Phonic MICRO VI Manuel utilisateur
MICRO VI USER’S MANUAL PHONIC CORPORATEPage 2
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS!
WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Do not allow water or liquids to be spilled into this unit. If the unit has been exposed
to rain or liquids, please unplug the power cord immediately from the outlet (with
DRY HANDS) and get a qualified service technician to check it. Keep this unit away
from heat sources such as radiators, heat registers, stoves, etc.
This unit contains no user-serviceable parts. Refer all service needs
to a qualified service engineer through a Phonic dealer.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COV-
ERS (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
ALL SERVICING TO A QUALIFIED SERVICE PERSONNEL.
Keep this unit clean by using a soft dry brush and occasionally wiping it with a damp
cloth. Do not use any other solvents, which may damage the paint or plastic parts.
Regular care and inspection will be rewarded by a long product life and maximum
reliability.
This unit was carefully packed at the manufacturing site and the packing box was
designed to protect the unit from rough handling. We recommend that you carefully
examine the packaging and its contents for any signs of physical damage which
may have occurred during transportation.
If the unit is damaged: Notify your dealer and the shipping company immedi-
ately. Claims for damage or replacement may not be granted if not reported
properly or in a timely manner.
MICRO VI USER’S MANUAL Page 3PHONIC CORPORATE
INTRODUCTION...........................................4
FEATURES...............................................4
GETTING START............................................4
FRONT PANEL..............................................5
BACK PANEL................................................6
RACK MOUNTING ..........................................7
SPECIFICATION .........................................8
CONTENTS
Phonic reserves the right to improve or alter any information supplied within this
document without prior notice. V1.2 Nov.12, 2002
MICRO VI USER’S MANUAL PHONIC CORPORATEPage 4
INTRODUCTION / FEATURES / GETTING START
INTRODUCTION
Congratulations on your purchase of the
MICRO VI effect processor. MICRO VI
is a high quality and user-friendly ste-
reo digital effect processor. To take full
advantage of the MICRO VI
’
s func-
tions, and enjoy a long and trouble-free
operation, please read this user
’
s manual
carefully and keep it for future refer-
ence.
FEATURES
1. Check the AC voltage before con-
necting the AC plug. This product is
equipped with cord clinch, which en-
ables securing the power cable to
this unit. This is a safety feature and
should not be defeated.
2. Run audio cables separately from
dimmer wiring, using balanced lines
wherever possible. If necessary,
cross audio and lighting cables at 90-
degree right angles to minimize the
possibility of interference. Keep un-
balanced cabling as short as possible.
3. Before plugging in the main power,
keep the output level control knob all
the way left to prevent damage of
excessive noise caused by bad level
adjustment, wrong wiring, defective
cables, or bad connection.
4. Never use solvents on this unit; clean
it only with a soft, dry cloth.
GETTING START
16 digital effects
Programs include reverb, delay,
echo, flange and effect combina-
tions
24
-
bit digital signal processing
plus 20 bit AD/DA conversions
True stereo reverb
Compact 1/3 rack unit, can be
easily rack-mounted with RT-3
(optional) rack tray
Foot SW jack allows user to mute
the effect via a footswitch
Bi-color peak LEDs for easy set-
ting of input level
Two 10VAC power jacks(In &
Through)
MICRO VI USER’S MANUAL Page 5PHONIC CORPORATE
FRONT PANEL
FRONT PANEL
1. SIGNAL/PEAK (L/R) INDICATOR
There is one bi-color LED for left and
right channel respectively. In most
cases, they light up green as signal
LEDs, and turn red when receiving a
peak level signal. In general, a few
red flashes every now and then will
not be a problem. If one of the LEDs
flash red very often or remains on,
the input level should be reduced.
2. INPUT LEVEL CONTROL
The input control knob sets the level
going into MICRO VI. The level should
be set so that Peak indicators flash
red only occasionally.
3. MIX (DRY / WET) CONTROL
This control sets the balance between
the unaffected signal coming through
the inputs and the effect-processed
signal being generated by MICRO
VI(i.e.: the balance of wet
and
dry/
e
ffect
-
processed and
w
ith no ef-
fect). By keeping it somewhere in the
center, a blend of dry and wet signal
can therefore be produced.
4. PROGRAM
The list on the left shows you the 16
effect programs available on MICRO
VI. Use the detented control knob to
select one of the 16 effects for the
main output.
5. OUTPUT CONTROL
This rotary control knob sets the sig-
nal level going to the amplifier or
mixer from the output of MICRO VI.
6. POWER INDICATOR
This red LED will illuminate when
adapter is plugged in.
MICRO VI USER’S MANUAL PHONIC CORPORATEPage 6
BACK PANEL
BACK PANEL
7. CORD CINCH
After connect the power cord to the
AC input, use a screwdriver to
unscrew it and place the power cord
inside of the cinch to safely secure
the power cable.
8. POWER SUPPLY INPUT SOCKET
Connect the power cable in the IN
socket. You may use another power
cable to connect one MICRO VI to
another by connecting the THRU to
IN.
9. FOOTSWITCH
A 1/4
”
mono phone jack for connect-
ing a momentary foot switch; users
can easily activate/cancel the effect
program via the foot switch.
10. OUTPUT (LEFT & RIGHT)
They are two 1/4
”
mono jacks for
connection such as effects returns
on a mixing console.
11. INPUT (LEFT/MONO & RIGHT)
A pair of 1/4
”
mono jacks for user
to connect to sources such as
effects sends of a mixing console.
For mono applications, use only the
“
L(MONO)
”
input.
MICRO VI USER’S MANUAL Page 7PHONIC CORPORATE
RACK MOUNTING
All of the MICRO series can be easily
rack mounted. Use a 19
”
wide, 1 rack
unit high RT-3 rack tray (optional) to
mount one to three MICRO series unto
the rack.
Fix the MICRO with the hook under the
unit, and fix it with two screws (optional)
unto the back panel.
After fixing your MICRO series(s),
mount this rack tray onto the rack.
MOUNTING YOUR MICRO SERIES ONTO THE RACK:
MICRO VI USER’S MANUAL PHONIC CORPORATEPage 8
SPECIFICATIONS
SPECIFICATIONS
Table des matières
Autres manuels Phonic Équipement d'enregistrement
Phonic
Phonic i7300 ReverbMaster Manuel utilisateur
Phonic
Phonic FIREFLY 302 USB Manuel utilisateur
Phonic
Phonic i2600 Manuel utilisateur
Phonic
Phonic MQ 3229 Manuel utilisateur
Phonic
Phonic FIREFLY 302 USB Manuel utilisateur
Phonic
Phonic DFX 2000 Manuel utilisateur
Phonic
Phonic i7300 ReverbMaster Manuel utilisateur
Phonic
Phonic SupraCurve A6600 Manuel utilisateur
Phonic
Phonic DFX256 Manuel utilisateur
Phonic
Phonic MQ3300 Manuel utilisateur
Manuels Équipement d'enregistrement populaires d'autres marques
Strymon
Strymon NIGHTSKY Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur
Tews Technologies
Tews Technologies TPMC465 Manuel utilisateur
Honeywell
Honeywell Excel 50 Manuel utilisateur
SeaLevel
SeaLevel COMM+8.LPCI Manuel utilisateur
Arturia
Arturia AUDIOFUSE STUDIO Manuel utilisateur
