Philips LTC1133/11 Manuel utilisateur

LTC 113x & LTC123x

FlexiDome Series

Fixed Dome Cameras

Installation Instructions

Eng

ltc1132_ii_03081_99-44_Multi-Eng.qxd 11/8/99 9:57 AM Page 1

IMPORTANT SAFEGUARDS

1. Read Instructions

All the safety and operating instructions should be read before the unit is

operated.

2. Retain Instructions

The safety and operating instructions should be retained for future

reference.

3. Heed Warnings

All warnings on the unit and in the operating instructions should be

adhered to.

4. Follow Instructions

All operating and use instructions should be followed.

5. Cleaning

Unplug the unit from the outlet before cleaning. Do not use liquid cleaners

or aerosol cleaners. Use a damp cloth for cleaning.

6. Power Sources

This unit should be operated only from the type of power source indicated

on the marking label. If you are not sure of the type of power supply you

plan to use, consult your appliance dealer.

7. Power-Cord Protection

Power-supply cords should be routed so that they are not likely to be walked

on or pinched by items placed upon or against them, paying particular

attention to cords and plugs, convenience receptacles, and the point where

they exit from the appliance.

8. Power Line

An outdoor system should not be located in the vicinity of overhead power

lines or other electric light or power circuits, or where it can fall into such

power lines or circuits.

ltc1132_ii_03081_99-44_Multi-Eng.qxd 11/8/99 9:57 AM Page 2

9. Overloading

Do not overload outlets and extension cords as this can result in a risk of fire

or electric shock.

10. Object and Liquid Entry

Never push objects of any kind into this unit through openings as they may

touch dangerous voltage points or short-out parts that could result in a fire

or electrical shock. Never spill liquid of any kind on the unit.

11. Servicing

Do not attempt to service this unit yourself as opening or removing covers

may expose you to dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

12. Damage Requiring Service

Unplug the unit from the outlet and refer servicing to qualified service

personnel under the following conditions.

If liquid has been spilled, or objects have fallen into the unit.

If the unit has been exposed to train or water.

If the unit does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

instructions, as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician to

restore the unit to its normal operation.

If the unit has been dropped or the cabinet has been damaged.

When the unit exhibits a distinct change in performance - this indicates a

need for service.

13. Replacement Parts

When replacement parts are required, be sure the service technician has used

replacement parts specified by the manufacturer or have the same

characteristics as the original part. Unauthorized substitutions may result in

fire, electric shock or other hazards.

ltc1132_ii_03081_99-44_Multi-Eng.qxd 11/8/99 9:57 AM Page 3

14. Safety Check

Upon completion of any service or repairs to this unit, ask the service

technician to perform safety checks to determine that the unit is in proper

operating condition.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into and outlet on a circuit different form that to

which the receiver is connected.

■Consult the dealer or an experienced radio/ TV technician for help.

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with emission limits.

Changes or modification not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

ltc1132_ii_03081_99-44_Multi-Eng.qxd 11/8/99 9:57 AM Page 4

SAFETY PRECAUTIONS

This label may appear on the bottom of the unit due to space limitations.

The lightning flash with an arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of un-insulated

" dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constiuce a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to presence of important operating and maintenance

(servicing) instructions in the literature accompanying the

appliance.

Attention: Installation should be performed by qualified service

personnel only in accordance with the National Electrical Code or

applicable local codes.

1.1

CAUTION:TO REDUCETHE RISK OF ELECTRICAL SHOCK,

DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS

INSIDE. REFER SERVICINGTO QUALIFIED SERVICE

PERSONNEL.

ATTENTION: INSTALLATION SHOULD BE PERFORMED BY

QUALIFIED SERVICE PERSONNEL ONLY IN ACCORDANCE

WITHTHE NATIONAL ELECTRICAL CODE OR APPLICABLE

LOCAL CODES.

ltc1132_ii_03081_99-44_Multi-Eng.qxd 11/8/99 9:57 AM Page 1.1

TABLE OF CONTENTS

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . .1

FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .1.1

FEATURE OF FlexiDome Series

Monochrome and Color Fixed Dome Cameras . . . . . . . . . . . .1.2

1. dimension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3

2. STANDARD PACKAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.4

3. INSTALLATION for Surface ( Wall ) Mount . . . . . . . . . . . . .1.5

4. INSTALLATION for Flush (Ceiling) Mount . . . . . . . . . . . . . .1.7

5. TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.11

FEATURE OF FLEXIDOME SERIES

Monochrome and Color Fixed Dome Cameras

■Fixed Camera in 76mm (3 inch) Dome

■Color (DSP) and Monochrome models

■1/3-inch Format CCD Image

■Selectable Shutter Controls, Electronic Shutter mode or/ Flickerless mode

■Back light Compensation

■Choice of 3.6mm or 6mm Lens

■Two Color Finishing, Dark or Light Dome Version

■Internal Pan (360°); and Tilt (90°) Manual Adjustment

■Flush & Surface; Ceiling & Wall Mounting in Standard Option

1.2

ltc1132_ii_03081_99-44_Multi-Eng.qxd 11/8/99 9:57 AM Page 1.2

1 DIMENSION

1.1 Front view of camera.......................

1.2 Top view of camera........................

1.3 Side view of ring..............................

1.3

101/3.98

81/3.2

123.5/4.86

101/3.98

101.5/4.0

76.2/3.0

90.1/3.55

48.1/1.9

mm/inch

ltc1132_ii_03081_99-44_Multi-Eng.qxd 11/8/99 9:57 AM Page 1.3

2 STANDARD PACKAGE INCLUDED

- Metal bracket x1 pcs...................................

- Spring sheet x 2 pcs...................................

- Screw (for flush mount) x 4 pcs.................

- Camera unit x 1 sets, plus 4 spare fixing

screws......................................................

- Plastic ring x 1 pcs.....................................

- IFU x 1 copy..............................................

1.4

dome bubble

housing cover

housing base

ltc1132_ii_03081_99-44_Multi-Eng.qxd 11/8/99 9:57 AM Page 1.4

Recommend for Indoor Application Only

3. INSTALLATION (for Surface (Wall ) Mount)

case a: Cables'route is above the surface like ceiling

case b: Cables'route is on the surface like concrete wall

3.1 Case a:

Drill three(3) holes (ø 3mm [0.19-

inch]) for camera mount; and one(1)

go-through hole (ø 8mm [0.31-inch])

for cables entry.

Case b:

Drill three(3) holes (ø 3mm [0.19-

inch]) for camera mount only.

3.2 Connect "power cable (12Vdc)" to the

terminal block; and coaxial cable (w/

female BNC) with the video extension

one.

Note: Use only Class 2 listed

12Vdc/ 300mA well regulated

power supply.

3.3 Case b only

Take off rim(s) of cable entry.

1.5

120˚ ø8mm ø67/2.64

ø3/0.19 x3

mm/inch

120˚ ø67/2.64

ø3/0.19 x3

mm/inch

video

power

ltc1132_ii_03081_99-44_Multi-Eng.qxd 11/8/99 9:57 AM Page 1.5

3.4 Take off the housing cover together

with dome bubble.

3.5 Set the Dip switch.

3.6 Install the camera onto wanted surface

(wall) by fastening 3 screws (not

supplied).

3.7 Adjust the lens position; and make

sure the wanted view area has been

covered. Then fix the position of

camera module by fastening 2

screws on both sides of metal

frame.

1.6

push

1 2

''OFF'' position ''ON'' position

Dip Switch 1 BLC (disabled) BLC (enable)

Dip Switch 2 ES mode Flickerless mode

180˚

360˚

ltc1132_ii_03081_99-44_Multi-Eng.qxd 11/8/99 9:57 AM Page 1.6

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Caméra de sécurité

Philips

Philips 98MC350R Manuel utilisateur

Philips

Philips VCM 6150/00T Manuel utilisateur

Philips

Philips CCD Manuel utilisateur

Philips

Philips VCM7250/00T Manuel utilisateur

Philips

Philips VCM8935/00T Manuel utilisateur

Philips

Philips VCM6350/00T Manuel utilisateur

Philips

Philips VCM8121/01T Manuel utilisateur

Philips

Philips M120 Manuel utilisateur

Philips

Philips VC863652T Manuel utilisateur

Philips

Philips VCM7150/00T Manuel utilisateur

Philips

Philips VCM8121/00T-/01T Manuel utilisateur

Philips

Philips VCM8161/00T-/01T Manuel utilisateur

Philips

Philips VCM 6110/00T Manuel utilisateur

Philips

Philips VC 71505 Manuel utilisateur

Philips

Philips LTC0240/10 Manuel utilisateur

Philips

Philips Inca 311 Manuel utilisateur

Philips

Philips VC963650T Manuel utilisateur

Philips

Philips LTC 0330/x1 Series Manuel utilisateur

Philips

Philips VCM7178/00T Manuel utilisateur

Philips

Philips NetCam DVR Manuel utilisateur

Philips

Philips LTC0143/50 Manuel utilisateur

Philips

Philips LTC0335 Manuel utilisateur

Philips

Philips VCM8120/00T-/01T Manuel utilisateur

Philips

Philips LTC 9450 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur