Philips 32PFS6402/12 Manuel utilisateur

Published by YMC/SC 1734 Quality Subject to modification 3122 785 20480

2017-Aug-24

2017 © TP Vision Netherlands B.V.

property of Koninklijke Philips Electronics N.V. or their respective owners.

TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust

earlier supplies accordingly.

PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.

Chassis name Platform Model name

QM17.4E LA MTK5593F 32PFS6402/12

QM17.4E

Published by YMC/SC 1734 Quality Subject to modification 3122 785 20480

2017-Aug-24

2017 © TP Vision Netherlands B.V.

property of Koninklijke Philips Electronics N.V. or their respective owners.

TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust

earlier supplies accordingly.

PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.

Product inforamtion…….………………………………………………………………………………………3

Connections overview ..…..…..………………..………………………………………………………………5

3. Mechanical Instruction ……………….……………………………………………………………………. 6

Cable dressing (32" 6402 series)……………………………………………………………………………6

Assembly/Panel Removal ……………………………………………………………………………………7

4. Service Modes………….……………….………………….…………………………………………….….10

5. Software upgrading, Error Code and Panel Code……...……………………………………………..14

6. Circuit Descriptions…..…………………….………………………………………………………………19

7. IC Data Sheet ……...…………………………………………………………………………………….…..27

8. Circuit Diagrams ……………...…………………………………………………………………………….33

8.1 715G7364 PSU………………………………………………………………………..…………………33

8.2 715G7030 SSB………………………………………………………..…………………………………35

8.3 715G7785 IR/LED Panel………………………………………………………………………………..50

8.4 715G7118 Keyboard control pane…………………………………..…………………………………51

9. Styling Sheet……………….………………….……………………………………………………………..52

6402 series 32"……………………………………………………………..…………………………………52

Product information

2. Connections Overview

3. Mechanical Instructions

3.1 Cable Dressing

Cable dressing (32" 6402 series)

3.2 Assembly/Panel Removal

3.2.1 Stand removal

Refer to 3-1 and 3-2 for details.

Warning: Disconnect the mains power cord before removing the rear cover.

1. Remove fixation screws [1] that secure the base assy, pull out the base assy from the set. Refer to 3-1 for details.

2. Remove the fixation screws [2], [3] and [4] that secure the rear cover. Refer to 3-1 for details.

3-1 Rear cover removal[1]

3. Unplug the connector [5] from SSB. Refer to 3-2for details.

4. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.

3-2 Rear cover removal[2]

3.2.2 AmbiLight Panel

Refer to 3-3 for details.

1. Gently release the clamps and unplug the connectors [4] that secure the ambilight panels. Release the clips from the FFC connector that connect with

the keyboard [5].

2. Lift the AmbiLight panel from the rear cover. Make sure that wires and flat foils are not damaged while lifting the ambilight panel from the rear cover..

3-3 Ambilight and Keyboard removal

3.2.3 Keyboard Control Unit

Refer to 3-3 for details.

1. Release the connectors [2] and [3] from the keyboard control panel.

Caution: be careful, as these are very fragile connectors!

2. Remove all the fixation screws from the keyboard control panel [1] and take it out from the Back cover. When defective, replace the whole unit.

3.2.4 Small Signal Board (SSB)

Refer to 3-4 for details.

Caution: it is mandatory to remount all different screws at their

original position during re-assembly. Failure to do so may result

in damaging the SSB.

1. Release the clips from the LVDS connector that connect

with the SSB[1].

Caution: be careful, as these are very fragile connectors!

2. Unplug all other connectors [2] .

3. Remove all the fixation screws from the SSB [3].

4. The SSB can now be shifted from side connector cover,

then lifted and taken out of the I/O bracket. Refer to

1. 3-4 for details.

3-4 SSB removal

3.2.5 IR board Control Unit

Refer to 3-5 and 3-6 for details.

1. Remove the fixation screws [1] from the stand bracket, pull out the assy from the set. Refer to 3-5 for details.

2. Carefully Releas the cover secured by clips, then unplug the connector [2] from the IR/LED board. The IR/LED Board can now be lifted and taken out

from the cover. Refer to 3-6 for details.

3-5 IR/LED Board removal[1]

3-6 IR/LED Board removal[2]

3.2.6 Power Supply Unit (PSU)

Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the PSU.

1. Gently unplug all connectors from the PSU.

2. Remove all fixation screws from the PSU.

3. The PSU can be taken out of the set now.

3.2.7 Speakers

Gently release the tapes that secure the speaker cables. Unplug the speaker connector from the SSB. Take the speakers out. When defective, replace the

both units.

3.2.8 WIFI module

1. Unplug the connector from the SSB..

2. Remove fixation screw that secure the WIFI module,

When defective, replace the whole unit.

3.2.9 LCD Panel

Remove the SSB as described earlier.

Remove the keyboard control panel as described earlier.

Remove the stand bracket as described earlier.

Remove the IR/LED as described earlier.

Remove the fixations screws that fix the metal clamps to the front bezel.Take out those clamps.

Remove all other metal parts not belonging to the panel.

Lift the LCD Panel from the bezel.When defective, replace the whole unit.

4. Service Modes

4.1 Service Modes

The Service Mode feature is split into following parts:

Service Alignment Mode (SAM).

Factory Mode.

Customer Service Mode (CSM).SAM and the Factory mode offer features, which can be used by the Service engineer to repair/align a TV set.

SAM and the Factory mode offer features, which can be used by the Service engineer to repair/align a TV set. Some features are:

Make alignments (e.g.White Tone), reset the error buffer(SAM and Factory Mode).

Display information (“SAM” indication in upper right corner of screen, error buffer, software version, operating hours,options and option codes, sub menus).

The CSM is a Service Mode that can be enabled by the consumer. The CSM displays diagnosis information, which the customer can forward to the dealer

or call centre.In CSM mode, “CSM”, is displayed in the top right corner of the screen.The information provided in CSM and the purpose of CSM is to:

Increase the home repair hit rate.

Decrease the number of nuisance calls.

Solved customers’problem without home visit.

Note: For the new model range, a new remote control (RC) is used with some renamed buttons.This has an impact on the activation of the Service modes.

For instance the old “MENU” button is now called “HOME” (or is indicated by a “house” icon).

4.2 Service Alignment Mode (SAM)

Purpose

To modify the NVM.

To display/clear the error code buffer.

To perform alignments.

Specifications

Operation hours counter (maximum five digits displayed).

Software version, error codes, and option settings display.

Error buffer clearing.

Option settings.

Software alignments (White Tone).

NVM Editor.

Set screen mode to full screen (all content is visible).

How to Activate SAM

To activate SAM, use one of the following methods:

Press the following key sequence on the remote control transmitter: “062596”, directly followed by the “INFO/OK” button. Do not allow the display to time

out between entries while keying the sequence.

Or via ComPair.

After entering SAM, the following items are displayed,

with “SAM”in the upper right corner of the screen to indicate that the television is in Service Alignment Mode.

How to Navigate

In the SAM menu, select menu items with the UP/DOWN keys on the remote control transmitter. The selected item will be indicated. When not all menu

items fit on the screen, use the UP/DOWN keys to display the next/previous menu items.

With the “LEFT/RIGHT” keys, it is possible to:

(De) activate the selected menu item.

(De) activate the selected sub menu.

Change the value of the selected menu item.

Table des matières

Autres manuels Philips TV

Philips

Philips 20TP2322 Manuel utilisateur

Philips

Philips 32PFL6606H Manuel utilisateur

Philips

Philips 6803 series Manuel utilisateur

Philips

Philips 29PT8304 Manuel utilisateur

Philips

Philips 42PFL4208M Manuel utilisateur

Philips

Philips 20GR1250 Manuel utilisateur

Philips

Philips M123A Manuel utilisateur

Philips

Philips 37PF9731 Manuel utilisateur

Philips

Philips 33ML8905 Manuel utilisateur

Philips

Philips 47PF9541 Manuel utilisateur

Philips

Philips 29PT8304 Manuel utilisateur

Philips

Philips 20HF5335D Manuel utilisateur

Philips

Philips OLED718 Series Manuel utilisateur

Philips

Philips 28PT7304 Manuel utilisateur

Philips

Philips 32DW6559/01 Manuel utilisateur

Philips

Philips 37PFL5332D - 37" LCD TV Manuel utilisateur

Philips

Philips Roku TV 4756 Series Manuel utilisateur

Philips

Philips 49PUS6162 Manuel utilisateur

Philips

Philips 37PFL7332/10 Manuel utilisateur

Philips

Philips 55PUT6103 Manuel utilisateur

Philips

Philips Matchline 32PW960B Manuel utilisateur

Philips

Philips 8007 Series Manuel utilisateur

Philips

Philips 25PT4223 Manuel utilisateur

Philips

Philips 27PT31B1 Manuel utilisateur

Manuels TV populaires d'autres marques

Toshiba

Toshiba 27A10 Manuel utilisateur

Hitachi

Hitachi 32FX48B Manuel utilisateur

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur

Changhong Electric

Changhong Electric uhd55b6000is Manuel utilisateur

Panasonic

Panasonic Genus TX-G10 Manuel utilisateur

Toshiba

Toshiba 19A20 Manuel utilisateur

Sony

Sony XBR-100Z9D Manuel utilisateur

Samsung

Samsung 55S9 B Series Manuel utilisateur

Sharp

Sharp LC-40FI5012E Manuel utilisateur

Loewe

Loewe Table Stand Reference 55 Manuel utilisateur

Sylvania

Sylvania 6427FB Manuel utilisateur

Sanyo

Sanyo CE19LD90N-B Manuel utilisateur

North State

North State TV2GO Manuel utilisateur

RCA

RCA RTU7877 Manuel utilisateur

Sharp

Sharp 21K-FG1RU Manuel utilisateur

Sony

Sony Esprit TAV-L1 Manuel utilisateur

Grundig

Grundig 43 VLE 4820 Manuel utilisateur

Samsung

Samsung LN26C350D1D Manuel utilisateur