PICOTE Midi Roller Manuel d'utilisation et d'entretien
These instrucons are for your personal safety. Always ensure that you
have read and understood these instrucons before using the machinery.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
OPERATION & SAFETY MANUAL
MIDI ROLLER
Picote Soluons Oy Ltd 2www.picoteinstute.com
To watch practical demonstration videos, take a course, or to download an electronic copy of these Instructions, please visit
www.picoteinstitute.com. Please note that videos and courses are not intended as a replacement or alternative to this operating and safety
manual, but only as an additional learning tool.
TOPIC PAGE
Safety Informaon 3
General Machine Safety Informaon 4
Environment, Transport, Storage & Disposal 5
General Informaon 6
Technical Data 7
Chargers and Power Plugs 7
Safety Features 7
CE Declaraon of Conformity 8
Operang Instrucons 9
Before Operaon 9
Starng & Using the Machine 9
Charging the Machine 11
Maintenance Programme & Warranty Periods 12
Maintenance 13
Cleaning the machine 13
Tightening the hinges 13
Tightening the belt 14
Accessories & Spare Parts 15
Troubleshoong Flowchart 16
Warranty Policy & Procedure 17
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
TABLE OF CONTENTS
Picote Soluons Oy Ltd 3www.picoteinstute.com
Personal Protecve Equipment (PPE)
Always use Personal Protecve Equipment including suitable protecve clothing, footwear, plus:
Suitable eye protecon to protect against chemicals from irritang eyes.
Suitable gloves to help prevent any contact with chemicals.
Do not use gloves which can become entangled.
Suitable respirator to prevent any dust or fumes being inhaled or consumed, which
could cause occupaonal asthma or dermas.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
SAFETY INFORMATION
This secon contains important safety informaon. Failure
to comply could result in serious injury.
Safety Symbols
Safety symbols are used throughout this manual to draw aenon to potenal hazards.
Danger risk of serious injury, follow instrucons.
Danger risk of serious injury from rotang parts, follow instrucons.
Danger risk of entanglement.
Do not operate this machine unless long hair has been conned. Do not wear loose clothing,
gloves, jewellery or other items which can become entangled.
Picote Soluons Oy Ltd 4www.picoteinstute.com
1. Always wear eye and chemical resistant gloves.
Other personal protecve equipment, such as dust mask, gloves and overalls should be worn
when necessary. Do not wear loose clothing when using the machine. Always wear appropri-
ate personal protecve equipment. Do not use gloves which can become entangled.
2. Always ensure that the machine is fully turned o before inspecon, maintenance, or installing any accessories to
the machine. Always follow the instrucons in the manufacturer’s manual.
3. Before each use inspect the machine carefully for any potenal break or damage. Change damaged parts
immediately.
4. When in use, it is very important that the machine is stable and on an even surface at all mes.
5. Never leave the machine running unaended.
6. Only operate the foot pedal or OPC as instructed. Never place anything on it in place of a foot.
7. Never touch rotang parts. Do not sit on the machine.
8. Only use this machine with the accessories and spare parts oered by the Picote Soluons. Accessories and spare
parts should only be used in the manner intended and as described by Picote Soluons.
Always read all safety warnings and instrucons. Failure to follow warnings and instrucons may result in electric
shock, re and/or serious injury.
This secon contains important safety informaon. Failure to comply could result in serious injury or death.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
GENERAL MACHINE SAFETY INFORMATION
Picote Soluons Oy Ltd 5www.picoteinstute.com
TRANSPORT
The Midi Roller should be transported laid down or aached to the Picote Wet-Out Staon and secured with
ratchet straps to prevent any sudden movements or accidents caused by hard braking or accident. Always
use a suitable cover to protect the unit from the elements.
STORAGE
The Midi Roller should be stored indoors to protect it from rain and sunlight and somewhere with a constant
ambient
temperature. The best way to store the machine is to use the box that the unit was shipped in.
If the machine has been stored in an environment colder than +10 oC or +50 oF, the machine should be
stood at room temperature for 24 hours before use.
If the machine has been stored for long periods of me (over 2-3 months), it should be checked and tested
according to the maintenance programme before use.
Charge the machine baery to around 80% capacity before storing for long periods.
NEVER leave the unit unaended while it is charging.
DISPOSAL
Midi Roller motor, control box, baery charger and electric wires, can be disposed of in Europe at Waste
Electrical and Electronic Equipment (WEEE) collecon points.
The roller, boom plane and name plate can be recycled in metal waste collecon points. The frame can be
disposed of as plasc waste.
Always follow local waste handling rules and regulaons.
Recycle Li-ion baeries according to local regulaons.
Do not dispose of in re! Do not puncture!
ENVIRONMENTAL
Operaonal Ambient Temperature Range: -20 oC to +60 oC (-4 oF to +140 oF) frost and condensaon free
Charge Ambient Temperature Range: 0 oC to +45 oC (32 oF to +113 oF) frost and condensaon free
Storage Ambient Temperature Range: -20 oC to +45 oC (-4 oF to +113 oF) frost and condensaon free
Maximum Altude: 2000m or 6500 . Derate above 1000m or 3280: 1% / 100m or
328
Maximum Humidity: 95% non-condensing
This secon contains important safety informaon. Failure to comply could result in serious injury or death
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
ENVIRONMENT, TRANSPORT, STORAGE & DISPOSAL
Picote Soluons Oy Ltd 6www.picoteinstute.com
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
GENERAL INFORMATION
Picote Soluons Oy Ltd 7www.picoteinstute.com
Model Size
(mm/inches)
Liner size Rotang
(m/min)
(/min)
Power
Source
Weight
(kg/lbs)
Midi Roller
360x465x284
14”x18”x11”
Up to
DN225/9”
liner
9 m/min
29.5 /min
Electric
Motor
18 / 40
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
TECHNICAL DATA
SAFETY FEATURES
The machine is equipped with an Emergency Switch O Buon. The power supply to the
motor is cut o when the Emergency Switch O Buon is pushed. Always turn o the machine
when performing any maintenance or repairs to the machine.
The machine is operated by foot pedal (Operator Presence Control or ‘OPC’). When the control is not
held down, the machine stops. Never place any kind of object on the pedal in place of a foot (such as a
brick).
CHARGER AND POWER PLUGS
EU Type C
UK Type G Plug
AUS Type I Plug
US Type A plug.
The Machine is supplied with a universal charger with a voltage range of 90V AC ~ 264V AC.
220-230V:
110-125V:
Picote Soluons Oy Ltd 8www.picoteinstute.com
We Picote Soluons Oy Ltd as the responsible manufacturer, declare that the following Picote Soluons Oy Ltd
liner weng machine:
Picote Midi Roller
Model No: Midi Roller 230V, Midi Roller 110V
are of series producon and
Conform to the following EU Direcve:
2006/42/EY
2014/30/EU
2014/35/EU
And is manufactured in accordance with the following standards or standardised documents:
EN 62841-1:2014
The technical documentaon is kept by our authorised representave in Europe who is:
Picote Soluons Oy Ltd, Pienteollisuuse 24
06450 Porvoo, Finland
5th November 2021
8
Katja Lindy-Wilkinson
C.E.O.
Picote Soluons Oy Ltd
Pienteollisuuse 24, 06450 Porvoo, Finland
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
CE DECLARATION OF CONFORMITY
Picote Soluons Oy Ltd 9www.picoteinstute.com
STARTING & USING THE MACHINE
BEFORE OPERATION:
- Before cleaning, maintaining the or aaching the Midi Roller to the Picote Wet-Out Staon
always make sure that the machine is fully turned o and the baery charger unplugged.
- Consult accessory operang manuals (Picote Wet-Out Staon) for detailed
informaon.
While in operaon:
Always lay the machine down horizontally on the oor. Do not sit or stand on the machine.
This secon contains important safety informaon. Failure to comply could result in serious injury
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
OPERATING INSTRUCTIONS
The machine has an operator presence control or ‘OPC’. When the control is not held down, the machine stops. The
machine can also be stopped by pushing the Emergency Stop Buon down or by ipping the power switch.
The rotaonal speed control is located on the control panel. The rotaonal speed can be set at speed
levels from 1 to 10.
1. Prepare the liner.
2. Select the desired liner thickness by pulling the index plunger and turning it.
Picote Soluons Oy Ltd 10 www.picoteinstute.com
12
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
OPERATING INSTRUCTIONS
13
3. Open the upper roller assembly and place the liner between the roller and then close the roller assembly.
4. Turn on the power. See page 6.
5. Release the Emergency O Switch Buon.
6. Select desired speed, direcon.
7. The machine starts when the OPC foot pedal is pressed down. Always keep your hands clear from the
moving parts when operang the machine.
8. Guide the liner further away from the rollers if needed.
9. To do mulple passes, open the roller assembly, move the resin deposit to other side of the roller and
change direcon.
There is an overload protecon on this machine. If the machine is overloaded the motor stops. Release the foot
pedal and press it again to connue working. Avoid overloading the motor. If the machine trips connuously,
consider increasing the liner thickness seng for the rst pass. If the motor overloads with minimum load,
contact your reseller or a Picote Service Centre.
Ce manuel convient aux modèles suivants
9
Table des matières
Autres manuels PICOTE Outils
PICOTE
PICOTE BATTERY MINI CLEANER 8 Manuel d'utilisation et d'entretien
PICOTE
PICOTE DN100 Mode d’emploi
PICOTE
PICOTE Small Grabber Value Manuel d'utilisation et d'entretien
PICOTE
PICOTE Smart Roller Mode d’emploi
PICOTE
PICOTE DN50 Manuel d'utilisation et d'entretien
PICOTE
PICOTE SMART MIXER 2.0 Manuel d'utilisation et d'entretien
