Planet EVW-9800 Manuel utilisateur

User’s Manual

ENW-9800

PCI-E Dual Port

10 Gigabit Ethernet Adapter

reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or

computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,

manual or otherwise, without the prior written permission of PLANET.

PLANET makes no representations or warranties, either expressed or implied, with respect to the

contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular

purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove

defective following their purchase, the buyer (and not PLANET, its distributor, or its dealer) assumes

the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting

from any defect in the software. Further, PLANET reserves the right to revise this publication and to

make changes from time to time in the contents hereof without obligation to notify any person of such

revision or changes.

All brand and product names mentioned in this manual are trademarks and/or registered trademarks of

their respective holders.

FCC Caution

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the Instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at whose own expense

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference in

which case the user may be required to take adequate measures.

Revision

User’s Manual for PLANET PCI Express 10 Gigabit Ethernet Adapter

Model: ENW-9800

Rev: 1.0 (JUL, 2009)

Part No. EM-ENW9800

Table of Contents

CHAPTER 1

INTRODUCTION ............................................................................................. 1

1.1

ACKAGE

ONTENT

...........................................................................................................................1

1.2

EATURES

........................................................................................................................................1

1.3

ATHERING

OOLS AND

OCUMENTATIONS

..........................................................................................1

CHAPTER 2

HARDWARE INSTALLATION ........................................................................ 2

2.1

LED

DEFINITIONS

..............................................................................................................................2

2.2

ARDWARE

NSTALLATION

..................................................................................................................3

CHAPTER 3

DRIVER INSTALLATION ................................................................................ 4

3.1

NSTALLING

RIVER TO

INDOWS

ERVER

2003/2003R2 ....................................................................4

3.2

NSTALLING

VLAN

UPPORT

RIVER

INDOWS

ERVER

2003/2003R2 ...........................................6

CHAPTER 4

SPECIFICATIONS......................................................................................... 10

Chapter 1 Introduction

Meet the next gerneration interface - PCI Express dual port 10 Gigabit Ethernet can provide

the best solution for one of the major issues of Local Area Networks - communication speed.

Hundred times as fast as the existing 100Base-TX solutions, using the PLANET ENW-9800

to connect your servers and workstations guarantees extremely high throughput and

excellent signal quality.

The ENW-9800 is a PCI Express dual port 10 Gigabit Ethernet adapter designed to address

high-performance system application requirements. With the higher bandwitdh of x8, x4 PCI Express

Bus Architecture, ENW-9800 can provide better performance than the network cards which base on

32/64bit PCI architecture. It is specifically designed to allow throughput at rates up to 2.5Gbps, thus

eliminating the existing 32/64bit PCI network card.

1.1 Package Content

Check that your package contains the following items:

91 x ENW-9800

91 x Quick Installation Guide

91 x CD-ROM Manual / Driver

Please contact the seller if any of the items is missing or damaged.

Be sure to retain your proof of purchase, as it is required to receive warranty

service.

1.2 Features

¾Compliant with PCI Express 1.1 – x8 PCI Express standard

¾Supports IEEE 802.3ae, IEEE 802.3x, IEEE 802.1Q VLAN.

¾Supports dual SFP Slots.

¾Integrated Frame Buffer Memory for Dual TX 32KB and Dual RX 64KB.

¾Supports Jumbo Frame up to 16K

¾IP, TCP and UDP checksum offload

1.3 Gathering Tools and Documentations

To install the adapter, you need the following items:

9A suitable screw driver

9Your operating system documentation

9Your system unit documentation, including any service documentation

Chapter 2 Hardware Installation

2.1 LED definitions

The faceplate of ENW-9800 has three LEDs: 100, 1000 and ACT. The pictures below have showed the

faceplate of ENW-9800. Table 2-1 explains the function and state of the LEDs.

Link / ACT LED

Faceplate of ENW-9800

LED Description

Link Lights to indicate a functional network link through the port.

Act Blinks to indicate data has been sending and receiving via the

port.

Table 2-1 Descriptions of ENW-9800 LEDs

2.2 Hardware Installation

Step 1: Please turn off your PC.

Step 2: Remove any metal decorations from your hands and wrists.

Step 3: Remove the cover from your PC.

Step 4: Locate an empty PCI Express slot and remove the corresponding back plate. Save the

screw for use in Step 6.

Step 5: Carefully insert the adapter into the chosen slot and press firmly with proper push to

ensure it is fully seated in the slot.

Step 6: Secure the adapter with the screw you saved in step 4.

Step 7: Replace the PC cover.

Step 8: Power on the PC and refer to next chapter to install the driver of this adapter.

Chapter 3 Driver Installation

A device driver must be installed before your ENW-9800 can be used with your computer. This chapter

describes how to install the driver for various operating systems. Before you begin the driver installation

process, make sure you have the installation disks for your computer’s operation system nearby.

3.1 Installing Driver to Windows Server 2003/2003R2

The following installation operates under Window2003R2. Procedures will be

similar to Window Server 2003 and Windows XP.

Install ENW-9800 into your PC’s PCI Express slot.

Power on the PC and insert Driver Disk into CD-ROM drive.

Windows 2003R2 will detect ENW-9800 and ask you to install driver. Please select the second

option and click “Next”.

Please select “Include this location in the search” and then click “Browse” to specify

ENW-9800 driver location to install. (Assume "E" is your CD-ROM drive, you can find

ENW-9800 driver in E:\planet_NIC10G\3.23\drivers\W2003). Please click “Next” to continue.

Win2003R2 will show you this dialog box to prompt you the driver is not digitally signed by

Microsoft, please press “Continue Anyway” to continue.

Please click “Finish” to complete the driver installation.

3.2 Installing VLAN Support Driver To Windows Server 2003/2003R2

Open Network Connection properties by Start\Settings\Control Panel\Network Connections

then click “Install” Button.

Select "Protocol" and click "Add” button

In "Select Network Protocol" window click "Have Disk” Button

Press “Browse” to specify ENW-9800 VLAN driver location to install. (Assume "E" is your

CD-ROM drive, you can find ENW-9800 driver in E:\planet_NIC10G\3.23\tools\vlan\W2003).

Please click “OK” to continue.

Table des matières

Autres manuels Planet Carte PCI

Planet

Planet WNL-9501 Manuel utilisateur

Planet

Planet WNL-9310 Manuel utilisateur

Planet

Planet WL-8303 Manuel utilisateur

Planet

Planet WL-8305 Manuel utilisateur

Planet

Planet WNL-9310 Manuel utilisateur

Planet

Planet 802.11g Wireless PCI Adapter WL-8315 Manuel utilisateur

Planet

Planet WNL-9331 Manuel utilisateur

Planet

Planet 802.11g Wireless PCI Adapter WL-8317 Manuel utilisateur

Planet

Planet WL-3553 Manuel utilisateur

Planet

Planet ENW-9503A Manuel utilisateur

Planet

Planet WL-8316 Manuel utilisateur

Planet

Planet ENW-9720P Manuel utilisateur

Planet

Planet WNL-9320 Manuel utilisateur

Planet

Planet 802.11g Wireless PCI Card WL-8310 Manuel utilisateur

Planet

Planet 802.11g Wireless PCI Card WL-8310 Manuel utilisateur

Planet

Planet 802.11n Wireless PCI Adapter WNL-9330 Manuel utilisateur

Planet

Planet WNL-9320 Manuel utilisateur

Planet

Planet WL-8313 Manuel utilisateur

Planet

Planet WL-3501 WireFree Manuel utilisateur

Planet

Planet 802.11n Wireless PCI Express Adapter... Manuel utilisateur

Manuels Carte PCI populaires d'autres marques

ERMA

ERMA SSI 1417 Manuel utilisateur

SIIG

SIIG CyberSerial Dual PCI Instructions de montage

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

I-Bus

I-Bus IBC2602 Manuel utilisateur

Exsys

Exsys EX-60102 Manuel utilisateur

Chelsio Communications

Chelsio Communications T5 Series Manuel utilisateur

Conrad Electronic

Conrad Electronic 97 46 71 Manuel utilisateur

Micro Innovations

Micro Innovations USB650A Manuel utilisateur

KTI Networks

KTI Networks KF-310 Manuel utilisateur

Asus

Asus SpaceLink WL230 Manuel utilisateur

SIIG

SIIG SC2475 Manuel utilisateur

TRENDnet

TRENDnet TEW-703PI Manuel utilisateur

Belkin

Belkin F5D7000F Manuel utilisateur

Pericom

Pericom PI7C7100 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3548 Manuel utilisateur

Digium

Digium TE200 Series Manuel utilisateur

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur

Western Digital

Western Digital FireWire PCI Adapter Manuel utilisateur