Planex CS-W02G Manuel utilisateur
Wireless LAN 802.11g Network Camera
CS-W02G
USER'S MANUAL
Contents
1 Before You Use This Product ..........................................
2 Package Contents ..............................................................
3 Installation ............................................................................
3.1 Hardware installation .........................................................
3.2 Software installation ...........................................................
3.3 Initial Access to the Network Camera ..................................
3.4 How to Use .......................................................................
3.5 Installing plug-in ................................................................
3.6 Primary user’s capability ....................................................
3.7 Administrator’s capability ...................................................
4 Definitions in Configuration ............................................
4.1 System parameters ............................................................
4.2 Security settings ................................................................
4.3 Network settings ................................................................
4.4 Mail & FTP ........................................................................
4.5 DDNS and UPnP settings ..................................................
4.6 Video codec parameters ....................................................
4.7 Motion detection ................................................................
4.8 Application settings ............................................................
4.9 Viewing system log ............................................................
4.10 Viewing system parameters ...............................................
4.11 Factory default ..................................................................
5 Definitions in Configuration ............................................
A. Troubleshooting ..................................................................
B. Frequently asked questions .................................................
C. URL commands of the Network Camera ...............................
D. Technical specifications .......................................................
1
3
5
5
7
10
11
11
13
16
29
30
31
32
36
38
39
41
42
45
45
45
47
47
48
52
60
The use of surveillance devices may be prohibited by law in your
country. The Network Camera is not only a high-performance
web-ready camera but also can be part of a flexible surveillance
system. It is the user’s responsibility to ensure that the operation
of such devices is legal before installing this unit for its intended
use.
It is important to first verify that all contents received are
complete according to the list in the Package Contents chapter.
Take notice of the warnings in Quick installation guide before
the Network Camera is installed, then carefully read and follow
the instructions in the Installation chapter to avoid damages
due to faulty assembly and installation. This also ensures the
product is used properly as intended.
The Network Camera is a network device and its use should be
straightforward for those who have basic network knowledge.
The Troubleshooting chapter in the Appendix provides
remedies to the most common errors in set up and configuration.
You should consult this chapter first if you run into a system
error. The Network Camera is designed for various applications
including video sharing, general security/surveillance, etc. The
How to Use chapter suggests ways to best utilize the Network
Camera and ensure proper operations. For the creative and
professional developers, the URL Commands of The Network
Camera chapter serves to be a helpful reference to customize
existing homepages or integrating with the current web server.
Before You Use This Product
1
Chapter
1
Chapter 1 Before You Use This Product
CS-W02G
CS-W02G
2Chapter 1 Before You Use This Product
CS-W02G
UTP Straight Cable (2M)
AC Adapter
CD-ROM(User's Manual/Utility)
Quick Installation Guide
Warranty Card
Antenna
Camera Mounting Bracket
Package Contents
2
Chapter
3
Chapter 2 Package Contents
CS-W02G
CS-W02G
4Chapter 2 Package Contents
In this manual, User refers to whoever has access to the Network
Camera, and Administrator refers to the person who can configure the
Network Camera and grant user access to the camera.
3.1 Hardware installation
Please verify that your product package contains all the
accessories listed in the foregoing Package Contents.
Depending on the user’s application, an Ethernet cable may be
needed. The Ethernet cable should meet the specs of UTP
Category 5 and not exceed 100 meters in length.
Upon powering up, the device runs through a self-test procedure
and the front LEDs will blink between blue and red a few times. If
self-test passes, the LED will be blue and the Network Camera
will standby for getting IP address. After getting IP Address, the
LED will blink blue every second. If self-test fails the red LED will
blink several times. Refer to Appendix A for troubleshooting.
Installation
3
Chapter
5
Chapter 3 Installation
CS-W02G
Connect the power adapter jack to the Network Camera before
plugging in to the power socket. This will reduce the risk of
accidental electric shock.
The Network Camera will first detect Ethernet. If it does not
connect to Ethernet, the Network Camera will try WLAN. During
the searching and connecting process to the wireless access
point or station, the red LED of the Network Camera will flash
every second. Until the Network Camera connects to the other
wireless device, the red LED will become lighted. Operating in
either network mode, the blue LED will flash every second as
heartbeat to indicate alive.
To install in Ethernet
Make sure the Ethernet is firmly connected to a switch hub.
After attaching the Ethernet cable plug in the power
adapter. If the LED turns out to be steady blue after self-
test, go to next paragraph Software installation. If the
Ethernet is not available, Network Camera will switch to
wireless LAN mode.
To install in wireless LAN
If the Ethernet is not available while power on, the Network
Camera will search for any access point with the SSID
planexuser. Once any access point is found, the LED will
turn blue to wait for installation. If the network environment
cannot meet the default settings, install Network Camera in
Ethernet to proceed with wireless LAN configuration.
CS-W02G
6Chapter 3 Installation
Table des matières
