Pittasoft Pitta 310 Manuel utilisateur
Network IP Camera
Pitta 310
user manual
FCC notice to users and product statements
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions;
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum 20 cm between the
radiator and your body. This transmitter must not be collocated or operation in conjunction with
any other antenna or transmitter unless authorized to do so by the FCC.
Contents
Chapter 1. Getting Ready
Before Using This User Manual................................2
Pitta 310 Overview ...................................................3
Checking the Pitta 310 Package Content.................4
Checking the main body of the Pitta 310..................5
Installing the Pitta 310 ..............................................6
Connecting Pitta 310 ................................................7
Installing the Software ..............................................9
Chapter 2. Pitta IP Utility and Pitta Web View
Pitta IP Utility guide.................................................11
changing IP address...............................................12
Pitta WebView Log-in .............................................14
Pitta WebView Live View Page...............................15
Pitta WebView-Setup Menu....................................17
Chapter 3. Appendix
DDNS & Router Port Forwarding............................26
Troubleshooting ......................................................27
6SHFL¿FDWLRQ ...........................................................28
Dimension...............................................................30
2PITTASOFT
Getting Ready
Before Using This User Manual
Thanks for purchasing our Pitta 310 IP Network Camera. This is a user manual for
H.264 IP Network Camera and the product mentioned here designates the H.264 IP
Network Camera. Please go through the manual before installation and use of the camera.
This manual along with the software and hardware explained here is protected by
copyright law
.
xRead through all printed documentation and ensure that your system is compatible for
your product.
xPittasoft will continue to add new functions and enhancements and apply new
WHFKQRORJLHVWRWKLVSURGXFW$Q\LQIRUPDWLRQDQGVSHFL¿FDWLRQVFRQWDLQHGLQWKLVPDQXDO
can be changed without prior notice to users.
x7KHVFUHHQVKRWVDQG¿JXUHVSUHVHQWHGLQWKLVPDQXDOPD\GLIIHUIURPWKHDFWXDO
appearances of the product.
❚Conventions
Icon Name Meaning
]
Caution Indicates that the accompanying function may not operate or be
disabled.
✎
Note Indicates a tip or supplementary description to help you operate the
accompanying function.
3
PITTASOFT
Getting Ready
Pitta 310 Overview
The Pitta 310 series are high-tech IP Network Cameras that use H.264 codec technology to
achieve high compression rates and clear picture quality by allowing for high frame rates to
be transmitted through the network. By using the network, remote connection, monitoring,
and control are possible from any location for simple use. The Pitta 310 series IP Network
Camera guarantees performance and safety while offering various solutions through internet
integration.
❚Specifications
High quality H.264 video
+HQDEOHVH[FHOOHQWLPDJHTXDOLW\DWVLJQL¿FDQWO\UHGXFHGQHWZRUNEDQGZLGWKDQG
storage.
Support WDR (Wide Dynamic Range)
Built-in progressive CMOS image sensor and support better image in backlight
environment than normal sensor. (Pitta 310R/310WR supports only)
Motion Detection
Intelligent Motion Detection analyzes for any motion in the scene. The reliable
functionality is built into the camera and client software. Using the client software, user
can set up motion detection to trigger video recording and e-mail alerts. Particular area
in the scene could be included or excluded for the motion detection.
Auto correction of lens distortion
Pitta 310 series client software automatically correct distorted images and can deliver
near perfect images.
Compact size & ultra-light weight
Pitta 310 series are compact design and require minimum space for the installation and
UHGXFHGZHLJKWDOORZVÀH[LEOHPRXQWLQJ
Supports WiFi
Wireless LAN(WiFi) provides easy installation without wired network. (Pitta
310W/310WR supports only)
Supports Audio
Built-in microphone provides recording the surrounding sounds.
4PITTASOFT
Getting Ready
Checking the Pitta 310 Package Content
Check the product and the accompanied accessories contained in the product package.
xIf there is any problem with the accessories, contact your local product distributor.
xThe accompanied accessories can be changed without prior notice.
Pitta 310
Stand
AC adaptor Antenna (Pitta 310W/310WR)
User manual Installation CD (Pitta View, IP Utility)
zGGO]lhP
shuGj
5
PITTASOFT
Getting Ready
Checking the main body of the Pitta 310
Check the main body of the Pitta 310.
✎Description is based on Pitta 310W / 310WR.
✎The figures presented may differ from the actual appearances of the product.
1Front LED Red: Booting Orange: Starting
Green: Operating Red blinking: Firmware upgrading
2AUDIO IN/OUT
IN: Audio input port. You can connect a microphone.
(Check the sound with a PC)
OUT: Audio output port. You can connect a speaker. (This feature is not
LPSOHPHQWHG,WZLOOEHH[SHFWHGWRDGGWKLVIHDWXUHDIWHU¿UPZDUH
upgrade.)
3WIRELESS ON/
OFF
Wireless ON/OFF switch. Make sure that the switch is ON if wireless
needs.
4ANTENNA Wireless port. Connect the antenna for wireless installation.
5LAN Connect the 10/100 Mbps Ethernet cable. Make sure that use RJ-45
connector. Supports PoE (IEEE 802.3af)
6RESET Press the reset button for 3 seconds then all the settings will be changed
to initial settings.
7DC IN DC 5V / 1.0A power terminal.
8NETWORK LED LED is blinking when network is connected.
9POWER LED LED is blinking when power is on.
0Built-in microphone Built-in microphone location.
1 2 3
567
8 9 0
4
6PITTASOFT
Getting Ready
1
Connect the camera to the stand.
✎Connect the antenna to the camera for Pitta 310W
/ 310WR.
2
Place a camera stand at the intended place.
xMake sure that the LAN cable and power
PXVWEH¿JXUHGDWWKHLQWHQGHGSODFH
3
Connect the LAN cable and AC adaptor.
4
Adjust the camera angle.
Installing the Pitta 310
7
PITTASOFT
Getting Ready
❚For wired camera
1
Connect the LAN cable to the [LAN] port.
✎Use a cross cable for a direct connection between
the PC and the camera only. Use direct LAN
cable for using a router or switch hub.
2
Connect the AC adaptor to the [DC] terminal.
✎Use the provided AC adaptor.
3
Make sure that POWER LED and NETWORK
LED is on.
Connecting Pitta 310
- AUDIO - WIRELESS
IN
DC IN LAN
RESET ANTENNA
OUT ON OFF
8PITTASOFT
Getting Ready
Connecting Pitta 310
❚For wireless camera
To connect the wireless camera, IP setting and wireless setting must be set before using.
Once set up is done, disconnect the LAN cable and connect the wireless camera.
1
Connect the camera with the LAN cable.
(T page 7)
2
Set IP address. (T pages 12~13)
3
6HWZLUHOHVVFRQ¿JXUDWLRQLQ3LWWD:HE9LHZ
(T page 19)
4
Disconnect the LAN cable.
5
Connect the antenna.
6
Turn on the WIRELESS switch.
✎Make sure that NETWORK LED is blinking after
about 1 minute.
7
Disconnect and reconnect the AC adaptor. The
camera will reboot.
8
Check the IP address with the Pitta IP Utility.
✎If the connection is change to wireless, IP address may change and the router may need to
restart.
Table des matières
Autres manuels Pittasoft Caméra de sécurité
