Planet VPA-100 Manuel utilisateur
– 5 – – 6–
Step 3. Login Prompt
Use web browser (Internet Explorer 8.0 or above) to
connect to 172.16.0.1 (type this address in the address bar
of web browser). You’ll be prompted to input user name
and password: admin and 123, respectively.
Further Information
For further conguration, please refer to the user’s manual,
which can be downloaded from the website.
http://www.planet.com.tw/en/support/download.php?type1=
372&model=48840&type=3
If you have any other question, please contact the dealer
where you purchased this product or you can contact
PLANET directly at the following email address: support_
voip@planet.com.tw
– 1 – – 2 –
– 3 – – 4 –
1. Physical Introduction
The VPA-100 provides LAN2 for network expansion.
SYS
RST 5V DC LAN1
(PoE)
LAN2
InternetPower Adapter
(Optional)
IP Camera
Headset Loud Speaker
Audio
in
Audio
out
12345V3.3V
GNDSPK-SPK+
See below the descriptions of other interfaces
Interface Description
1SYS This LED ashing when power on 40-50
seconds
2RST Press button 10 seconds continuously to
reset default
35V DC Power port
4LAN1 Connects to internet and provides PoE
function
5LAN2 Connects other devices for network
expansion
6Audio in Connects to microphone
7Audio out Connects to speaker
8SPK+ Connects to “+” loud speaker
9SPK- Connects to “-” loud speaker
10 3.3V Power supply for devices, max. 500mA
11 5V Power supply for devices, max. 200mA
12 GND Ground
13 1, 2, 3, 4
Output port, output current 8mA. When
any IP phone is dialed to VPA-100, press
1* to enable/disable port1 output. For
other ports, press 2* for port2, 3* for
port3 and 4* for port4.
2. Hardware Installation
Step 1. Connecting Power via PoE Interface and Network
The VPA-100 can be congured without external power if
connected to an IEEE 802.3af PSE device such as 802.3af
PoE injector/hub or 802.3af PoE switch.
SYS
RST 5V DC LAN1
(PoE)
LAN2
PoE Switch
Note
1. Use of any non-standard PoE injector could
damage the device.
2. Be reminded to power either from AC
adapter (optional) or PoE switch.
Step 2. Computer Network Setup
Set your computer’s IP address to 172.16.0.x, where x is a
number between 2 to 254 (except 1 which is being used for
the camera by default). If you don’t know how to do this,
please ask your network administrator.
SYS
RST 5V DC LAN1
(PoE)
LAN2
PC
– 1 – – 2 –
– 3 – – 4 –
1. Physical Introduction
The VPA-100 provides LAN2 for network expansion.
SYS
RST 5V DC LAN1
(PoE)
LAN2
InternetPower Adapter
(Optional)
IP Camera
Headset Loud Speaker
Audio
in
Audio
out
12345V3.3V
GNDSPK-SPK+
See below the descriptions of other interfaces
Interface Description
1SYS This LED ashing when power on 40-50
seconds
2RST Press button 10 seconds continuously to
reset default
35V DC Power port
4LAN1 Connects to internet and provides PoE
function
5LAN2 Connects other devices for network
expansion
6Audio in Connects to microphone
7Audio out Connects to speaker
8SPK+ Connects to “+” loud speaker
9SPK- Connects to “-” loud speaker
10 3.3V Power supply for devices, max. 500mA
11 5V Power supply for devices, max. 200mA
12 GND Ground
13 1, 2, 3, 4
Output port, output current 8mA. When
any IP phone is dialed to VPA-100, press
1* to enable/disable port1 output. For
other ports, press 2* for port2, 3* for
port3 and 4* for port4.
2. Hardware Installation
Step 1. Connecting Power via PoE Interface and Network
The VPA-100 can be congured without external power if
connected to an IEEE 802.3af PSE device such as 802.3af
PoE injector/hub or 802.3af PoE switch.
SYS
RST 5V DC LAN1
(PoE)
LAN2
PoE Switch
Note
1. Use of any non-standard PoE injector could
damage the device.
2. Be reminded to power either from AC
adapter (optional) or PoE switch.
Step 2. Computer Network Setup
Set your computer’s IP address to 172.16.0.x, where x is a
number between 2 to 254 (except 1 which is being used for
the camera by default). If you don’t know how to do this,
please ask your network administrator.
SYS
RST 5V DC LAN1
(PoE)
LAN2
PC
– 1 – – 2 –
– 3 – – 4 –
1. Physical Introduction
The VPA-100 provides LAN2 for network expansion.
SYS
RST 5V DC LAN1
(PoE)
LAN2
InternetPower Adapter
(Optional)
IP Camera
Headset Loud Speaker
Audio
in
Audio
out
12345V3.3V
GNDSPK-SPK+
See below the descriptions of other interfaces
Interface Description
1SYS This LED ashing when power on 40-50
seconds
2RST Press button 10 seconds continuously to
reset default
35V DC Power port
4LAN1 Connects to internet and provides PoE
function
5LAN2 Connects other devices for network
expansion
6Audio in Connects to microphone
7Audio out Connects to speaker
8SPK+ Connects to “+” loud speaker
9SPK- Connects to “-” loud speaker
10 3.3V Power supply for devices, max. 500mA
11 5V Power supply for devices, max. 200mA
12 GND Ground
13 1, 2, 3, 4
Output port, output current 8mA. When
any IP phone is dialed to VPA-100, press
1* to enable/disable port1 output. For
other ports, press 2* for port2, 3* for
port3 and 4* for port4.
2. Hardware Installation
Step 1. Connecting Power via PoE Interface and Network
The VPA-100 can be congured without external power if
connected to an IEEE 802.3af PSE device such as 802.3af
PoE injector/hub or 802.3af PoE switch.
SYS
RST 5V DC LAN1
(PoE)
LAN2
PoE Switch
Note
1. Use of any non-standard PoE injector could
damage the device.
2. Be reminded to power either from AC
adapter (optional) or PoE switch.
Step 2. Computer Network Setup
Set your computer’s IP address to 172.16.0.x, where x is a
number between 2 to 254 (except 1 which is being used for
the camera by default). If you don’t know how to do this,
please ask your network administrator.
SYS
RST 5V DC LAN1
(PoE)
LAN2
PC
– 1 – – 2 –
– 3 – – 4 –
1. Physical Introduction
The VPA-100 provides LAN2 for network expansion.
SYS
RST 5V DC LAN1
(PoE)
LAN2
InternetPower Adapter
(Optional)
IP Camera
Headset Loud Speaker
Audio
in
Audio
out
12345V3.3V
GNDSPK-SPK+
See below the descriptions of other interfaces
Interface Description
1SYS This LED ashing when power on 40-50
seconds
2RST Press button 10 seconds continuously to
reset default
35V DC Power port
4LAN1 Connects to internet and provides PoE
function
5LAN2 Connects other devices for network
expansion
6Audio in Connects to microphone
7Audio out Connects to speaker
8SPK+ Connects to “+” loud speaker
9SPK- Connects to “-” loud speaker
10 3.3V Power supply for devices, max. 500mA
11 5V Power supply for devices, max. 200mA
12 GND Ground
13 1, 2, 3, 4
Output port, output current 8mA. When
any IP phone is dialed to VPA-100, press
1* to enable/disable port1 output. For
other ports, press 2* for port2, 3* for
port3 and 4* for port4.
2. Hardware Installation
Step 1. Connecting Power via PoE Interface and Network
The VPA-100 can be congured without external power if
connected to an IEEE 802.3af PSE device such as 802.3af
PoE injector/hub or 802.3af PoE switch.
SYS
RST 5V DC LAN1
(PoE)
LAN2
PoE Switch
Note
1. Use of any non-standard PoE injector could
damage the device.
2. Be reminded to power either from AC
adapter (optional) or PoE switch.
Step 2. Computer Network Setup
Set your computer’s IP address to 172.16.0.x, where x is a
number between 2 to 254 (except 1 which is being used for
the camera by default). If you don’t know how to do this,
please ask your network administrator.
SYS
RST 5V DC LAN1
(PoE)
LAN2
PC
– 5 – – 6–
Step 3. Login Prompt
Use web browser (Internet Explorer 8.0 or above) to
connect to 172.16.0.1 (type this address in the address bar
of web browser). You’ll be prompted to input user name
and password: admin and 123, respectively.
Further Information
For further conguration, please refer to the user’s manual,
which can be downloaded from the website.
http://www.planet.com.tw/en/support/download.php?type1=
372&model=48840&type=3
If you have any other question, please contact the dealer
where you purchased this product or you can contact
PLANET directly at the following email address: support_
voip@planet.com.tw
– 5 – – 6–
Step 3. Login Prompt
Use web browser (Internet Explorer 8.0 or above) to
connect to 172.16.0.1 (type this address in the address bar
of web browser). You’ll be prompted to input user name
and password: admin and 123, respectively.
Further Information
For further conguration, please refer to the user’s manual,
which can be downloaded from the website.
http://www.planet.com.tw/en/support/download.php?type1=
372&model=48840&type=3
If you have any other question, please contact the dealer
where you purchased this product or you can contact
PLANET directly at the following email address: support_
– 5 – – 6–
Step 3. Login Prompt
Use web browser (Internet Explorer 8.0 or above) to
connect to 172.16.0.1 (type this address in the address bar
of web browser). You’ll be prompted to input user name
and password: admin and 123, respectively.
Further Information
For further conguration, please refer to the user’s manual,
which can be downloaded from the website.
http://www.planet.com.tw/en/support/download.php?type1=
372&model=48840&type=3
If you have any other question, please contact the dealer
where you purchased this product or you can contact
PLANET directly at the following email address: support_
voip@planet.com.tw
Table des matières
Autres manuels Planet Adaptateur
Planet
Planet Pre-N Wireless USB 2.0 Adapter WNL-U550 Manuel utilisateur
Planet
Planet PL-102U Manuel utilisateur
Planet
Planet UE-9520 Manuel utilisateur
Planet
Planet WNL-U556M Manuel utilisateur
Planet
Planet UE2000 Manuel utilisateur
Planet
Planet WNL-U555HA Manuel utilisateur
Planet
Planet ENW-9504 Manuel utilisateur
Planet
Planet VIP-156 Manuel utilisateur
Planet
Planet WNL-U554 Manuel utilisateur
Planet
Planet VIP-157 Manuel utilisateur
Planet
Planet WL-U356A Manuel utilisateur
Planet
Planet ENW-3502-FC Manuel utilisateur
Planet
Planet Wireless USB Adapter WL-U350 Manuel utilisateur
Planet
Planet WL-3565 Manuel utilisateur
Planet
Planet ENW-9501 PLUS Manuel utilisateur
Planet
Planet ATA-150 Series Manuel de l'opérateur
Planet
Planet WDL-U700 Manuel utilisateur
Planet
Planet VIP-156 Manuel utilisateur
Planet
Planet POE-150 Manuel utilisateur
Planet
Planet ENW-9605 Manuel utilisateur
