Pioneer PRV-LX1 Manuel technique

Thank you for purchasing the Pioneer PRV-LX1. As indicated,

Pioneer is providing a System Update that modifies the

recorder’s Firmware and the operating system (O/S). This

document is a description of added or enhanced features

provided with each update.

PRV-LX1 System Update

Firmware Version 3.07 and O/S Version 1.04

Description of Additions and Changes

Version 3.07/1.04 contains all earlier version changes plus

the following:

♦

Drive Error Correction

Prevents a write error occurring during an extended Pause

of up to 60 minutes when recording directly to a DVD disc or

when recording to HDD and disc

♦ Incremental Writing Improvement

Protects against later titles being corrupted after a disc error

occurs on a recorded title

♦ DV Time Code Correction

Corrects an issue with EDL DV time code to recognize 0 to

24 hours

♦ Title Editing / Trimming Improvement

Corrects loss of audio synchronization that intermittently

occurred when trimming a clip

- 2 -

♦

External RS-422A Control Modification

Sets Shuttle 0 (zero) command to pause during recording

♦ Custom Menu Enhancement

Enables the font color selection option for custom menus

when using the free Pioneer tool, DVD Menu Maker

Previous System Update Description for Version 3.01/1.04

♦ PAL Support

- PAL/NTSC (TV System) Switching Function

- PAL/NTSC (TV System) for Playback

- PAL/NTSC (TV System) for Recording

- PAL/NTSC (TV System) for Menu

♦ Project Management Modification (GUI)

- NTSC – PAL recorded clips begin with the letter P

- PAL – NTSC recorded clops begin with the letter N

♦ Release of Restricted Playback Function

Built-in DVD playback application from Pioneer

♦ Remote Control Support for NLE

Additional RS-422 and IEE-1394 command support for Non

Linear Editors (NLEs)

♦ Expanded EDL Format

Entries for auto naming Titles/Chapters and the ability to set

encode parameters

♦ EDL Renaming

Support to rename EDL files

♦

nection

♦

ng up the User Settings

♦

Title-Repeat

♦

nu(s)

VOB File Export

Allows VOB file exportation through the network con

Backup Capability for User Setting to USB HDD

Add the capability of backi

Title Repeat Command

Adds a DVD Menu post command option of

Route Menu Capability (Title > Chapter)

Allows two layer menus, Title Menu(s) with Chapter Me

- 3 -

♦

ry Clip

♦

nus

♦

d/Scan Reverse using a wheel mouse

♦

independent clips

♦

hen left in Pause for one hour or if the

♦

nable disc finalization when the Eject button is pressed

DVD Disc Creation With Introduction and Idle Clip

Force a disc to automatically play an Introducto

Improvement of the Default Menu Handling

Save and Load options added for improved Default Me

Improvement of Title (Clip) Name Editing

Project command added to rename multiple clips at on

Mouse Wheel Operation and SCAN Speed of RCU

Scan Forwar

Divide Clip

Ability to divide a single clip into two

Auto-Stop Feature for Recording

Unit stops recording w

HDD (or DVD) is full

Eject With Finalization

Previous System Update Description for Version 2.60/1.03

Version 2.60/1

e .03 contains all earlier version changes plus

♦

el audio.

♦

d by a PRV-LX1

♦

finalization time for DVD discs containing chapter

enus.

following:

Lip Sync

A 2-frame lip sync delay is reduced to less than a frame

when recording/encoding Dolby Digital 2-chann

Playback Bug on DVDs with 18/19 Titles

DVD-Video discs of 18 or 19 titles create

play correctly.

Chapter Menu Process

Optimization of the Chapter Menu authoring process has

improved

- 4 -

Previous System Update Description for Version 2.51/1.03

Version 2.51/1.03 contains Version 2.04/1.03 changes

plus the following:

♦

Copy Protection Error

The PRV-LX1 would some times interpret video white noise

on a source tape as copy protection data. It would stop

recording and display a copy protection error message.

After this update, the unit no longer confuses white noise

with copy protection data, eliminating the error.

♦ Multi-border disc modification

Support added for playing back multi-border discs

Previous System Update Description for Version 2.04/1.03

♦ Enable Eject of Non-Finalized DVD-R or DVD-RW Disc

DVD-R/RW disc(s) recorded on the PRV-LX1 can be

ejected without having to finalize the disc. Video/audio

material can be added to a non-finalized DVD-R/RW disc as

long as that disc has been recorded with the 2.04/1.03

version of the LX1. These discs can be moved between

LX1 machines with system software version 2.04/1.03 or

higher. Finalization can occur on any PRV-LX1 recorder

containing the 2.04/1.03 version.

Note: Non-finalized DVD-R/RW discs reorded by the

PRV-LX1 can only be played in an LX1 recorder.

♦ Enable Additional Recording to Non-Finalized DVD-

R/RW Disc

PRV-LX1 (ver 2.04/1.03) can record additional titles and

append existing content to a non-finalized DVD-R/RW disc.

Note: DVD disc must be finalized in order to play in any

other DVD player device other than an LX1 recorder

(ver 2.04/1.03).

- 5 -

♦

Play Non-Finalized DVD-R/RW Disc

PRV-LX1 recorders with system version 2.04/1.03 or higher

can play non-finalized DVD-R/RW discs that have been

recorded by the LX1.

♦ Unfinalize DVD-RW disc

Note: “Unfinalized” does not equal “Non-Finalized.” Unfinalize

is the action which removes finalization data from a DVD-RW

(rewritable) disc and prepares it for additional recording.

Enable the function to unfinalize a DVD-RW disc recorded

by an LX1 with system software 2.04/1.03 or higher.

Note 1: DVD menu settings are lost and default menu setting

is applied since disc menu info is not maintained once disc is

finalized

Note 2: DVD-RW finalized by a previous LX1 version cannot

be unfinalized

Note 3: Blank DVD-RW disc always formats automatically after

recording starts.

Note 4: The unfinalization process is not possible if both DVD1

& DVD2 target drives are selected because LX1 cannot

accurately determine if two unfinalized discs are exactly the

same.

♦ Improvements to Trimming Video

Video clips that are recorded to the internal HDD and are

greater than 4.7GB can be trimmed by the user to any size.

Previously, video clips recorded to the HDD had to be

trimmed to clips size 4.7GB or less (to fit on a DVD). Now

the resulting trimmed clip size is dependent on the

remaining capacity of the internal HDD. If there is equal to

or greater capacity on the HDD, the new clip can be any

size.

When the new clip is made, the name of the clip is the old

name preceded by an asterisk (*). The user can change the

name of the new clip in the GUI by selecting:

Edit->Title->Info/Rename.

- 6 -

ed to a maximum file size of

ained and is

♦

ll now support some DV

cam

the i r all DV

e User

♦ Image Files

files are stored in the LX1 HDD Library Image

P through the LX1 ethernet

♦

ojects

1 HDD from (1) finalized or non-finalized DVD-

R/R

proj

♦

insertion. The insertion points can be at 3

♦

erly formatted menu

Note: If the HDD has 0GB capacity remaining, the

source clip must be trimm

4.7GB and the source clip will not be ret

automatically overwritten.

AutoCapture Function Control DV cameras

PRV-LX1 (ver 2.04/1.03) wi

eras as the source for AutoCapture by the LX1 using

nternal EDL feature.

Note: Pioneer cannot guarantee support fo

cameras, especially consumer level cameras Th

should test this feature with their DV camera.

Create, Save and Copy Multiple Disc

Support is enabled to create, save and copy multiple DVD

disc images to the LX1 internal HDD.

Note: Image

Folder and are accessible via FT

connection.

Copy Clip or Title (VTS VOB)

Enable ability to copy clip or title (VTS VOB) data to pr

on the LX

W disc or (2) from the current project to the same

ect.

Note: Video clip on DVD or HDD must be content

originally recorded with the PRV- LX1.

Additional Time Intervals (15, 30, 60 minutes) for Auto

Chapter insertion

The user can now select from additional time intervals for

auto-chapter

minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes,

60 minutes.

Import All Menu Background Graphics and EDL Files

User can choose to import all prop

background graphic (.jpg or .bmp) files or EDL (.edl) files

from disc or from import directory.

- 7 -

♦ n

listed below are only applicable to

and 2X, 24X,

- Slow-Reverse and Step-Reverse are enabled

♦ er Interface (GUI) Improvement

mation to the user. Additional

new features have

♦

ect are applied

he default menu

proj

♦ Use t or graphic is currently selected

and in use for the menu, it cannot be deleted and is not

the file in question.

Improvements and Enhancements to Playback Functio

Playback improvements

video content recorded by the PRV-LX1 to DVD media or to

e internal HDD and played from the disc, the HDD or in

sc Emulation Mode.

- Frame accurate Timecode searches (CUE) can be

acheived via remote control or an external RS-422A or

IEEE-1394 comm

- Playback scan speed can be changed (to 6X, 1

48X, 96X or 192X) by pushing the SCAN button once

every 5 seconds

- Chapter Repeat can be executed during the last four

seconds of a chapter

♦ On Screen Display (OSD)

Minor enhancements to the On Screen Display operation

have been added.

Graphical Us

The GUI provides greater infor

button selections are available where

been added.

Default Menu Application

(changed from previous versions)

Default menu parameters for a DVD proj

when the disc is loaded in the tray. T

parameters are applied to a HDD project when a new

ect is created on the HDD.

r Management for Menu Files

Note: When a layou

displayed in the Delete section of the GUI. The user

must select another layout or graphic in order to delet

- 8 -

- kground graphics in HDD

- which

data is deleted. The Library

nd graphics.

♦

the

ary files, Menu Background files

an D,

fo button on the front panel.

he main Function menu.

♦

a non-

he disc can be treated as a

♦

User can choose to delete factory installed LX1 menu

button layouts and menu bac

menu library. User can choose to delete imported custom

menu background graphics.

User can choose to intialize HDD menu Library, in

case all imported menu

returns to the factory installed button layouts and

backgrou

External USB 2.0 HDD Support for Backup, Restore & Delete

Functions

Note: Linux "ext3" file system is used to format external USB 2.0 HDD.

A MS-Windows system cannot recognize this file system.

Support is enabled for Backup and Restore/Delete functions

with external USB 2.0 HDD. Controls are available from

PRV-LX1’s Function Menu. The entire contents of the LX1

HDD can be backed up or restored. These actions plus

Delete can be applied to individual folders containing Disc

Image Files, DVD Menu Libr

d/or EDL files. To format the external USB 2.0 HD

llow the directions below:

1) Press the Function

2) Select Set Up from t

3) Select System.

4) Select HDD Tools.

The USB 2.0 HDD must be formatted before Backup,

Restore and Delete functions can be used.

Optimize the UPS shutdown process during recording

If the LX1 receives a RS-232 UPS shut-down command

during recording, the LX1 stops recording, creates

finalized disc, and shuts down. T

non-finalized disc and content can be added to it.

Optimize Power-Off Process

If the PRV-LX1 Standby button is pressed during recording,

the unit stops recording then shuts down. The recorded

- 9 -

ill not be lost and it is possible to add

yback on

♦

and: (1) automatically finalizes

ects a non-finalized disc.

♦

- ord/Preview after Encode Rate Change e

♦

es, the

th the HDD and the error-free drive. The DVD disc can

be t

to it. HDD and DVD

drive(s) are selected as the record targets. This action is not

possible if only recording to the DVD drive(s).

content on the disc w

further content to the disc then finalize it for pla

other DVD devices.

Select Action for RS-422A Eject Command

User can choose to set the PRV-LX1 action when it receive

the EJECT RS-422A comm

the disc before ejecting it or (2) ej

General updates

- Japanese Font Processor Fix

- Playback Sync Enable with DV Out

Immediate Rec

- Thumbnail Images for Chapter Buttons remain the sam

after Clip Trim

Improvement of Disc Error Recovery During Record

If a DVD drive error occurs (possible shock or bad media)

when recording to the HDD and one or both DVD driv

recording continues on the HDD and to the error-free drive.

When the user stops recording an error message is

displayed. However, the recorded video material is retained

on bo

reated as a non-finalized disc and content can be added

Note: This recovery is only possible if the

If you have not done so, please register your Pioneer

PRV-LX1 immediately so that we can notify you about

future updates and upgrades for the PRV-LX1 DVD-Video

Recorder. To register on-line, go to the Pioneer website:

www.pioneerelectronics.com

Click on Product Registration

then on Business Products

If you have any questions, please contact the Sales

Engineering and Product Management department at

Pioneer Electronics Business Solutions Division.

Product Management & Technical Support:

(310) 952-2000

Autres manuels pour PRV-LX1

Autres manuels Pioneer Enregistreur DVD

Pioneer

Pioneer DVR-2810 Manuel utilisateur

Pioneer

Pioneer PRV-9000 Manuel

Pioneer

Pioneer DVR-555HX-S Manuel utilisateur

Pioneer

Pioneer PRV-LX1 Guide de démarrage rapide

Pioneer

Pioneer DVR-320 Manuel utilisateur

Pioneer

Pioneer RCS-404H Manuel utilisateur

Pioneer

Pioneer PRV-LX1 Manuel

Pioneer

Pioneer DVR-440H-S Manuel utilisateur

Pioneer

Pioneer DVR-X162Q Manuel utilisateur

Pioneer

Pioneer PRA-DW11 Manuel utilisateur

Pioneer

Pioneer DVR-610 Manuel utilisateur

Pioneer

Pioneer DVR-530H Instructions générales

Pioneer

Pioneer PRV-LX1 Manuel utilisateur

Pioneer

Pioneer PRV-9200 Manuel utilisateur

Pioneer

Pioneer DVR-3100 Manuel utilisateur

Pioneer

Pioneer PRV-9000 Manuel utilisateur

Pioneer

Pioneer DVR-433H-K Manuel utilisateur

Pioneer

Pioneer BDR-S07XLT Manuel utilisateur

Pioneer

Pioneer PRV-LX1 Manuel utilisateur

Pioneer

Pioneer PRV-LX1 Manuel technique

Pioneer

Pioneer DVR-560HX-K Manuel utilisateur

Pioneer

Pioneer PRV-LX1 Manuel technique

Pioneer

Pioneer PRV-9000 Mode d’emploi

Pioneer

Pioneer PRV-LX1 Manuel utilisateur

Manuels Enregistreur DVD populaires d'autres marques

Sony

Sony RDR-VX525 - DVDr/ VCR Combo Manuel utilisateur

Daewoo

Daewoo DHD-4000D Manuel utilisateur

Medion

Medion MD 40570 Manuel utilisateur

Philips

Philips ShowView DVDR3460H Manuel utilisateur

Sony

Sony RDR-GX355 - Tunerless DVD Recorder Manuel utilisateur

Sony

Sony DVDirect VRD-MC3 Manuel utilisateur

Samsung

Samsung DVD-R130/XAA Manuel utilisateur

FUNAI

FUNAI HD-B2735 Manuel utilisateur

Panasonic

Panasonic DMR-EH54DEG Manuel utilisateur

Sanyo

Sanyo DRW-1000 Manuel utilisateur

Philips

Philips DVDR610/05 Manuel utilisateur

JVC

JVC DR-M10 Manuel utilisateur

Samsung

Samsung SV-DVD40 Manuel utilisateur

Philips

Philips DVDR3355 Manuel utilisateur

FUNAI

FUNAI FDR-90E Manuel utilisateur

LG RC298 Manuel utilisateur

Samsung

Samsung DVD-R130 Manuel utilisateur

Philips

Philips DD-A110GX Manuel utilisateur