PI H-820 Manuel utilisateur
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws
MS207E
H
-820 Hexapod Microrobot
User Manual
Version: 2.3.0
Date: 04.12.2019
This document describes the following product:
H-820.D2
Hexapod microrobot, basis model, 20 mm/s,
20 kg load, Sub-D connector (m), cable set 3 m
The following company names and brands are registered trademarks of Physik Instrumente (PI) GmbH & Co.
KG:
PI®, NanoCube®, PICMA®, PILine®, NEXLINE®, PiezoWalk®, NEXACT®, Picoactuator®, PInano®, PIMag®,
Q-Motion®
The patents held by PI are found in our patent list: http://www.physikinstrumente.com/en/about-pi/patents
Notes on brand names and third-party trademarks:
BiSS is a registered trademark of iC-Haus GmbH.
© 2019 Physik Instrumente (PI) GmbH & Co. KG, Karlsruhe, Germany. The text, photographs, and drawings in
this manual are protected by copyright. With regard thereto, Physik Instrumente (PI) GmbH & Co. KG retains
all the rights. The use of any text, images and drawings is permitted only in part and only when indicating the
source.
Original instructions
First printing: 04.12.2019
Document number: MS207E, BRo, Version 2.3.0
Subject to change. This manual is superseded by any new release. The latest respective release is available for
download (p. 3) on our website.
1About this Document 1
1.1 Objective and Target Audience of this User Manual.................................................. 1
1.2 Symbols and Typographic Conventions...................................................................... 1
1.3 Figures ........................................................................................................................ 2
1.4 Other Applicable Documents ..................................................................................... 2
1.5 Downloading Manuals................................................................................................ 3
2Safety 5
2.1 Intended Use .............................................................................................................. 5
2.2 General Safety Instructions ........................................................................................ 5
2.3 Organizational Measures............................................................................................ 5
3Product Description 7
3.1 Features and Applications .......................................................................................... 7
3.2 Model Overview ......................................................................................................... 7
3.3 Suitable Controllers .................................................................................................... 8
3.4 Product View .............................................................................................................. 9
3.5 Scope of Delivery........................................................................................................ 9
3.6 Accessories ............................................................................................................... 10
3.7 Technical Features.................................................................................................... 12
3.7.1 Struts............................................................................................................ 12
3.7.2 Reference Switch and Limit Switches.......................................................... 12
3.7.3 Control......................................................................................................... 12
3.7.4 Motion ......................................................................................................... 13
3.7.5 ID Chip.......................................................................................................... 16
4Unpacking 17
5Installation 19
5.1 General Notes on Installation................................................................................... 19
5.2 Determining the Permissible Load and Workspace ................................................. 20
5.3 Attaching the Snap-on Ferrite .................................................................................. 21
5.4 Grounding the Hexapod ........................................................................................... 22
5.5 Mounting the Hexapod on a Surface ....................................................................... 22
5.6 Fixing the Load to the Hexapod................................................................................ 24
5.7 Optional: Removing the Coordinate Cube ............................................................... 25
5.8 Connecting the Hexapod to the Controller .............................................................. 26
Contents
6Startup 29
6.1 General Notes on Startup......................................................................................... 29
6.2 Starting Up the Hexapod System ............................................................................. 30
7Maintenance 31
7.1 Performing a Maintenance Run ............................................................................... 31
7.2 Packing the Hexapod for Transport.......................................................................... 31
7.3 Cleaning the Hexapod .............................................................................................. 35
8Troubleshooting 37
9Customer Service 39
10 Technical Data 41
10.1 Specifications............................................................................................................ 41
10.1.1 Data Table.................................................................................................... 41
10.1.2 Maximum Ratings........................................................................................ 42
10.1.3 Cable Set Specifications............................................................................... 43
10.2 Ambient Conditions and Classifications ................................................................... 44
10.3 Dimensions ............................................................................................................... 44
10.4 Pin Assignment ......................................................................................................... 45
10.4.1 Power Supply Connection............................................................................ 45
10.4.2 Data Transmission Connection.................................................................... 45
11 Old Equipment Disposal 47
12 Glossary 49
13 Appendix 53
13.1 Explanations of the Performance Test Sheet........................................................... 53
13.2 EU Declaration of Conformity .................................................................................. 55
1 About this Document
H-820 Hexapod Microrobot MS207E Version: 2.3.0 1
In this Chapter
Objective and Target Audience of this User Manual..................................................................... 1
Symbols and Typographic Conventions ......................................................................................... 1
Figures............................................................................................................................................ 2
Other Applicable Documents......................................................................................................... 2
Downloading Manuals ................................................................................................................... 3
1.1 Objective and Target Audience of this User Manual
This manual contains information on using the H-820 as intended.
It assumes that the reader has a fundamental understanding of basic servo systems as well as
motion control concepts and applicable safety procedures.
The latest versions of the user manuals are available for download (p. 3) on our website.
1.2 Symbols and Typographic Conventions
The following symbols and typographic conventions are used in this user manual:
CAUTION
Dangerous situation
Failure to comply could lead to minor injury.
Precautionary measures for avoiding.
NOTICE
Dangerous situation
Failure to comply could cause damage to equipment.
Precautionary measures for avoiding the risk.
INFORMATION
Information for easier handling, tricks, tips, etc.
1
About this Document
1 About this Document
2 Version: 2.3.0 MS207E H-820 Hexapod Microrobot
Symbol/Label Meaning
1.
2.
Action consisting of several steps whose sequential order must be
observed
Action consisting of one or several steps whose sequential order is
irrelevant
List item
p. 5 Cross-reference to page 5
RS-232 Labeling of an operating element on the product (example: socket of the
RS-232 interface)
Warning sign on the product which refers to detailed information in this
manual.
1.3 Figures
For better understandability, the colors, proportions, and degree of detail in illustrations can
deviate from the actual circumstances. Photographic illustrations may also differ and must not
be seen as guaranteed properties.
1.4 Other Applicable Documents
The devices and software tools from PI mentioned in this documentation are described in their
own manuals.
Device/program Document
no.
Document content
C-887.5xx controller MS247EK Short instructions for hexapod systems
MS244E User manual
C887T0011 EtherCAT interface of the C-887.53 controller series
C887T0007 Coordinate Systems for Hexapod Microrobots
C887T0021 Motion of the Hexapod. Position and Orientation in
Space, Center of Rotation
PI Hexapod Simulation
Tool
A000T0068 Determining the workspace and the permissible load of
the hexapod
PC software included
in the controller's
scope of delivery
Various For details, see the user manual for the C-887.5xx
controller.
1 About this Document
H-820 Hexapod Microrobot MS207E Version: 2.3.0 3
1.5 Downloading Manuals
INFORMATION
If a manual is missing or problems occur with downloading:
Contact our customer service department (p. 39).
Downloading manuals
1. Open the website www.pi.ws.
2. Search the website for the product number (e.g., P-882) or the product family (e.g.,
PICMA® bender).
3. Click the corresponding product to open the product detail page.
4. Click Downloads.
The manuals are shown under Documentation.
5. Click the desired manual and fill out the inquiry form.
The download link will then be sent to the email address entered.
2 Safety
H-820 Hexapod Microrobot MS207E Version: 2.3.0 5
In this Chapter
Intended Use.................................................................................................................................. 5
General Safety Instructions............................................................................................................ 5
Organizational Measures............................................................................................................... 5
2.1 Intended Use
The hexapod microrobot (short "hexapod") is a laboratory device as defined by DIN EN 61010-1.
It is built for indoor use and use in an environment which is free of dirt, oil, and lubricants.
In accordance with its design, the hexapod is intended for positioning, adjusting, and shifting of
loads on six axes at various velocities.
The hexapod can only be used as intended in conjunction with a suitable controller available
from PI (p. 8), which coordinates all motion of the hexapod.
2.2 General Safety Instructions
The H-820 is built according to state-of-the-art technology and recognized safety standards.
Improper use can result in personal injury and/or damage to the H-820.
Use the H-820 for its intended purpose only, and only when it is in perfect technical
condition.
Read the user manual.
Eliminate any malfunctions that may affect safety immediately.
The operator is responsible for the correct installation and operation of the H-820.
2.3 Organizational Measures
User manual
Always keep this user manual together with the H-820.
The latest versions of the user manuals are available for download (p. 3) on our
website.
2
Safety
2 Safety
6 Version: 2.3.0 MS207E H-820 Hexapod Microrobot
Add all information from the manufacturer to the user manual, for example
supplements or technical notes.
If you give the H-820 to a third party, include this user manual as well as other relevant
information provided by the manufacturer.
Do the work only if the user manual is complete. Missing information due to an
incomplete user manual can result in minor injury and damage to equipment.
Install and operate the H-820 only after you have read and understood this user
manual.
Personnel qualification
The H-820 may only be installed, started, operated, maintained, and cleaned by authorized and
appropriately qualified personnel.
Autres manuels pour H-820
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels PI Robotique
Manuels Robotique populaires d'autres marques
STEMCenter USA
STEMCenter USA Pi-Bot v2.00 Manuel utilisateur
SunFounder
SunFounder PiDog Manuel utilisateur
Universal Robots
Universal Robots UR5 Manuel utilisateur
Universal Robots
Universal Robots E Series Manuel utilisateur
YASKAWA
YASKAWA MOTOMAN-MPL80 II Manuel utilisateur
EFORT
EFORT ECR5 Manuel d'instructions
