Philips HTL5145B Manuel utilisateur

www.philips.com/support

Always there to help you

User manual

Question?

Contact

Philips

HTL5145B

1EN

Contents

1 Important 2

Safety 2

Care for your product 3

Care of the environment 3

Compliance 3

Help and support 3

2 Your SoundBar 4

Main unit 4

Remote control 4

Connectors 5

Wireless subwoofer 6

3 Connect and set up 6

Place subwoofer 6

Pair up with the subwoofer 7

Connect to TV 7

Connect digital devices through HDMI 8

Connect audio from TV and other devices 8

4 Use your SoundBar 9

Adjust the volume 9

Choose your sound 9

Play audio through Bluetooth 10

Connect Bluetooth via NFC 10

MP3 player 11

USB storage devices 11

Auto standby 11

Set display brightness 11

Apply factory settings 12

5 Update software 12

Check software version 12

Update software via USB 12

6 Wall mount 13

7 Productspecications 14

8 Troubleshooting 15

2EN

1 Important

Read and understand all instructions before you

use your product. If damage is caused by failure

to follow instructions, the warranty does not

apply.

Safety

Riskofelectricshockorre!

• Never expose the product and accessories

to rain or water. Never place liquid

containers, such as vases, near the product.

If liquids are spilt on or into the product,

disconnect it from the power outlet

immediately. Contact Consumer Care to

have the product checked before use.

• Never place the product and accessories

near naked ames or other heat sources,

including direct sunlight.

• Never insert objects into the ventilation

slots or other openings on the product.

• Where the mains plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

• Disconnect the product from the power

outlet before lightning storms.

• When you disconnect the power cord,

always pull the plug, never the cable.

Riskofshortcircuitorre!

• Before you connect the product to the

power outlet, ensure that the power

voltage matches the value printed on the

back or bottom of the product. Never

connect the product to the power outlet if

the voltage is different.

Riskofinjuryordamagetothisproduct!

• Never place the product or any objects

on power cords or on other electrical

equipment.

• If the product is transported in

temperatures below 5°C, unpack the

product and wait until its temperature

matches room temperature before

connecting it to the power outlet.

• Parts of this product can be made of

glass. Handle with care to avoid injury and

damage.

Riskofoverheating!

• Never install this product in a conned

space. Always leave a space of at least four

inches around the product for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the product.

Riskofcontamination!

• Do not mix batteries (old and new or

carbon and alkaine, etc.).

• Danger of explosion if batteries are

incorrectly replaced. Replace only with the

same or equivalent type.

• Remove batteries if they are exhausted or

if the remote control is not to be used for

a long time.

• Batteries contain chemical substances, they

should be disposed of properly.

Riskofswallowingbatteries!

• The product/remote control may contain

a coin/button type battery, which can be

swallowed. Keep the battery out of reach

of children at all times! If swallowed, the

battery can cause serious injury or death.

Severe internal burns can occur within two

hours of ingestion.

• If you suspect that a battery has been

swallowed or placed inside any part of the

body, seek immediate medical attention.

• When you change the batteries, always

keep all new and used batteries out of

reach of children. Ensure that the battery

compartment is completely secure after

you replace the battery.

• If the battery compartment cannot be

completely secured, discontinue use of the

product. Keep out of reach of children and

contact the manufacturer.

3EN

This is CLASS II apparatus with double

insulation, and no protective earth provided.

Care for your product

Use only microber cloth to clean the product.

Care of the environment

Disposal of your old product and battery

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

This symbol on a product means that the

product is covered by European Directive

2012/19/EU.

This symbol means that the product contains

batteries covered by European Directive

2013/56/EU which cannot be disposed of with

normal household waste.

Inform yourself about the local separate

collection system for electrical and electronic

products and batteries. Follow local rules and

never dispose of the product and batteries

with normal household waste. Correct disposal

of old products and batteries helps prevent

negative consequences for the environment and

human health.

Removing the disposable batteries

To remove the disposable batteries, see battery

installation section.

Compliance

This product complies with the radio

interference requirements of the European

Community.

Hereby, Gibson Innovations declares that

this product is in compliance with the

essential requirements and other relevant

provisions of Directive 1999/5/EC.You

can nd the Declaration of Conformity on

www.p4c.philips.com.

Help and support

For extensive online support, visit

www.philips.com/support to:

• download the user manual and the quick

start guide

• watch video tutorials (available only for

selected models)

• nd answers to frequently answered

questions (FAQs)

• email us a question

• chat with our support representative.

Follow the instructions on the website to select

your language, and then enter your product

model number.

Alternatively, you can contact Consumer Care

in your country. Before you contact, note down

the model number and serial number of your

product. You can nd this information on the

back or bottom of your product.

4EN

2 Your SoundBar

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips offers, register your

SoundBar at www.philips.com/support.

Main unit

This section includes an overview of the main

unit.

a (Standby-On/Standby indicator)

• Switch the SoundBar on or to standby.

• When the SoundBar is in standby, the

standby indicator turns red.

b SOURCE

Select an input source for the SoundBar.

c Display panel

d +/- (Volume)

Increase or decrease volume.

e NFC tag

Tap the NFC-enabled device on the tag for

Bluetooth connection.

d ea b c

Remote control

This section includes an overview of the

remote control.

a (Standby-On)

Switch the SoundBar on or to standby.

b Source buttons

• HDMI ARC: Switch your source to

HDMI ARC connection.

• HDMI IN: Switch your source to the

HDMI IN connection.

• : Switch to Bluetooth mode.

• USB: Switch to USB mode.

• OPTICAL: Switch your audio source

to the optical connection.

• AUX: Switch your audio source to

the AUDIO IN or AUX connection

(3.5mm jack).

e m

5EN

c / (Previous/Next)

Skip to the previous or next track in USB

mode.

d (Play/Pause)

• Start, pause or resume play in USB

mode.

e BASS +/-

Increase or decrease bass.

f Volume control

• +/-: Increase or decrease volume.

• : Mute or restore volume.

g SOUND

Select a sound mode.

h SURROUND ON/OFF

Select surround or stereo sound.

i AUTO VOL ON/OFF

Turn auto volume on or off.

j NIGHT ON/OFF

Turn night mode on or off.

k AUDIO SYNC +/-

Increase or decrease audio delay.

l DIM

Set the brightness of SoundBar display

panel.

m TREBLE +/-

Increase or decrease treble.

Connectors

This section includes an overview of the

connectors available on your SoundBar.

a DC IN

Connect to the power supply.

b AUX IN

Connect to an audio output on a device

via AUDIO IN or AUX source (by pressing

repeatedly AUX on the remote control).

c OPTICAL IN

Connect to an optical audio output on the

TV or a digital device.

d HDMI OUT (ARC) - TO TV

Connect to the HDMI input on the TV.

e HDMI IN

Connect to the HDMI output on a digital

device.

• Audio input from a USB storage

device.

• Upgrade software of this product.

• Charge a USB device.

6EN

Wireless subwoofer

The SoundBar comes with a wireless subwoofer.

a Subwoofer indicator

• When the power is turned on, the

indicator lights up.

• During wireless pairing between the

subwoofer and the main unit, the

indicator blinks white quickly.

• When the pairing succeeds, the

indicator lights up white.

• When the pairing fails, the indicator

blinks white slowly.

• When wireless connection is

disconnected for one minute, the

indicator turns off.

b CONNECT (connect)

Press to to enter the pairing mode for the

subwoofer.

c AC MAINS~

Connect to the power supply.

3 Connect and set

This section helps you connect your SoundBar

to a TV and other devices, and then set it up.

For information about the basic connections of

your SoundBar and accessories, see the quick

start guide.

Note

• For identication and supply ratings, see the type plate

at the back or bottom of the product.

• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Place subwoofer

See the quick start guide on how to place the

subwoofer.

Note

• If you place the subwoofer vertically, install the supplied

foot stand to prevent instability of the subwoofer.

Place the subwoofer at least 1 meter (3 feet)

away from your SoundBar, and ten centimeters

away from the wall.

For best results, place your subwoofer as shown

below.

7EN

Pair up with the subwoofer

The wireless subwoofer automatically pairs

up with the SoundBar for wireless connection

when you turn on the SoundBar and the

subwoofer.

If no audio from the wireless subwoofer can be

heard, manually pair up the subwoofer.

1 Turn on the SoundBar and the subwoofer.

» If the connection to the SoundBar is

lost, the indicator on the subwoofer

blinks white slowly.

2 Press the CONNECT (connect) button on

the subwoofer to enter the pairing mode.

» The indicator on the subwoofer blinks

white quickly.

3 On the remote control, within six seconds

press twice then BASS + once, and then

hold down SURROUND ON.

» If the pairing succeeds, the indicator on

the subwoofer lights up white.

» If the pairing fails, the indicator on the

subwoofer blinks white slowly.

4 If the pairing fails, repeat the steps above.

Connect to TV

Connect your SoundBar to aTV.You can listen

to audio from TV programs through your

SoundBar. Use the best quality connection

available on your SoundBar andTV.

Connect to TV through HDMI (ARC)

Your SoundBar supports HDMI with Audio

Return Channel (ARC). If yourTV is HDMI ARC

compliant, you can hear the TV audio through

your SoundBar by using a single HDMI cable.

1 Using a High Speed HDMI cable, connect

the HDMI OUT (ARC)-TO TV connector

on your SoundBar to the HDMI ARC

connector on the TV.

• The HDMI ARC connector on the TV

might be labeled differently. For details,

see the TV user manual.

2 On yourTV, turn on HDMI-CEC

operations. For details, see the TV user

manual.

Note

• If yourTV is not HDMI ARC compliant, connect

an audio cable to hear theTV audio through your

SoundBar (see 'Connect audio from TV and other

devices' on page 8).

• If yourTV has a DVI connector, you can use an HDMI/

DVI adapter to connect to TV. However, some of the

features may not be available.

8EN

Connect digital devices

through HDMI

Connect a digital device such as a set-top box,

DVD/Blu-ray player, or games console to your

SoundBar through a single HDMI connection.

When you connect the devices in this way and

play a le or game, the

• video is automatically displayed on your

TV, and

• audio is automatically played on your

SoundBar.

1 Using a High Speed HDMI cable, connect

the HDMI OUT connector on your digital

device to the HDMI IN on your SoundBar.

2 Connect your SoundBar toTV through

HDMI OUT (ARC).

• If the TV is not HDMI CEC compliant,

select the correct video input on your

TV.

3 On the connected device, turn on HDMI-

CEC operations. For details, see the user

manual of the device.

Connect audio from TV and

other devices

Play audio fromTV or other devices through

your Soundbar speakers.

Use the best quality connection available on

yourTV, Soundbar, and other devices.

Note

• When your Soundbar andTV are connected through

HDMI ARC, an audio connection is not required. (see

'Connect to TV through HDMI (ARC)' on page 7)

Option 1: Connect audio through a

digital optical cable

Best quality audio

1 Using an optical cable, connect the

OPTICAL IN connector on your

SoundBar to the OPTICAL OUT

connector on the TV or other device.

• The digital optical connector might be

labeled SPDIF or SPDIF OUT.

Option 2: Connect audio through

analog audio cables

Basic quality audio

1 Using an analog cable, connect the AUX

IN (3.5mm jack) on your SoundBar to the

AUDIO OUT connectors (red and white)

on the TV or other device.

2 Press repeatedly AUX on the remote

control until AUX is displayed on the

display panel.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Système de haut-parleurs

Philips

Philips Fidelio B95 Manuel utilisateur

Philips

Philips Active Speaker System Manuel utilisateur

Philips

Philips Fidelio B97 Manuel utilisateur

Philips

Philips FB208W/00 Manuel utilisateur

Philips

Philips NTX400 Fiche d'information produit

Philips

Philips MMS460 - MMS 460 5.1-CH PC Multimedia Home Theater Speaker... Manuel utilisateur

Philips

Philips DTM5095/93 Manuel utilisateur

Philips

Philips A3.310/05 Guide de référence

Philips

Philips AZP6/12 Manuel utilisateur

Philips

Philips RWSS125 Manuel utilisateur

Philips

Philips CSS2133B/F7 Manuel utilisateur

Philips

Philips Fidelio CSS7235Y Manuel utilisateur

Philips

Philips HTL3160B/79 Manuel utilisateur

Philips

Philips TAB8507B/10 Manuel utilisateur

Philips

Philips FB209W Manuel utilisateur

Philips

Philips Essence 5000 Series Manuel utilisateur

Philips

Philips A 3.300 Acoustic Power Manuel utilisateur

Philips

Philips HTL4110B Manuel utilisateur

Philips

Philips HTL5160B/12 Manuel utilisateur

Philips

Philips HSB4383 Manuel utilisateur

Philips

Philips HTL3140B Manuel utilisateur

Philips

Philips HTB3520X Manuel utilisateur

Philips

Philips HTL2101B Manuel utilisateur

Philips

Philips HTL2110 Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur