Philips 55PUS6753/12 Manuel utilisateur
Philips 55PUS6753/12 55-Inch 4K Ultra HD Smart TV Wi-fi
Troubleshooting Steps
Situation
One or more of the following situations can occur:
• the IP address starts with 169 or 0.0
• there are problems making a wireless connection
• the connection is unstable
Checklist
Ensure that:
• The software on the TV is up-to-date
“Wi-Fi ready” TVs
For Wi-Fi ready TVs, an additional Wi-Fi dongle is needed to connect to the internet. Find
more information on the TV's specifications in the leaflet or manual on the TV Support
web page .
Ensure that the correct Philips Wi-Fi dongle is used if the TV is Wi-Fi Ready: the PTA01 or the
PTA128.
Note: If no PTA Wi-Fi dongle is available, a streaming stick (examples: Amazon Fire TV stick
or Google Chromecast) can be used for wireless Smart TV functionality.
Answer
If the TV has difficulties establishing a wireless internet connection, try the following:
1. Reset the router
Reset the router following the steps from the router’s manufacturer. Check the internet
connection after having reset the router.
Continue with the next steps if the internet connection issues maintain.
2. Check the router's password
• The WiFi password on the router can have some requirements:
WPA & WPA2 encryption (usual): the TV accepts all passwords
WEP encryption key: the TV only supports hexadecimal passwords (0-9, A-F).
Explanation: Hexadecimal passwords
The hexadecimal digits are the numbers from 0 to 9 and the letters from A to F (capital letters
only). Encryption keys require 10 or 26 characters. If your password has a length of 5 or 13
characters and / or letters other than those listed above, contact your Internet Service Provider
(ISP) and ask them to convert the password that you have to hexadecimal format.
• The wireless key is usually noted on the router’s label or in the documents of the router.
• Make sure that upper and lower cases are written correctly. Switch between different keysets
by pressing OK or using the coloured buttons on the remote control. If applicable, it is also
possible to use the keyboard the back of the remote control.
• Some routers have a WPS button that temporarily lowers security in order to let devices
connect to the network. When connecting the TV to the internet, choose WPS instead of scan.
3. Try to create the wireless connection again
Press the “Home”- button on the remote control of the TV and select:
[Setup] > [Connect to network] > [Wireless] > [Scan] and follow the steps on the screen
Or
Press the “Settings” button on the remote control of the TV and select:
[All settings] > [Wireless and networks] > [Wired or WiFi] > [Connect to network] > [Wireless]
• If there is more than one entry please choose the correct router name
• If the router does not appear in the overview of available routers, choose [Manual entry] and
enter the router name
If no Wi-Fi connection can be established, try the following:
4. Check the Network settings on the TV
Press the “Home”-button on the remote control of the television and select:
[Setup] > [Network settings] > [View network settings]
Or
Press “Settings” on the remote control of the TV and select:
[All settings] > [Wireless and networks] > [Wired or WiFi] > [View network settings]
In this menu the following settings can be checked:
• [Network mode]: This should be set to [DHCP/auto IP]
This option ensures the television will automatically update the connection if the router changes
the IP address for the television
• [IP Address]: The IP address should not start with numbers 0 or 169.xxx or be empty
• [Signal strength] (page 2): This should be at least 80% or four bars
5. Hard reset
A hard reset can reestablish a connection with wireless internet. To perform a hard reset, proceed
as follows:
• Switch the TV OFF
• Unplug all cables and accessories from the TV
• Wait for at least one minute before plugging all cables in again
6. Check the router’s security options
Security settings on the router could prevent the TV to establish a connection. Please check the
following settings:
• Internet ports 80 and 443 should be open
• Cloud protection on the router should be turned off
• Check the router settings for the option ‘hide/invisible SSID’. This option should be
deactivated
Note: All routers are different. For more information on how to change these settings, check the
manual or contact the router manufacturer
7. Test another connection
• Connect the router and the TV with an Ethernet cable
• Create a hotspot network on a smart device
8. Reinstall the TV
Note: Be aware that recordings, settings and channel information will be lost during
reinstallation
Press the “Home”-button on the remote control of the television and select, depending on the
TV:
[Setup] > [TV settings] > [Reinstall TV]
[Setup] > [TV settings] > [General settings] > [Reinstall TV]
Or
Press “Settings” on the remote control of the television and select:
[All settings] > [General settings] > [Reinstall TV]
Table des matières
Autres manuels Philips Téléviseur intelligent
Philips
Philips 55OLED805/79 Manuel utilisateur
Philips
Philips 43PFL5604/F7 Manuel utilisateur
Philips
Philips 32HFL5114/12 Manuel utilisateur
Philips
Philips OLED935 Series Manuel utilisateur
Philips
Philips 4200 series Manuel utilisateur
Philips
Philips 50PUT7383 Manuel utilisateur
Philips
Philips 43PUT7303 Manuel utilisateur
Philips
Philips 46PFL8606K/02 Manuel utilisateur
Philips
Philips 7363 Series Manuel utilisateur
Philips
Philips 65PUS7657 Manuel utilisateur
Philips
Philips 43PFL5604/F7 Manuel utilisateur
Philips
Philips 50PUS7605 Manuel utilisateur
Philips
Philips 55PUT7383 Manuel utilisateur
Philips
Philips 65PUT7383 Manuel utilisateur
Philips
Philips 55PUT7303 Manuel utilisateur
Philips
Philips OLED705 Series Manuel utilisateur
Philips
Philips 50PFL5604 Manuel utilisateur
Philips
Philips 55PFL6900 Manuel utilisateur
Philips
Philips 6000 Series Manuel utilisateur
Philips
Philips 55PFL6900 Manuel utilisateur
