PiXORD P-410 Manuel utilisateur
Network P/T Camera
User’s Manual
Version: 1.2
Date: 04/10/2007
1
Content
1. Preface .................................................................................................................................2
2. Product Specifications...........................................................................................................2
3. Product Installation ............................................................................................................... 5
A. Hardware Installation.........................................................................................................5
B. Monitor Setting ..................................................................................................................5
C. IP Assignment ...................................................................................................................6
D. Install ActiveX Control ....................................................................................................... 8
4. Live Video ...........................................................................................................................10
5. Configuration ......................................................................................................................12
A. System ............................................................................................................................12
B. Network ........................................................................................................................... 16
C. A/V Setting ......................................................................................................................18
D. Event List ........................................................................................................................24
6. Network Configuration ........................................................................................................28
7. Factory Default ...................................................................................................................30
Appendix ....................................................................................................................................31
2
1. Preface
PiXORD-410 is a professional CCD network P/T camera, the Pan-Tilt function can be
controlled remotely. It builds in web server. User views real-time video via IE browser.
P-410 supports MPEG-4 and MJPEG video compression which provides smooth and high
quality video. The video can be stored in the SD card, and can be playback remotely using
Microsoft Media Player.
P-410 is an easy-to-use network P/T camera which is designed for security application.
2. Product Specifications
zMPEG-4 / MJPEG compression formats. Supports resolution up to 30/25 fps @ Full
D1 (720x480 / 720x576)
zSelf-Contained HTTP Web Server providing Internet capability for remote access
zRemote Pan/Tilt control
zSupports SD card for local recording
z2-way audio
zOnline firmware upgrade
zReal-time video recording
zCompatible with Microsoft Windows Media Player
3
Hardware
CPU ARM 9, 32 bit RISC
RAM 64MB
ROM 8MB
Image sensor 1/4” CCD
Video Out 1
Audio in/ out 1/ 1
I/O 1 in/ 1 out
Pan angle 2700
Tilt angle 1200
Power Consumption DC 5V, 3A, 8W
Dimensions 105mm (W) x 128.6mm (L) x 105mm (D)
Network
Ethernet 10/ 100 Base-T
Network Protocol HTTP, TCP/ IP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP
System
Video Resolution NTSC:720x480, 352x240, 176x120
PAL: 720x576, 352*288, 176x144
Video adjust Brightness, Contrast, Saturation, Hue
Image snapshot Yes
Full screen monitoring Yes
Pan/ Tilt control Yes, remotely
Preset Point 8
Patrol Yes
Auto Pan Yes
Pan/ Tilt speed control Yes
Compression format MPEG-4, JPEG
Video bitrate adjust CBR, VBR
Motion Detection Yes, 3 different areas
Triggered action Mail, FTP, Save to SD card
Pre/ Post alarm Yes, configurable
Security Password protection
Firmware upgrade HTTP mode, can be upgraded remotely
Simultaneous connection Up to 10
Audio Yes, 2-way
4
SD card management
Recording trigger Motion Detection, IP check, Network break down (Wire
connection)
Video format AVI
Video playback Yes
Delete files Yes
Web browsing requirement
OS Windows 2000, XP, 2003, IE 6 or above
Hardware Suggested Intel-C 2.0G, RAM: 512MB, Graphic card: 64MB
Minimum Intel-C 1.6G, RAM: 256MB, Graphic card: 32MB
5
3. Product Installation
A. Hardware Installation
1. Connect power adapter
2. Connect Ethernet cable
3. Set up the network configurations according to the network environment. For further
explanation, please refer to chapter 6.
B. Monitor Setting
1. Right-Click on the desktop. Select [Properties]
6
2. Change color quality to “Highest (32bit)”.
C. IP Assignment
IP Installer is a utility that provides an easier, more efficient way to configure the IP
address and network settings of the network camera. It even provides a convenient way to
set the network settings for multiple devices simultaneously using the batch setting
function. Moreover, IP Installer can save the network settings for all devices as a backup
and restore them when necessary.
zAlways consult your network administrator before assigning an IP address to your
server in order to avoid using a previously assigned IP address.
zEnsure the network camera is powered on and correctly connected to the network.
zMAC Address: Each network camera has a unique Ethernet address (MAC address)
shown on the sticker of the camera.
zOne final note, although the IP Installer is able to find and configure any network
camera on the LAN except those that are behind a router, it is a good idea to set the
host PC to the same subnet. In order to connect to the Web-based user interface of
the network camera, the host PC must be in the same subnet. For more information
about subnets, please consult your network administrator.
1. Use the software, “IP Installer” to assign the IP address of P405M. The software is
in the attached software CD.
7
2. Click “IP Installer” from the CD menu to start the installation.
3. Once IP Installer has been successfully installed on the computer,
double click the IP Installer icon on the desktop, or select it from Start
> Programs > PiXORD Corporation > IP Installer > IP Installer.
4. The IP Installer window is displayed below. Click the menu bar Tool > Search
Network Device to search the network camera in the LAN.
5. From the list, select the device with the MAC Address that corresponds to the
device that is to be configured.
6. Double click the item to open the Property Page dialog box for the selected device
or click the menu bar View > Property.
7. After filling in the properties, click
[Synchronize] button to
complete the configuration
settings and save in the network
camera and PC immediately. If
click [OK] button, the
configuration is only be saved in
the PC.
8
8. To access the Web-based UI of the selected unit, run the View > Open Web on the
menu bar.
9. If the device has been configured correctly, the default Web browser will open to the
home page of the selected device.
D. Install ActiveX Control
For the first time to view the camera video via IE, it will ask you to install the ActiveX
component.
If the installation failed, please check the security setting for the IE browser.
1. IE ÆTools ÆInternet Options… ÆSecurity Tab ÆCustom Level… Æ
Security Settings ÆDownload unsigned ActiveX controlsÆSelect “Enable” or
“Prompt”.
2. IE ÆTools ÆInternet Options… ÆSecurity Tab ÆCustom Level…
ÆInitialize and script ActiveX controls not marked as safe ÆSelect “Enable”
or “Prompt”.
9
1 2
3 4
5
When popup the following dialogue box, click [Yes].
Table des matières
Autres manuels PiXORD Caméra IP
