Philips FC8820 Manuel utilisateur

FC8820

FC8810

FC8820, FC8810

ENGLISH 6

БЪЛГАРСКИ 26

EESTI 48

HRVATSKI 68

LATVIEŠU 88

SLOVENSKY 108

SRPSKI 128

Introduction

Congratulations on your purchase and welcome to Philips!

To fully benet from the support that Philips offers, register your

product at www.philips.com/welcome.

Your robot (Fig. 1)

1 Handle of dust container lid

2 Dust container lid

3 Filter

4 Dust container

5 Top cover

6 Error codes table

7 Fan

8 Bumper

9 On/off button (switches robot on or to standby)

10 Power switch (switches robot on or off)

11 Front wheel

12 Side brush shafts

13 Drop-off sensors

14 Wheels

15 Battery cavity

16 Suction opening

17 Side brushes

18 Rechargeable battery

19 Battery cavity cover

20 Fixation blocks for dry wipes

21 Dry wipe holder

22 Dry wipes

23 Battery holder

24 Remote control

25 Charging cord

26 Pointer

27 Virtual wall unit

28 Docking station

29 Adapter

30 Small plug

Displays and control panels

Control panel of docking station

1 Display with time, day and programming indications

2 Adjusting and setting buttons

3 Battery indicator

ENGLISH

Remote control

1 Navigation buttons and on/off

2 Cleaning time buttons

3 Cleaning mode buttons

4 Fan speed buttons

5 Docking button

Pointer (FC8820)

1 Pointer button

2 On/off button

3 Cleaning mode buttons

4 Cleaning time buttons

5 Docking button

How your robot works

What your robot cleans

This robot is equipped with features that make it a suitable cleaner to help

you clean the oors in your home.

The robot is especially suitable for cleaning hard oors, such as wooden,

tiled or linoleum oors. It may experience problems cleaning soft oors,

such as carpet or rugs. If you use the robot on a carpet or rug, please stay

close by the rst time to see if the robot can deal with this type of oor.

The robot also needs supervision when you use it on black and shiny

hard oors.

How your robot cleans

Cleaning system

The robot has a 3-stage cleaning system to clean your oors efciently.

- The two side brushes help the robot clean in corners and along walls.

They also help to work dirt loose from the oor.

ENGLISH 7

- The suction power of the robot picks up loose dirt and transports it

through the suction opening into the dust container.

- The robot comes with a dry wipe holder that allows you to clean your

hard oor even more thoroughly with dry wipes.

Cleaning patterns

In its auto cleaning mode, the robot uses an automatic sequence of

cleaning patterns to clean each area of the room optimally.The cleaning

patterns it uses are:

1 Z-pattern or zigzag pattern

2 Random pattern

3 Wall-following pattern

4 Spiral pattern

During auto cleaning, the robot uses these patterns in a xed sequence:

1 Z-pattern

2 Random pattern

3 Wall-following pattern

4 Spiral pattern

- When the robot has completed this sequence of patterns, it starts

moving in Z-pattern again.The robot continues to use this sequence

of patterns to clean the room until the rechargeable battery is empty,

or until it is switched off manually.

- If the robot detects a particularly dirty area during its cleaning run,

it switches to spiral mode and to turbo fan speed to ensure thorough

dirt removal.

Note:You can also select each mode individually by pressing the appropriate

button on the remote control or pointer (FC8820 only). For more details,

see chapter ‘Using your robot’, section ‘Cleaning modes’.

ENGLISH8

How your robot avoids height differences

- The robot has three drop-off sensors in its bottom. It uses these drop-

off sensors to detect and avoid height differences such as staircases.

Note: It is normal for the robot to move slightly over the edge of a height

difference, as its front drop-off sensor is located behind the bumper.

Caution: In some cases, the drop-off sensors may not detect a staircase

or other height difference in time.Therefore monitor the robot carefully

the rst few times you use it, and when you operate it near a staircase

or another height difference.

Before rst use

Mounting the side brushes

1 Unpack the side brushes and place the robot upside down on a table

or on the oor.

2 Push the side brushes onto the shafts on the bottom of the robot.

Note: Make sure you attach the side brushes properly. Press them onto the

shaft until you hear them lock into position with a click.

Inserting the rechargeable battery into the robot

You have to insert the rechargeable battery before use.

1 Press the ribbed sections on the battery cavity cover to unlock it.

2 Slide the battery cavity cover off the robot.

3 Remove the plastic from the rechargeable battery.

ENGLISH 9

4 Place the rechargeable battery into the battery cavity.

Note: Make sure that the print on the battery points upwards and that the

connectors point in the right direction.

5 Slide the battery cavity cover back onto the robot.

Removing the protection tag from the remote control

The remote control works on a CR2025 coin-shaped battery.This battery

is protected with a protection tag that has to be removed before use.

1 Pull the battery protection tag out of the battery compartment of

the remote control.

,Now the remote control is ready for use.

Preparing for use

Installing the docking station

1 Insert the small plug of the adapter into the socket on the docking

station (1) and insert the adapter into the wall socket (2). The display

of the docking station lights up.

2 Place the docking station on a horizontal, level oor against the wall.

Tip: To ensure the docking station stays rmly in the selected spot, you can

fasten it to the wall with screws or with two strips of double-sided tape.

Note: Make sure that there are no obstacles or height differences 80cm in

front, 30 cm to the right and 100cm to the left of the docking station.

Charging

When you charge the rechargeable battery for the rst time and when the

rechargeable battery is empty, the charging time is four hours.

Your robot can be charged in two ways:

- On the docking station, either manually or automatically during use;

ENGLISH10

Autres manuels pour FC8820

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Aspirateur

Philips

Philips MiniVac FC6132 Manuel utilisateur

Philips

Philips FC6053 Manuel utilisateur

Philips

Philips FC9320/09 Manuel d'utilisation

Philips

Philips FC8450 Manuel utilisateur

Philips

Philips MiniVac FC6132 Manuel utilisateur

Philips

Philips HR6835 Manuel utilisateur

Philips

Philips FC9057/01 Manuel utilisateur

Philips

Philips FC8820 Manuel utilisateur

Philips

Philips FC 9012 Manuel utilisateur

Philips

Philips FC8149 Manuel utilisateur

Philips

Philips FC8729 Manuel utilisateur

Philips

Philips MiniVac FC6132 Manuel utilisateur

Philips

Philips FC9262 Manuel utilisateur

Philips

Philips Expression HR8310/01 Manuel utilisateur

Philips

Philips FC8344 Manuel utilisateur

Philips

Philips FC6402 Manuel utilisateur

Philips

Philips FC9734 Manuel utilisateur

Philips

Philips StudioPower FC9080 SERIES Manuel

Philips

Philips FC6149 Manuel utilisateur

Philips

Philips Marathon FC9219 - FC9200 Manuel utilisateur

Philips

Philips Specialist II Manuel utilisateur

Philips

Philips FC9266/01 Manuel utilisateur

Philips

Philips City Line New York Manuel utilisateur

Philips

Philips FC9166 Manuel utilisateur

Manuels Aspirateur populaires d'autres marques

Bissell

Bissell LittleGreen Proheat 1425 Series Manuel utilisateur

Panasonic

Panasonic MC-YL637S147-AE Manuel utilisateur

NEFF

NEFF N17XH10 0 Series Manuel utilisateur

LG A9 Series Manuel utilisateur

Oreck

Oreck Cordless Captura BK51700 Series Manuel utilisateur

Kogan

Kogan KAVACROBVWA Manuel utilisateur

Kränzle

Kränzle VENTOS 50 ID Guide de l'utilisateur

EVVO

EVVO Ai35 Manuel utilisateur

DeWalt

DeWalt DWH200D Manuel utilisateur

Pontec

Pontec Pondomatic Vacuum Cleaner Manuel utilisateur

Cleanmaxx

Cleanmaxx PC-P007E Manuel utilisateur

Exido

Exido 240-114 Manuel utilisateur

RIDGID

RIDGID WD1685AU0 Manuel utilisateur

Ezviz

Ezviz RE4P Manuel utilisateur

STG global

STG global TANVAC HDV3000 Manuel utilisateur

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuel utilisateur

Factory

Factory M3340 Manuel utilisateur

Shop-Vac

Shop-Vac VN92 SERIES Manuel utilisateur