold the reset button for 3 seconds. You should

hear a buzzer letting you know the codes have been cleared so you can now pair a new remote or wall touch control.

(The reset is located next to the manual controls and can be pressed with a paper clip.)

6.3 Wall switch

This will turn the machine on. Upon turning power on,

the machine will return to the settings it had when it was

cycled off.

This will turn the machine off.

This will cycle the heater between high, low and off.

All zones of the fireplace will start the slow fade between

colors.

This will allow you to use the Plus or Minus icons to set a

time (indicated by the display screen). Times will be ½h,

1h or 3h. Upon reaching this time the machine will

power off.

Pressing this button will reset all colors (Flame, Ember

Bed and Downlight) to the default orange flame setting.

This is a zone setting. Touching this button will allow you

to change the color and brightness of the flame by using

the RGB wheel and brightness slider.

This is a zone setting that controls the color and

brightness of the ember bed.

This is a zone setting that controls the color and

brightness of the downlight.

Pressing the Plus or Minus icons will start the thermostat

setting. Set to the desired temperature and the unit will

automatically confirm within a few seconds.

6.4 Light indicator

Power indicator light for wall switch as well as upper right corner of the main unit

When the switch turns on, this green pilot lamp turns on. It shows the fire is energized.

A blue status light shows that the power is on and the heater is on low.

A red status light shows that the power is on and the heater is on high.

6.5 Manual controls

The unit has manual controls located next to the power switch, just in front of the glass on the top right side.

7. TROUBLESHOOTING

Ce manuel convient aux modèles suivants

Table des matières

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur