Planet ICA-151 Manuel utilisateur

Dual Mode Internet Camera

ICA-151 / ICA-750

Quick Installation Guide

Table of Contents

Chapter 1. Introduction .................................................................................... 3

1.1 Before Installation................................................................................. 3

Chapter 2. ICA-151 – Dual Mode CMOS IP Camera ............................................ 4

2.1 Package Content................................................................................... 4

2.2 Outlook................................................................................................ 4

2.2.1 Front Panel................................................................................. 4

2.2.2 Rear Panel.................................................................................. 5

2.3 Physical Installation ............................................................................. 6

Chapter 3. ICA-750 Dual Mode CCD Box IP Camera ........................................... 7

3.1 Package Content................................................................................... 7

3.2 Outlook................................................................................................ 7

3.2.1 Front Panel................................................................................. 7

3.2.2 Rear Panel.................................................................................. 8

3.3 Physical Installation............................................................................... 8

Chapter 4. Setup Wizard Installation and operation ............................................ 9

Chapter 5. Cam Viewer Plus Installation ...........................................................16

Appendix A: Feature Listing for Cam Viewer Plus...............................................21

Appendix B: Suggest Hardware / System Requirement ......................................22

Ordering Information for Cam Viewer Plus Pro .............................................23

Further Conguration .................................................................................23

Chapter 1. Introduction

Thank you for purchasing the IP surveillance product. It is versatile and high image

solution of the perfect surveillance application. The IP surveillance state-of-art

design is considerable to t in various network environments.

1.1 Before Installation

Before installation, please be sure to read this quick installation guide and user’s

manual (CD) carefully to complete machine installation.

This QIG includes the following chapter:

• Chapter 2. ICA-151 – Dual Mode CMOS IP Camera

• Chapter 3. ICA-750 – Dual Mode CCD Box IP Camera

• Chapter 4. Setup Wizard Installation and operation

• Chapter 5. Cam Viewer Plus Installation

• Appendix A: Feature Listing for Cam Viewer Plus

• Appendix B: Suggest Hardware / System Requirement

Chapter 2. ICA-151 – Dual Mode CMOS IP Camera

2.1 Package Content

ICA-151 x 1

Power Adapter x 1

Camera Stand x 1

CD Disk x 1

Quick Installation Guide x 1

Note

1. If any of the above items are missing, please contact your

dealer immediately.

2. Using a power supply with a different voltage that the one

included with the package will cause damage and void the

warranty.

2.2 Outlook

2.2.1 Front Panel

Microphone

PWR LAN

ACT

LED Status LED Description

PWR

Off No power.

On Power on.

Blinking The Power LED will blink during start up (15 ~ 20 sec).

ACT Off Camera is not capturing video.

Blinking Camera is capturing video.

LAN Off LAN is not connected or camera is not sending/receiving data.

Blinking Data is being transmitted or received via the LAN connection.

2.2.2 Rear Panel

AUDIO OUT PWR LAN

PORT PORT Description

AUDIO OUT An external speaker can be plugged in.

PWR Connect the supplied power adapter.

LAN Connect your Camera to a 10/100Base-TX hub or switch.

Reset

Reset to manufacturer default valued and reboot.

When pressed and held over 10 seconds, the settings of IP

Camera will be set to the default values.

Upon completion, the PWE LED will blink three times.

Bottom Panel of ICA-151

2.3 Physical Installation

1. Connect an Ethernet cable

Connect one end of an Ethernet cable to the LAN port located on the IP camera’s

rear panel and connect the other end to the network device (hub or switch).

2. Attach the external power supply

Attach the provided power adapter to the IP camera’s connector labeled “PWR”

on the rear panel.

3. Check the LEDs

a. The Power LED will turn on briey, and then start blinking during startup.

After startup is completed, the Power LED will remain ON.

b. The LAN LED will be ON.

Chapter 3. ICA-750 Dual Mode CCD Box IP Camera

3.1 Package Content

ICA-750 x 1

Power Adapter x 1

CD Disk x 1

Quick Installation Guide x 1

Allen Wrench x 1

Camera Stand x 1

Note

1. if any of the above items are missing, please contact your dealer

immediately.

2. Using a power supply with a different voltage that the one

included with the package will cause damage and void the

warranty.

3.2 Outlook

3.2.1 Front Panel

DC-drive type

Auto Iris Lens Connector

LAN

Microphone

PWR

LED Status LED Description

PWR

Off No power.

On Power on.

Blinking The Power LED will blink during start up (15 ~ 20 sec).

LAN

Off LAN connection is not detected.

On LAN connection is detected.

Blinking Data is being transmitted or received via the LAN connection.

3.2.2 Rear Panel

Reset LAN (PoE)

PWR AUDIO IN

AUDIO OUT

DI / DO

I/O Info

PORT PORT Description

Reset

Reset to manufacturer default valued and reboot.

When pressed and held over 10 seconds, the settings of IP

Camera will be set to the default values.

Upon completion, the PWE LED will blink three times.

LAN (PoE)

Connect your Camera to a 10/100Base-TX hub or switch. This

interface compliant with IEEE802.3af standard PoE PD (Powered

Device). Either mid-span & end-span PSE can be used.

PWR

Connect to the supplied power adapter 12V DC, 1A. When this

device is obtaining power from PoE already, you don’t have to

attach the power adapter to ICA-750.

DI / DO The terminal block includes 2 input ports and 2 output ports.

AUDIO IN An external microphone can be plugged in. That will disable the

built-in microphone on the front panel.

AUDIO OUT An external speaker can be plugged in.

3.3 Physical Installation

1. Connect an Ethernet cable

Connect one end of an Ethernet cable to the LAN port located on the IP camera’s

rear panel and connect the other end to the network device (hub or switch).

2. Attach the external power supply

Attach the provided power adapter to the IP camera’s connector labeled “PWR”

on the rear panel.

3. Check the LEDs

a. The Power LED will turn on briey, and then start blinking during startup.

After startup is completed, the Power LED will remain ON.

b. The LAN LED will be ON.

Chapter 4. Setup Wizard Installation and operation

This chapter shows how to quick set up your IP surveillance product. The IP

surveillance product is with the default settings. However to help you nd the

networked camera quickly the windows utility-IP Wizard can search the cameras in

the network that shall help you to congure some basic setting before you started

advanced management and monitoring.

Note

In the installation steps below, this guide use ICA-151 as the

example. However, the steps for ICA-750 are similar.

I Initial setup should be performed by using the supplied Windows-based Setup

Wizard as follows:

1. Insert the bundled Product CD into CD-ROM drive to launch the autorun

program.

2. After the web page displayed, click the “Setup Wizard” hyperlink on the menu

to start the conguration process.

Note

If the CD’s menu does not appear, click “Start” on the task bar

and select “Run” to type “X:\Utility\SetupWizard\SetupWizard.

exe”, assume X is your CD-Rom drive.

3. The welcome screen appears. Click on “Setup Camera” button to start the

wizard.

4. After clicking the setup camera button, it will auto search for the IP Cameras on

your network. Click on to continue.

5. The next screen below will list the IP Camera on your network. Select it from

the list on the left side, the current settings table will be displayed on the right

side. Click on to continue.

Autres manuels pour ICA-151

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Planet Caméra IP

Planet

Planet ICA-2200 Manuel utilisateur

Planet

Planet ICA-500 Manuel utilisateur

Planet

Planet ICA-HM125 Manuel utilisateur

Planet

Planet ICA-HM136 Manuel utilisateur

Planet

Planet ICA-2250VT Manuel utilisateur

Planet

Planet ICA-500 Manuel utilisateur

Planet

Planet ICA-120 Manuel utilisateur

Planet

Planet ICA-151 Manuel utilisateur

Planet

Planet RS-21 KLMR Manuel utilisateur

Planet

Planet ICA- 5250 Manuel utilisateur

Planet

Planet ICA-HM830W Manuel utilisateur

Planet

Planet ICA-W8100 Manuel utilisateur

Planet

Planet ICA-HM120 Manuel utilisateur

Planet

Planet ICA-3550V Manuel utilisateur

Planet

Planet ICA-HM220W Manuel utilisateur

Planet

Planet ICA-HM351 Manuel utilisateur

Planet

Planet ICA-108 Manuel utilisateur

Planet

Planet ICA-4500V Manuel utilisateur

Planet

Planet ICA-M5380P Manuel utilisateur

Planet

Planet ICA-151 Manuel utilisateur

Planet

Planet ICA-100 Manuel utilisateur

Planet

Planet ICA-5350V Manuel utilisateur

Planet

Planet ICA-2000 Series Manuel utilisateur

Planet

Planet ICA-350 Manuel utilisateur

Manuels Caméra IP populaires d'autres marques

FLIR

FLIR Exx series Manuel utilisateur

Avigilon

Avigilon H4A-BO1-IR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuel utilisateur

ShareTech

ShareTech AV1 Manuel utilisateur

Ezviz

Ezviz C6C Manuel utilisateur

Melchioni

Melchioni UCAM 2015 Manuel utilisateur

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuel utilisateur

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuel utilisateur

Mitel

Mitel 6800i Series Manuel de service

Vitek

Vitek VTC-IR403-212NP Manuel utilisateur

THOMSON

THOMSON DSC - 323W Manuel utilisateur

AVer

AVer FB2027 Manuel utilisateur

ENFORCER

ENFORCER EV-T5105-N2SQ Manuel utilisateur

Wansview

Wansview NC543 Manuel utilisateur

Eneo

Eneo MCB-64A0003M0A Manuel utilisateur

deView electronics

deView electronics CBDNI36F Manuel utilisateur

Swann

Swann SwannEye Manuel utilisateur

LevelOne

LevelOne IP CamSecure Manuel utilisateur