Phoenix Contact BL2 PPC Manuel utilisateur
User manual
UM EN BL2 PPC AIO 6 5
BL2 PPC indus tri al PC f o r IP6 5 envi r o nments
2020-03-09
PHOENIX CONTACT GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany
phoenixcontact.com
4065_en_A
BL2 PPC industrial PC for IP65 environments
Designation Order No.
BL2 PPC AIO65 2000 1138366
BL2 PPC AIO65 7000 1138367
User manual
This user manual is valid for:
UM EN BL2 PPC AIO65, Revision A
Table of contents
4065_en_A PHOENIX CONTACT 1/32
Table of contents
1 For your safety............................................................................................................................3
1.1 Labeling of warning notes......................................................................................3
1.2 Qualification of users .............................................................................................3
1.3 Field of application of the product..........................................................................3
1.3.1 Intended use ..........................................................................................3
1.3.2 Product changes ....................................................................................4
2 Overview and ordering data........................................................................................................5
2.1 Description ............................................................................................................5
2.2 Ordering data.........................................................................................................5
3 Installation...................................................................................................................................7
3.1 Mounting................................................................................................................7
3.1.1 VESA .....................................................................................................7
3.1.2 CS3000 mount .......................................................................................9
3.2 Interfaces.............................................................................................................10
3.2.1 Power connection ................................................................................11
3.2.2 Serial communication ...........................................................................12
4 Operation..................................................................................................................................13
4.1 LED operation .....................................................................................................13
5 Maintenance.............................................................................................................................15
5.1 Opening the housing............................................................................................15
5.1.1 VESA mount housing ...........................................................................15
5.1.2 CS3000 mount .....................................................................................16
5.2 Real-time clock battery ........................................................................................16
5.2.1 Battery disposal ..................................................................................17
5.3 UEFI reset............................................................................................................18
5.4 UEFI ....................................................................................................................19
A Technical appendix...................................................................................................................21
A 1 Technical data ................................................................................................... 21
B Appendixes...............................................................................................................................25
B 1 List of figures ...................................................................................................... 25
B 2 List of tables ....................................................................................................... 27
For your safety
4065_en_A PHOENIX CONTACT 3/32
1 For your safety
Read this user manual carefully and keep it for future reference.
1.1 Labeling of warning notes
1.2 Qualification of users
The use of products described in this manual is oriented exclusively to electrically skilled
persons or persons instructed by them. The users must be familiar with the relevant safety
concepts of automation technology as well as applicable standards and other regulations.
1.3 Field of application of the product
1.3.1 Intended use
The products described in this document are designed for use in manufacturing and
industrial environments.
The products are built according to the latest safety requirements. However, dangerous
situations or damage to the products or other property can arise from misuse of this device.
The products fulfill the requirements of the EMC directives and harmonized European
standards Any modifications to the systems can influence the EMC behavior.
This symbol indicates hazards that could lead to personal injury.
There are three signal words indicating the severity of a potential injury.
DANGER
Indicates a hazard with a high risk level. If this hazardous situation is not
avoided, it will result in death or serious injury.
WARNING
Indicates a hazard with a medium risk level. If this hazardous situation is not
avoided, it could result in death or serious injury.
CAUTION
Indicates a hazard with a low risk level. If this hazardous situation is not avoided,
it could result in minor or moderate injury.
This symbol together with the NOTE signal word alerts the reader to a situation
which may cause damage or malfunction to the device, hardware/software, or
surrounding property.
Here you will find additional information or detailed sources of information.
The device contains valuable recyclable materials, which should be utilized. The elec-
tronic circuit board is fitted with a lithium battery.
Dispose of the device separately from other waste, i.e., via an appropriate collection site.
BL2 PPC…AIO65…
4/32 PHOENIX CONTACT 4065_en_A
1.3.2 Product changes
Changes or modifications to hardware and software of the device are not permitted.
Incorrect operation or modifications to the device can endanger your safety or damage the
device. Do not repair the device yourself. If the device is defective, please contact
Phoenix Contact.
Overview and ordering data
4065_en_A PHOENIX CONTACT 5/30
2 Overview and ordering data
2.1 Description
The BL2 PPC…AIO65… IPC is a configurable panel PC (PPC) that utilizes the Intel®
processors chosen for their balance of processing power, graphic performance, and energy
efficiency. The robust design and I/O capability make the BL2 PPC…AIO65… a product
that can be used in a wide variety of applications.
Features
– Rugged housing for IP65 environments
– Fanless design
– Intel®Core™ i5 and N4200 processors available
– VESA and Bernstein CS3000-mount options
– Optional push-button housing
– Two integrated 10/100/1000 Ethernet ports with independent MAC addresses
– IP65 rating
– UEFI-configurable RS-232/422/485 communication port
– Up to 8 GB RAM
– USB 2.0 and 3.0 ports
2.2 Ordering data
Products
Description Type Order No. Pcs./Pkt.
Industrial panel PC, configurable, Intel®Pentium®N4200 processor
1.10/2.50 GHz
BL2 PPC AIO65 2000 1138366 1
Industrial panel PC, configurable, Intel®Core™ i5-7442EQ processor
2.10/2.90 GHz
BL2 PPC AIO65 7000 1138367 1
Accessories
Description Type Order No. Pcs./Pkt.
Service socket with USB (socket/plug), type A with 0.6 m cable SI-SES-U1A/0,6 1404514 1
Visit phoenixcontact.net/products for available accessories
Replacement parts
Description Type Order No. Pcs./Pkt.
Connector, printed circuit board connector MSTB 2,5/ 3-STF-5,08 1777992 1
Installation
4065_en_A PHOENIX CONTACT 7/30
3 Installation
3.1 Mounting
Depending upon the configuration ordered, there are several ways to mount the BL2
PPC…AIO65…. Use the appropriate section below to mount the BL2 PPC…AIO65….
3.1.1 VESA
The BL2 PPC AIO65... conforms to the VESA, MIS-D, 100, C hole pattern. Note that this
standard is for devices up to 14 kg (30 lb.).
Port connections pass through rubber grommets that, when installed properly, maintain the
IP65 rating of the device. Failure to properly install the cables through these grommets will
result in a lesser IP rating.
The grommets accept typical cable diameters. The cables must be installed through an
appropriate grommet that aligns with the connector to maintain the IP65 degree of
protection. Grommets are labeled per type of signal.
NOTE:
Install the BL2 PPC…AIO65… with adequate clearance around the heat sink to provide
sufficient air flow such that ambient temperatures do not exceed the operating limits.
Install cooling fan(s) in the enclosure, if necessary.
Exceeding the system temperature limits can result in performance degradation of any or
all components. It is therefore important that the ambient temperature of the installation
environment is kept within the system temperature limits of your BL2 PPC…AIO65….
Because the housing must be opened to route the cables through grommets and attach
them to the ports, cables should be installed and attached to the PC before attaching the
PC to the VESA mount.
Table 3-1 Minimum and maximum cable sizes
Cable Minimum cable
diameter (mm)
Maximum cable
diameter (mm)
Power supply 5.6 6.0
USB 2.7 3.1
COM 4.8 5.2
Audio 2.9 3.1
BL2 PPC…AIO65…
8/30 PHOENIX CONTACT 4065_en_A
To install a cable:
1. Loosen the captive screws (1) securing the rear cover (2) to the IPC and panel
assembly (3) and carefully raise the cover. Note that ground (4) and USB (5) cables are
connected internally and must be disconnected to fully separate the components.
Figure 3-1 Accessing ports in a VESA-mount configuration
2. Remove the desired grommet (6) from the rear cover by pushing it out from the inside.
3. Bend or flex the grommet to see the split. Remove the installed plug(s) from the
grommet.
4. Insert the desired cable(s) into the grommet. Route the cable(s) through the appropriate
opening in the rear cover.
5. Press the grommet into the opening in the door, making sure it is fully seated.
6. Repeat the process for all desired grommets and cables. If a cable is not inserted into
the grommet, the plug must remain installed.
7. With the cover held in close proximity to the IPC and panel assembly, plug all cables
into the appropriate ports (see Figure 3-3).
8. Coil and secure any cables inside the rear cover and put it in place. Secure cover with
the previously removed hardware.
CR2032
3V
ERROR RUN CF PWR
X1:PWR 24VDC X4:USB
X5:USB
X6:USB
X7:USB
X3:ETHX2:ETH
X8:COM
1
2
3
4
5
6
Ce manuel convient aux modèles suivants
4
Table des matières
