Philips MCD139B/79 Manuel utilisateur
MCD139B
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
1
4
7
2
5
8
0
3
6
9
PROG
GOTO
VOL
+
ZOOM
DSC
DBB
SUBTIT LE
1
Quick Start Guide
2
Composite Video Cable DIN cable Remote control with one
CR2025 battery loaded
FM wire antenna Quick start guide User manual
MCD139B QSG_79_Eng 2007.5.23, 16:281
Important!
–This set can only be operated after the
supplied DIN cable has been connected.
Tips
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
3
4
5
Connect the speaker wires of the right speaker and subwoofer to the
left speaker.
Connect the left speaker and the DVD player by using the supplied
DIN cable.
Connect the DVD player to your TV using the supplied composite video
cable.
Connect the VCR or cable/satellite box to the TV system. Connect AUX
IN 1 jacks to the AUDIO OUT jacks on theVCR or cable/satellite box.
2
Connect the supplied FM wire antenna.
Setting up the TV
Press SOURCE on the set (or DISC on the remote) to select disc source.
Turn on the TV and set it to the correct Video In channel.
1
2
ATo listen to TV channels through this system, use the
audio cable (white/red, not supplied) to connect
AUX IN 1 (L/R) jacks to the corresponding AUDIO
OUT jacks on the TV set.
BTo listen to TV channels through this system, use the
audio cable (white/red, not supplied) to connect
AUX IN 1 (L/R) jacks to the HEADPHONE jack on
the TV set.
●Before starting operation, press AUX1/2/TV on
the remote control to select “AUX 1” to activate
the input source.
●See the User Manual for other TV connection options.
AC Power Cord
8
6
6
Connect the AC power cord to the wall socket.
OUT
IN
MCD139B QSG_79_Eng 2007.5.23, 16:282
Tip
See chapters "Getting Started" and "DVD menu operations" in the
User Manual for detailed descriptions.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connectedTV does not support
progressive signals or the video cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1)Turn off your TV progressive scan mode then turn on to interlaced mode.
2) Select “OFF” in PROGRESSIVE menu of the system setup menu to turn off
progressive scan, then press SYSTEM MENU on the remote to exit the system
menu.
Or To turn off progressive scan, you may also first press OPEN/CLOSE open the
disc door, then press
1
on the remote control, and press AUDIO on the remote.
Setting the clock
1
2
3
4
ETUMOIDU
+
In standby or any source mode, press and hold CLOCK on the remote control.
The clock digits will be lighted on the display.
Press ¡/ ™on the set repeatedly to set the hours.
Press à/ áon the set repeatedly to set the minutes.
I
VOL
+
Press CLOCK again to store the setting.
PHILIPS PHILIPS
PHILIPS
MCD139B QSG_79_Eng 2007.5.23, 16:283
Playing a disc
1
2
3
4
Push OPEN /CLOSEçto open the disc door.
Load in a disc with the label side facing up, then close the disc door.
Playback will start automatically. If not, pressÉÅ.
To stop playback, press 9.
PDCC-JS/JW-0719
CRoyal Philips Electronics N.V. 2007
All rights reserved.
http://www.philips.com
Tip
Detailed playback features and
additional functions are described in the
accompanied user manual.
Programming and tuning to radio stations
1
2
3
Press SOURCE (or TUNER on the remote) to select tuner source (FM).
Press and hold PROG on the set (or on the remote control) until “ START ” appears on
the display panel. The system starts to program all available stations in order of waveband.
Press ¡/ ™until the desired preset station is displayed.
To s witch on the system,
press STANDBY ONBor
SOURCE on the set, or
DISC,AUX1/2/TV or
TUNER on the remote.
Notes for the remote control:
–First, select the source you wish to
control by pressing one of the source
select keys on the remote control
(DISC or AUX1/2/TV, for example).
–Then select the desired function
(2;, í, ëfor example).
TUNING
MCD139B QSG_79_Eng 2007.5.23, 16:284
Autres manuels pour MCD139B/79
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Philips Système stéréo
Philips
Philips MCB240 Manuel utilisateur
Philips
Philips FWM185 Instructions de construction
Philips
Philips DCD2030/98 Manuel utilisateur
Philips
Philips FWM569/37X Manuel utilisateur
Philips
Philips FW-R8 Manuel utilisateur
Philips
Philips Micro Hi-Fi System MCM285 Manuel utilisateur
Philips
Philips BTM2360/61 Manuel utilisateur
Philips
Philips FW 2015 Manuel utilisateur
Philips
Philips FWI2 Manuel utilisateur
Philips
Philips DCB-188 Manuel utilisateur
Philips
Philips DCM3160 Manuel utilisateur
Philips
Philips FWD798/55 Manuel d'utilisation
Philips
Philips FWM154/12 Manuel utilisateur
Philips
Philips MC-130/21M Manuel utilisateur
Philips
Philips MCP9360I/31 Manuel utilisateur
Philips
Philips FWM400D/05 Manuel utilisateur
Philips
Philips MCM355 Manuel utilisateur
Philips
Philips FWD182 Manuel utilisateur
Philips
Philips FW-R7 Manuel utilisateur
Philips
Philips FW-V795 Manuel utilisateur
