Pioneer DEH-2750 Manuel utilisateur

Operation Manual

High power CD player with FM/AM tuner

DEH-2750

DEH-2750B

English -

Português (B)

Español

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate

your model properly. After you have finished reading the instructions, keep this man-

ual in a safe place for future reference.

Before You Start

About this unit 3

Protecting your unit from theft 3

Removing the front panel 3

Attaching the front panel 3

Whats What

Head unit 4

Power ON/OFF

Turning the unit on and selecting a

source 5

Turning the unit off 5

Tuner

Listening to the radio 6

Storing and recalling broadcast

frequencies 6

Tuning in strong signals 7

Storing the strongest broadcast

frequencies 7

Built-in CD Pla er

Playing a D 8

Playing tracks in a random order 8

Repeating play 8

Pausing D playback 8

Audio Adjustments

Introduction of audio adjustments 9

Using balance adjustment 9

Using the equalizer 9

Recalling equalizer curves 9

Adjusting equalizer curves 10

Fine-adjusting equalizer curve 10

Adjusting loudness 10

Front image enhancer (F.I.E.) 11

Adjusting source levels 11

Initial Settings

Adjusting initial settings 12

Setting the clock 12

Turning the clock display on or off 12

Setting the FM tuning step 12

Setting the AM tuning step 13

Additional Information

Understanding built-in D player error

messages 14

D player and care 14

D-R/ D-RW discs 14

Specifications 16

Contents

About this unit

CA TION:

SE OF CONTROL OR ADJ STMENT OR

PERFORMANCE OF PROCED RES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RES LT IN HAZARDO S RADIATION

EXPOS RE.

CA TION:

THE SE OF OPTICAL INSTR MENTS

WITH THIS PROD CT WILL INCREASE

EYE HAZARD.

CAUTION

!Do not allow this unit to come into contact

with liquids. Electrical shock could result.

Also, this unit damage, smoke, and overheat

could result from contact with liquids.

!Keep this manual handy as a reference for op-

erating procedures and precautions.

!Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

!Protect this unit from moisture.

!If the battery is disconnected or discharged,

the preset memory will be erased and must be

reprogrammed.

!If this unit does not operate properly, contact

your dealer or nearest authorized Pioneer Ser-

vice Station.

Protecting your unit from

theft

The front panel can be detached from the

head unit and stored in the protective case

provided to discourage theft.

Important

!Never use force or grip the display and the

buttons too tightly when removing or attach-

ing.

!Avoid subjecting the front panel to excessive

shocks.

!Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press DETACH to release the front

panel.

Press DETACH and the right side of the panel

is released from the head unit.

2 Grab the front panel and remove.

Grab the right side of the front panel and pull

away to the left. The front panel will be de-

tached from the head unit.

3 Put the front panel into the protective

case provided for safe keepin .

Attaching the front panel

1 Place the front panel flat a ainst the

head unit.

2 Press the front panel into the face of

the head unit until it is firmly seated.

Before You Start

En 3

English

Section

Head unit

1CLOCK button

Press to change to the clock display.

2Disc loadin slot

Insert a disc to play.

3EJECT button

Press to eject a D from your built-in D

player.

4AUDIO button

Press to select various sound quality con-

trols.

5PAUSE button

Press to turn pause on or off.

6a/b/c/dbuttons

Press to do manual seek tuning, fast for-

ward, reverse and track search controls.

Also used for controlling functions.

7LOUDNESS button

Press to turn loudness on or off.

8DETACH button

Press to remove the front panel from the

head unit.

9BAND button

Press to select among three FM bands and

one AM band and to cancel the control

mode of functions.

aLOCAL/BSM button

Press to turn local function on or off.

Press and hold to turn BSM function on or

off.

b16 buttons

Press for preset tuning.

cSOURCE button

This unit is turned on by selecting a source.

Press to cycle through all the available

sources.

dVOLUME

Rotate it to increase or decrease the vo-

lume.

eEQ button

Press to select various equalizer curves.

Whats What

Section

Turning the unit on and

selecting a source

You can select a source you want to listen to.

To switch to the built-in D player, load a disc

in the unit (refer to page 8).

%Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

Built-in CD pla erTuner

When you select a source the unit is turned

on.

Notes

!When no disc has been set in the unit, the

source will not switch to the built-in D player.

!When this units blue/white lead is connected

to the vehicles auto-antenna relay control

terminal, the vehicles antenna extends when

this units source is turned on. To retract the

antenna, turn the source off.

Turning the unit off

%Press SOURCE and hold until the unit

turns off.

Power N/ FF

En 5

English

Section

Listening to the radio

1 2 4 53

Important

If you are using this unit in North, entral or

South America, reset the AM tuning step (see

Setting the AM tuning step on page 13).

1Band indicator

Shows which band the radio is tuned to, AM

or FM.

2Frequency indicator

Shows to which frequency the tuner is

tuned.

3LOC indicator

Shows when local seek tuning is on.

4Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

5Preset number indicator

Shows which preset has been selected.

1 Press SOURCE to select the tuner.

2 Use VOLUME to adjust the sound level.

3 Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1,F2,F3 for FM or AM.

4 To perform manual tunin , briefly press

cor d.

5 To perform seek tunin , press and hold

cor dfor about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

#You can cancel seek tuning by briefly pressing

either cor d.

#If you press and hold cor dyou can skip sta-

tions. Seek tuning starts as soon as you release

the button.

Storing and recalling

broadcast frequencies

If you press any of the preset tuning buttons

16you can easily store up to six broadcast

frequencies for later recall with the touch of a

button.

%When you find a frequency that you

want to store in memory press one of pre-

set tunin buttons 16 and hold until the

preset number stops flashin .

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same preset tun-

ing button the radio station frequency is re-

called from memory.

Notes

!Up to 18 FM stations, six for each of the three

FM bands, and six AM stations can be stored

in memory.

!You can also use aand bto recall radio sta-

tion frequencies assigned to preset tuning

buttons 16.

Tuner

Section

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

%Press LOCAL/BSM repeatedly to turn

local seek tunin on or off.

When local seek tuning is on, LOC appears in

the display.

Storing the strongest

broadcast frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 16and

once stored there you can tune in to those fre-

quencies with the touch of a button.

!Storing broadcast frequencies with BSM

may replace broadcast frequencies you

have saved using buttons 16.

%Press LOCAL/BSM and hold until the

BSM turns on.

BSM begins to flash. While BSM is flashing

the six strongest broadcast frequencies will be

stored under preset tuning buttons 16in the

order of their signal strength. When finished,

BSM stops flashing.

#To cancel the storage process, press

LOCAL/BSM.

Tuner

En 7

English

Section

Playing a CD

1 2 3

1RPT indicator

Shows when repeat play is turned on.

2Track number indicator

Shows the track currently playing.

3Play time indicator

Shows the elapsed playing time of the cur-

rent track.

1 Insert a CD into the CD loadin slot.

Playback will automatically start.

#Be sure to turn up the label side of a disc.

#After a D has been inserted, press SOURCE

to select the built-in D player.

#You can eject a D by pressing EJECT.

2 Use VOLUME to adjust the sound level.

3 To perform fast forward or reverse,

press and hold cor d.

4 To skip back or forward to another

track, press cor d.

Pressing dskips to the start of the next track.

Pressing conce skips to the start of the cur-

rent track. Pressing again will skip to the pre-

vious track.

Notes

!The built-in D player plays one, standard, 12-

cm or 8-cm (single) D at a time. Do not use

an adapter when playing 8-cm Ds.

!Do not insert anything other than a D into

the D loading slot.

!If an error message such as ERROR-11 is dis-

played, refer to Understanding built-in CD

player error messages on page 14.

Playing tracks in a random

order

Random play lets you play back tracks on the

D in a random order.

%Press 4 repeatedly to turn random play

on or off.

When random play is on, RDM appears in the

display.

Repeating play

Repeat play lets you hear the same track over

again.

%Press 5 repeatedly to turn repeat play

on or off.

When repeat play is on, RPT appears in the

display.

#If you perform track search or fast forward/re-

verse, repeat play is automatically cancelled.

Pausing CD playback

Pause lets you temporarily stop playback of

the D.

%Press PAUSE repeatedly to turn pause

on or off.

When pause is on, PAUSE appears in the dis-

play.

Built-in CD Player

Section

Introduction of audio

adjustments

1 2 43

1CUSTOM indicator

Shows when custom equalizer curve is cur-

rently selected.

2Audio display

Shows the audio adjustments status.

3FIE indicator

Shows when the front image enhancer is

turned on.

4LOUD indicator

Appears in the display when loudness is

turned on.

%Press AUDIO to display the audio func-

tion names.

Press AUDIO repeatedly to switch between

the following audio functions:

FAD (balance adjustment)EQ (equalizer)

LOUD (loudness)FIE (front image enhan-

cer)SLA (source level adjustment)

#When selecting the FM tuner as the source,

you cannot switch to SLA.

#If you do not operate the audio function within

about 30 seconds, the display is automatically re-

turned to the source display.

#To return to the display of each source, press

BAND.

Using balance adjustment

You can select a fader/balance setting that

provides an ideal listening environment in all

occupied seats.

1 Press AUDIO to select FAD.

#If the balance setting has been previously ad-

justed, BAL will be displayed.

2 Press aor bto adjust front/rear speak-

er balance.

FAD F15 FAD R15 is displayed as the front/

rear speaker balance moves from front to rear.

#FAD 0 is the proper setting when only two

speakers are used.

3 Press cor dto adjust left/ri ht speaker

balance.

BAL L9 BAL R9 is displayed as the left/right

speaker balance moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization

to match car interior acoustic characteristics

as desired.

Recalling equalizer curves

There are six stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Displa Equalizer curve

SPR-BASS Super bass

POWERFUL Powerful

NATURAL Natural

VOCAL Vocal

CUSTOM ustom

EQ FLAT Flat

Audio Adjustments

En 9

English

Section

!CUSTOM is an adjusted equalizer curve

that you create.

!When EQ FLAT is selected no supplement

or correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

EQ FLAT and a set equalizer curve.

%Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

SPR-BASSPOWERFULNATURAL

VOCALCUSTOMEQ FLAT

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

!If you make adjustments when a curve

other than CUSTOM is selected, the newly

adjusted curve will replace the previous

curve. Then a new curve with CUSTOM ap-

pears on the display while selecting the

equalizer curve.

1 Press AUDIO to select EQ.

2 Press cor dto select the equalizer

band to adjust.

EQ-L (low)EQ-M (mid)EQ-H (high)

3 Press aor bto adjust the level of the

equalizer band.

+6 6is displayed as the level is increased

or decreased.

#You can then select another band and adjust

the level.

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q

factor (curve characteristics) of each currently

selected curve band (EQ-L/EQ-M/EQ-H).

Level (dB)

Center frequency

Q=2N Q=2W

Frequency (Hz)

!If you make adjustments when a curve

other than CUSTOM is selected, the newly

adjusted curve will replace the previous

curve. Then a new curve with CUSTOM ap-

pears on the display while selecting the

equalizer curve.

1 Press AUDIO and hold until frequency

and the Q factor (e. ., F- 80 Q 1W) appears

in the display.

2 Press AUDIO to select the desired band

for adjustment.

LowMidHigh

3 Press cor dto select the desired fre-

quency.

Low: 4080100160 (Hz)

Mid: 2005001k2k (Hz)

High: 3k8k10k12k (Hz)

4 Press aor bto select the desired Q fac-

tor.

2N1N1W2W

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

Audio Adjustments

Section

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Pioneer Récepteur de voiture

Pioneer

Pioneer KEH-P5000 Manuel utilisateur

Pioneer

Pioneer XC-P410M Manuel utilisateur

Pioneer

Pioneer MVH-X690BS Manuel utilisateur

Pioneer

Pioneer DEH-P520 Manuel utilisateur

Pioneer

Pioneer KEH-M6250 Manuel utilisateur

Pioneer

Pioneer CRT4804P Manuel utilisateur

Pioneer

Pioneer Super Tuner IIID AVH-P4000DVD Manuel utilisateur

Pioneer

Pioneer DEH-P77MP Manuel utilisateur

Pioneer

Pioneer Super Tuner III D DEH-P6550 Manuel utilisateur

Pioneer

Pioneer DEH-P9000R Manuel utilisateur

Pioneer

Pioneer DEH-X6600DAB Manuel utilisateur

Pioneer

Pioneer DEH-1450UBG Manuel utilisateur

Pioneer

Pioneer DEH-P4600MP Manuel utilisateur

Pioneer

Pioneer KEH-P2800R Manuel utilisateur

Pioneer

Pioneer FH-P9200MP Manuel utilisateur

Pioneer

Pioneer CDX-MG6346ZH Instructions de construction

Pioneer

Pioneer DEH-X1950UB Manuel utilisateur

Pioneer

Pioneer Super Tuner IIID AVH-P5000DVD Manuel utilisateur

Pioneer

Pioneer KEH-1080 Manuel utilisateur

Pioneer

Pioneer DEH-P6850MP Manuel utilisateur

Pioneer

Pioneer AVH-P6300BT Manuel utilisateur

Pioneer

Pioneer DEH-1850 Manuel utilisateur

Pioneer

Pioneer KEH-2700R Manuel utilisateur

Pioneer

Pioneer DEH-6400BT Manuel utilisateur

Manuels Récepteur de voiture populaires d'autres marques

Motorola

Motorola VWA63 Manuel utilisateur

Nextar

Nextar D3201 Manuel utilisateur

Alpine

Alpine CDE-163BT Manuel utilisateur

Axxera

Axxera XDMA7600 Mode d'emploi

XM OnyX Manuel utilisateur

Sound Storm

Sound Storm STM93R Manuel utilisateur

Soundstream

Soundstream VIR-5000 Manuel utilisateur

Avson

Avson MKT Platform Manuel utilisateur

Sony

Sony MEX-1HD - Audio Library System Manuel utilisateur

JVC

JVC KD-AHD69 Manuel utilisateur

Blaupunkt

Blaupunkt SANTIAGO CR 87 Manuel utilisateur

Sony

Sony CDX-4160 - Cd Receiver Manuel utilisateur

XFIRE AUDIO

XFIRE AUDIO BMW42S Manuel utilisateur

VDO

VDO CD 2253 Manuel utilisateur

Volvo

Volvo 13 84 580 Manuel utilisateur

ZENEC

ZENEC ZE-160DVD Manuel utilisateur

Medion

Medion Car Audio Manuel utilisateur

Philips

Philips CEM5000 Manuel utilisateur