Picomed EFP 2005 Manuel utilisateur

Brokelandsheia, N-4993 Sundebru, Ph +47 3711 9950 Fax +47 3711 9951 E-mail:

[email protected] Org.no 962 211 631 MVA

Environmental control

Documentation for

EFP 2005 doorphone

To be used together with

Picolo, PicoCombi and Erifox

Revision history

When changes are made on the product or in the documentation, this will be given a revision

number. The list below keeps track of these changes.

Date

Name

Description

19.10.05

Bent-Håvard Sollid.

First version with English text.

01.07.06

Bent-Håvard Sollid.

EC Declaration of Conformity updated with new

directives.

Added WEEE icon.

Changed revisionlist to new type.

01.08.08

Bent-Håvard Sollid.

New version of outdoor unit:

- Ch 6.2.1, changed text.

- Ch , 6.2.3, 6.2.4, changed wiring diagram.

01.01.12

Bent-Håvard Sollid.

Added wiring diagram for the new version of PicoCombi,

MK II.

Contents –Documentation EFP 2005

1Introduction......................................................................................................................2

2Getting started, installation.............................................................................................2

3User manual......................................................................................................................2

3.1 Accessories.................................................................................................................3

4Maintenance......................................................................................................................3

4.1 Cleaning .....................................................................................................................3

4.2 Outdoor use ................................................................................................................3

5Troubleshooting................................................................................................................3

5.1 If errors arise ..............................................................................................................4

6Technical information......................................................................................................4

6.1 Fixed mounting ..........................................................................................................4

6.2 Electrical connections ................................................................................................4

6.2.1 Outdoor unit ...........................................................................................................4

6.2.2 Amplifier box.........................................................................................................4

6.2.3 Wiring diagram for Picolo/PicoCombi version I ...................................................6

6.2.4 Wiring diagram for Picolo/PicoCombi version II..................................................7

6.2.5 Wiring diagram for Erifox PABX..........................................................................8

6.3 Default (recycling) .....................................................................................................9

6.4 Technical data ............................................................................................................9

6.5 CE markings...............................................................................................................9

EFP 2005 –loudspeaking doorphone Page 2.

1 Introduction

This documentation is made for Picomeds doorphone EFP 2005, which is a part of Picomeds

environmental system. It consists of 2 units:

Amplifier-box made for indoor placement. It consists of necessary amplification and

voicedirection control.

Outdoor unit consisting of a box with a speaker, a microphone and a push-button.

From the amplifier box there shall be cables to:

Indoor unit (Picolo, PicoCombi or Erifox PABX). Signals and power.

Outdoor unit. Signals.

The equipment does not have any handset, only loudspeaking function. There is an built-in

voice controlling function which controls voicedirection, i.e if the loudspeaker or the

microphone shall be enabled. It is possible to regulate the volume from the outdoor unit, but it

is recommended that the preset value is kept unaltered. EFP 2005 shall be powered with 12

VDC.

2 Getting started, installation

The following parts are included when the product is delivered:

Amplifier box, made to be connected to Picolo/PicoCombi or Erifox. A Picolo/PicoCombi

version can not be connected to an Erifox version or vice verca.

Outdoor unit.

This documentation.

The equipment is developed to be connected to Picomeds loudspeaking indoor units Picolo

and PicoCombi, or an Erifox PABX. Indoor unit is not included in the EFP 2005 shipment.

EFP 2005 made for Picolo/PicoCombi can not be connected to an Erifox version or v.v.

The Erifox version is clearly marked with “Erifox”.

Find a suitable place to mount the outdoor unit. It is recommended to place it where it is

shielded for wind and precipitation. There is space for the users name on the outdoor unit. It

can be marked with a label, waterproof pencil etc.

Find a suitable place to mount the amplifier box. It shall be mounted indoor in a dry place. It

is recommended that it is not more than 4-5 meters cable between the outdoor and the

amplifier box.

Mount cable between amplifier box and outdoor unit, connect as shown in the wiring

diagram.

Mount cable between amplifier box and indoor unit, connect as shown in the wiring diagram.

Erifox version: the telephone line used for doorphone has to be enabled. This is done in

programming mode. Find details in the PABX usermanual.

The doorphone is now ready to be used together with an indoor unit. Test the communication.

The outdoor units volume in the speaker can be adjusted with the potentiometer marked with

“GAIN” on the PCB inside the amplifier box. It is recommended that the preset value is kept

unaltered. A red light indicator (LED) is illuminated when the amplifier box is powered with

12 VDC. Position for the “GAIN” potentiometer and the LED is shown in chapter 6.2.3.

3 User manual

EFP 2005 –loudspeaking doorphone Page 3.

The outdoor unit has a pushbutton which shall be pressed by the visitor. The conversation is

enabled by the user from the indoor unit (Picolo, PicoCombi or telephone via PABX). This

process is described in the indoor units documentation.

3.1 Accessories

Accessories for the EFP 2005 doorphone.

The outdoor units frontfoil can be replaced if the users name shall be changed.

4 Maintenance

EFP 2005 doorphone is developed to work without any need for adjustment etc. There are no

fuses or batteries which has to be changed.

4.1 Cleaning

The equipment should be cleaned when necessary. Wipe the equipment with a slightly damp

cloth or an antistatic cloth. Never use a dry cloth, while this result in risk of static charges. It

shall not be exposed for fluids in any way.

4.2 Outdoor use

Picomeds EFP 2005 doorphone shall have the amplifier box mounted indoor, while the

outdoor unit should be mounted in a shielded place. Attempt to find a place where it not will

be exposed by wind, rain and snow. The reason for this, is that water will be able to get inside

the box and degrade the equipments function.

5 Troubleshooting

If your equipment does not behave as expected, first of all try to solve the problem yourself

using the following table:

Symptom

Possible cause

Recommended action

Completely dead. Light

indicator not illuminated.

No power connected to the

indoor unit (the EFP 2005 is

powered from the indoor

unit).

Ensure that the power supply

is the correct one which was

delivered with the equipment.

Ensure that the power supply

is connected to a functioning

wall outlet.

Ensure that the power supply

is properly connected to the

equipment.

No sound in the speaker in the

outdoor unit.

Cable between amplifier box

and outdoor unit.

Check the “LS” cable.

No sound in the speaker in the

indoor unit.

Cable between amplifier box

and outdoor unit.

Check the “MIC” cable.

No sound neither in the

outdoor unit or in the indoor

unit.

Cable between the amplifier

box and outdoor unit.

Cable between the amplifier

box and indoor unit.

Check wiring: LS, Mic, La

and Lb.

Push-button does not

function.

Cable between the amplifier

box and outdoor unit.

Cable between the amplifier

box and indoor unit.

Check wiring both places.

EFP 2005 –loudspeaking doorphone Page 4.

There are no fuses inside the device which can be replaced.

5.1 If errors arise

If there are errors which are not possible to solve, contact your supplier of the equipment, or

the national distributor. Please make a note beneath of the telephone number to your supplier.

Name

Telephone number, address etc.

Supplier:

National distributor:

6 Technical information

The amplifier box is made by:

Injection moulded box in recyclable ABS-94HB.

Printed circuit board (PCB) screwed into bottom part. The PCB has 3 terminal blocks: one for

connection to outdoor unit, one for connection to indoor unit and one marked with “FREE”.

This is made as a help to the technician if there is a need for joining wires etc. No one of the

connecting points are connected to each other or to components on the PCB.

A red LED illuminates when power is connected.

Potentiometer (“GAIN”). Can be used to regulate speaker volume in outdoor unit.

Outdoor unit:

Front part with microphone, loudspeaker and pushbutton.

Frontfoil glued on front part. Picomeds logo, product name and space made for the users

name on it with a label, waterproof pen etc.

Backside has 6 electrical connections.

Frame for wall mounting.

6.1 Fixed mounting

The amplifier box can be mounted vertically or horizontally as needed.

The outdoor unit is made to placed vertically and shielded for wind, rain and snow.

6.2 Electrical connections

6.2.1 Outdoor unit

On the back there is terminal blocks with connections. Connect as advised on wiring diagram.

Connections are made for maximum 2,5 mm2cable.

Remove 6 mm of the insulation.

6.2.2 Amplifier box

There are 3 terminal blocks in the amplifier box and each of them have 6 connections.

Connections are made for maximum 2,5 mm2cable.

Remove 6 mm of the insulation.

Terminal block at the lower right is for cable to indoor unit.

EFP 2005 –loudspeaking doorphone Page 5.

Terminal block at the lower left is for cable to outdoor unit.

Terminal block at the top left is marked "FREE". This is made as a help to the technician if

there is a need for joining wires etc. No one of the connection points are connected to each

other or to components on the PCB.

Description of the connections:

12V and GND is powersupply to the amplifier. Only use direct current (DC).

La, Lb is sound between indoor unit and amplifier box.

DB is DoorBell, one-pole switch in outdoor unit. Connects GND back to indoor unit.

LS is LoudSpeaker, sound to loudspeaker in outdoor unit. Non-polarized.

Mic+ and Mic- is sound from the outdoor units microphone. Polarized.

EFP 2005 –loudspeaking doorphone Page 6.

6.2.3 Wiring diagram for Picolo/PicoCombi version I

EFP 2005 –loudspeaking doorphone Page 7.

6.2.4 Wiring diagram for Picolo/PicoCombi version II

OBS: this is for PicoCombi MK II –not same diagram as for MKI.

EFP 2005 –loudspeaking doorphone Page 8.

6.2.5 Wiring diagram for Erifox PABX

EFP 2005 –loudspeaking doorphone Page 9.

6.3 Default (recycling)

The following shall be done on Picomeds EFP 2005 when it shall be used by a new user. If

necessary, make a copy of this page, fill inn serial number, version and tick off the points

which are done with signature and date at each point, and file it as your routines requires.

Serial number:

Check the equipment. Is there any physical damages, cracks etc in box or foil?

Check that foil is not damaged, that it is fastened all around the edges and that it not has

loosened from its surface. If it is marked with former users name, remove this marking. If not

possible to remove name, replace foil (can be ordered from supplier).

Clean the device.

Ensure that all components are available, amplifier box and outdoor unit.

Make a function check.

The equipment has to be connected to an indoor unit. It is recommended to do this before the

equipment is disconnected.

Ensure that all functions are working properly: check if “ding-dong” is responding, and that it

is possible to have 2-way communication between out- and in indoor units.

Adjust potentiometer for outdoor loudspeaker volume (“GAIN”) clockwise until end-stop,

thereafter counter clockwise 90º.

Store.

6.4 Technical data

Type

Picomed EFP 2005 doorphone.

Operating

Pushbutton on outdoor unit.

The conversation is activated from indoor unit (not included).

Voice direction is electronically controlled.

Power supply

From indoor unit, 12 VDC.

Current consumption

< 250 mA.

Temperature

Amplifier box: 0˚C to +40C.

Outdoor unit: -20˚C to +40C.

Measurements

Amplifier box: LxWxH: 117 x 94 x 14 mm.

Outdoor unit: LxWxH: 130 x 100 x 45 mm.

Weight

Amplifier box: 160 g.

Outdoor unit: 250 g.

Programmable parameters

Outdoor volume can be adjusted by technician. It is recommended

that the preset value is kept unaltered.

Waste management

Dispose as electronic waste.

Developed and manufactured in

Norway.

6.5 CE markings

Picomeds environmental control systems are developed and manufactured in accordance with

EU directives, national regulations and harmonised standards which are applicable, and

thereafter marked with the CE-mark. The Declaration of Conformity is in English version and

it is set out on the next page.

Table des matières

Autres manuels Picomed Système d'interphone

Picomed

Picomed PicoCombi Manuel de l'opérateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur