Philips SmartPro Active Manuel utilisateur

FC8820, FC8810

FC8820

Wheels stuck

ݓઁሂTopcover or dust containernot placed properly

רۆࠋࠦӧ๥໇٦ݾBumperstuck

ߓԎሑᇆሂRobot liftedup from ﬂoor

՚ֽϴุఓᇊୃስײᆋ༏ӧచColourof ﬂoor too dark

ֽϴဂ೨ขτBatterynot inserted properly / Charging error(switch is oﬀ)

׌ԁ໇ሑݾԍ׌մ༆Ĳܵၜܵтĳ5

1516

2928

English 6

Čeština 31

Lietuviškai 57

Magyar 83

Polski 109

Română 137

Slovenščina 163

English

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit

from the support that Philips offers, register your product at

www.philips.com/welcome.

General description

1 Handle of dust container lid

2 Dust container lid

3 Filter

4 Dust container

5 Top cover

6 Error codes table

7 Fan

8 Bumper

9 Docking station sensor

10 Power switch (to switch the robot on or off)

11 Front wheel

12 Side brush shafts

13 Drop-off sensors

14 Wheels

15 Battery cavity

16 Suction opening

17 Side brushes

18 Rechargeable battery

19 Battery cavity cover

20 Fixation blocks for dry wipes

21 Dry wipe holder

22 Dry wipes

23 Battery holder

24 Remote control

25 Charging cord

26 Pointer

27 Virtual wall unit (FC8820)

28 Docking station

29 Adapter

30 Small plug

Display and remote control

Remote control (FC8820)

1 Navigation buttons and start/stop

2 Cleaning time buttons

3 Cleaning mode buttons

4 Fan speed buttons

5 Docking button

6English

Remote control (FC8810)

1 Navigation buttons and start/stop

2 Cleaning time buttons

3 Cleaning mode buttons

4 Fan off button

5 Fan on button

6 Docking button

Control panel of docking station

1 Display with time, day and programming indications

2 Adjusting and setting buttons

Pointer (FC8820)

1 Pointer button

2 On/off button

3 Cleaning mode buttons

4 Cleaning time buttons

5 Docking button

How your robot works

What your robot cleans

This robot is equipped with features that make it a suitable cleaner to help

you clean the floors in your home.

The robot is especially suitable for cleaning hard floors, such as wooden,

tiled or linoleum floors. It may experience problems cleaning soft floors,

such as carpet or rugs. If you use the robot on a carpet or rug, please stay

close by the first time to see if the robot can deal with this type of floor. The

robot also needs supervision when you use it on very dark or shiny hard

floors.

English

How your robot cleans

Cleaning system

The robot has a 3-stage cleaning system to clean your floors efficiently.

-The two side brushes help the robot clean in corners and along walls.

They also help to remove dirt from the floor and move it towards the

suction opening.

-The suction power of the robot picks up loose dirt and transports it

through the suction opening into the dust container.

-The robot comes with a dry wipe holder that allows you to clean your

hard floor even more thoroughly with dry wipes.

Cleaning patterns

In its auto cleaning mode, the robot uses an automatic sequence of cleaning

patterns to clean each area of the room optimally. The cleaning patterns it

uses are:

1 Z-pattern or zigzag pattern

2 Random pattern

3 Wall-following pattern

8English

4 Spiral pattern

In its auto cleaning mode, the robot uses these patterns in a fixed

sequence:z-pattern, random pattern, wall-following pattern, and spiral

pattern.

When the robot has completed this sequence of patterns, it starts moving in

Z-pattern again. The robot continues to use this sequence of patterns to

clean the room until the rechargeable battery runs low, or until it is switched

off manually.

If the robot detects a particularly dirty area during its cleaning run, it

switches to spiral mode and switches to turbo fan speed (FC8820 only) to

ensure thorough dirt removal.

Note: You can also select each mode individually by pressing the

appropriate button on the remote control or the pointer (FC8820 only). The

manually selected modes are only active for a couple of minutes. After that,

the robot switches back to auto-cleaning mode.

For more details, see chapter 'Using your robot', section 'Cleaning modes'.

How your robot avoids height differences

The robot has three drop-off sensors in its bottom. It uses these drop-off

sensors to detect and avoid height differences such as staircases.

Note: It is normal for the robot to move slightly over the edge of a height

difference, as its front drop-off sensor is located behind the bumper.

Caution: In some cases, the drop-off sensors may not detect a staircase or

other height difference in time. Therefore monitor the robot carefully the

first few times you use it, and when you operate it near a staircase or

another height difference. It is important that you clean the drop-off

sensors regularly to ensure the robot continues to detect height

differences properly (see chapter ' Cleaning and maintenance' for

instructions).

Before first use

Mounting the side brushes

1Unpack the side brushes and place the robot upside down on a table or

on the floor.

2Push the side brushes onto the shafts on the bottom of the robot.

Note: Make sure you attach the side brushes properly. Press them onto

the shaft until you hear them lock into position with a click.

English

Inserting the rechargeable battery

You have to insert te rechargeable battery before use.

Note: Please handle the rechargeable battery with care. Avoid dropping the

battery. This will ensure maximum lifetime for your battery.

1Press the ribbed sections on the battery cavity cover to unlock it.

2Slide te battery cavity cover off the robot.

3Remove the plastic from the rechargeable battery.

this side up

4Insert the rechargeable battery into the battery cavity.

Note: Make sure that the print on the battery points upwards and that the

connectors point in the right direction.

5Slide the battery cavity cover back onto the robot.

Removing the tag from the remote control

The remote control works on a CR2025 coin-shaped battery. This battery is

protected with a protection tag that has to be removed before use.

1Pull the battery protection tag out of the battery compartment of the

remote control. Now the remote control is ready for use.

10 English

Autres manuels pour SmartPro Active

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Aspirateur

Philips

Philips FC9722/09 Manuel utilisateur

Philips

Philips SmallStar FC8234/01 Manuel utilisateur

Philips

Philips FC8740 Manuel utilisateur

Philips

Philips FC6148/01 Manuel utilisateur

Philips

Philips FC5828/02 Manuel utilisateur

Philips

Philips SmallStar FC8230/01 Manuel utilisateur

Philips

Philips FC9259 Manuel utilisateur

Philips

Philips FC8611 Manuel utilisateur

Philips

Philips HR8847/01 Manuel utilisateur

Philips

Philips Marathon FC9239 Manuel utilisateur

Philips

Philips FC8459 Manuel utilisateur

Philips

Philips Jewel FC9079 Manuel utilisateur

Philips

Philips HR8891/06 Manuel utilisateur

Philips

Philips SmartPro Active Manuel utilisateur

Philips

Philips FC6148/01 Manuel utilisateur

Philips

Philips FC6232/62 Manuel utilisateur

Philips

Philips FC8710 Manuel utilisateur

Philips

Philips AquaTrio FC7070 Manuel utilisateur

Philips

Philips IMPACT PLUS Manuel utilisateur

Philips

Philips SmartPro Active Manuel utilisateur

Philips

Philips FC8913/01 Manuel utilisateur

Philips

Philips FC6052/11 Manuel utilisateur

Philips

Philips FC8820 Manuel utilisateur

Philips

Philips FC8229/61 Manuel utilisateur

Manuels Aspirateur populaires d'autres marques

Bissell

Bissell LittleGreen Proheat 1425 Series Manuel utilisateur

Panasonic

Panasonic MC-YL637S147-AE Manuel utilisateur

NEFF

NEFF N17XH10 0 Series Manuel utilisateur

LG A9 Series Manuel utilisateur

Oreck

Oreck Cordless Captura BK51700 Series Manuel utilisateur

Kogan

Kogan KAVACROBVWA Manuel utilisateur

Kränzle

Kränzle VENTOS 50 ID Guide de l'utilisateur

EVVO

EVVO Ai35 Manuel utilisateur

DeWalt

DeWalt DWH200D Manuel utilisateur

Pontec

Pontec Pondomatic Vacuum Cleaner Manuel utilisateur

Cleanmaxx

Cleanmaxx PC-P007E Manuel utilisateur

Exido

Exido 240-114 Manuel utilisateur

RIDGID

RIDGID WD1685AU0 Manuel utilisateur

Ezviz

Ezviz RE4P Manuel utilisateur

STG global

STG global TANVAC HDV3000 Manuel utilisateur

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuel utilisateur

Factory

Factory M3340 Manuel utilisateur

Shop-Vac

Shop-Vac VN92 SERIES Manuel utilisateur