Philips BDL5545E Manuel utilisateur
SERVICE MANUAL
BDL5545E
Philips BDL5545E 1
TABLE OF CONTENTS
CHAPTER A REVISION LIST……………………………………………………………………….2
CHAPTER B WARNNING…………………………………………………………………………...3
CHAPTER C SEFETY RRECAUTIONS………….……………………......................................4
CHAPTER 1 GENERAL SPECIFICATION………………….....................................................5
CHAPTER 2 OPEARTING INSTRUCTION……………………………....................................14
CHAPTER 3 THEORY OF OPERATION…………………………….......................................35
CHAPTER 4 BLOCK DIAGRAM…………………………………….…....................................38
CHAPTER 5 SCHEMATIC DIAGRAM…………………..........................................................39
CHAPTER 6 LAYOUT SIDE VIEW……………………...........................................................40
CHAPTER 7 EXPLODED VIEW…………………………………………...................................41
CHAPTER 8 TROUBLE SHOOTING…………………….………….........................................42
Philips BDL5545E 2
CHAPTER A
REVISION LIST
Model Name Version Issues Date Remark
BDL5545E 3A 2011-11-08 First Release
Philips BDL5545E 3
CHAPTER B
WARNNING
This service information is designed for experienced repair technicians only and is not
designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of
potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced
professional technicians.
Any attempt to service or repair the product or products dealt within this service
information by anyone else could result in serious injury or death.
CHAPTER C
SAFETY PRECAUTIONS
1. Caution
No modification of any circuit should be attempted. Service work should only be performed after you
are through familiar with all of the following safety checks and servicing guide lines.
2. Safety check
Care should be taken while servicing this LCD display. Because of the high voltage used in the
inverter circuit. These voltage are exposed in such areas as the associated transformer circuits.
3. Power supply requirements
The internal power converter with the attached AC power cord is necessary for the LCD monitor. Any
attempt to replace another power converter could result in serious of problems on the display.
4. Leakage current hot check
4-1 Plug the AC cord directly into the AC outlet. Do not use an isolation transformer during this check.
4-2 Connect a 1500 ohm, 10 watt resistor, paralleled by a 0.15uF capacitor between each metallic
part and a good earth ground.
4-3 Use an AC voltmeter with 1000 ohm / volt or more sensitivity and measure the AC voltage across
the combination 1500 ohm resistor and 0.15uF capacitor.
4-4 Move the resistor connection to each exposed metallic part and measure the voltage.
4-5 Reverse the polarity of the AC plug in the AC outlet and repeat the above measurement.
4-6 Voltage measured must not exceed 1.5 volt RMS, from any exposed metallic part to the ground.
A leakage current tester may be used in the above hot check, in which case any circuit measured
must not exceed 1 milliamp. In the case of a measurement exceeding the 1 milliamp value, a rework is
required to eliminate the chance of a shock hazard.
To Metal Parts
V
AC VOLTMETER
1500 10W
0.15u
.
Earth Ground
Philips BDL5545E 4
Philips BDL5545E 5
CHAPTER 1
GENERAL SPECIFICATION
Index of this chapter:
1. Specification
2. Outline
3. I/O connectors
4. Factory preset timing
1. Specification
Item Specification
LCD Module
Size: 54.64” diagonal
Pixel Pitch: 0.630(H) mm x 0.630(V) mm
Resolution: 1920(H) x 1080(V)
Color: 10 bit colors
Brightness: 500 cd/m2 (typical)
Contrast Ratio: 5000:1 (typical), 15000:1 (smart contrast)
Viewing Angle (CR>10): Horizontal 178° / Vertical 178°
Response Time: 8 ms (GTG)
Frequency Horizontal :15 ~ 91 KHz
Vertical :50 ~ 85 Hz
Pixel Clock 13.5 ~ 165.0 MHz
Speaker External speaker jack: 7W+7W
Internal speaker: 10W+10W
Power Supply 100 / 240 VAC, 50 / 60 Hz
Power Consumption Display mode: <350 W (typical), <400 W (max)
Sleeping mode: Less than 1 W
Operational Environment Temperature: 0 ~ 40 °C, Humidity: 20 ~ 80%
Storage Environment Temperature: -20 ~ 60 °C, Humidity: 10 ~ 90%
Tilt / Swivel / Rotation No
Wall Mount Method VESA in back-cover
Dimension (w/o stand) Net: 1299(W) x 770(H) x 130(D) mm
Cross: 1474(W) x 938(H) x 346(D) mm
Weight (w/o stand) Net: 42.7 kg
Gross: 51.7 kg
2. Outline
¾Front view
¾Rear view
Philips BDL5545E 6
¾Side view
(Left) (Right)
¾Top view
¾Button view
Philips BDL5545E 7
3. I/O connectors
3.1 Overview
OPS SLOT
Slot for installing the optional OPS module.
RS232C (OUT/IN)
RS232C network connection input/output for the use of loop through function.
AUDIO IN (AUDIO1/AUDIO2/ AUDIO3)
Connects to the audio output of a computer or an AV device.
AUDIO OUT R/L
Outputs the audio signal from the AUDIO IN (AUDIO1/AUDIO2/AUDIO3) or HDMI jack.
SPEAKERS R/L
Outputs the audio signal from the AUDIO IN (AUDIO1/AUDIO2/AUDIO3) or HDMI jack to external
speakers.
Main power switch
Press to switch the mains power on/off.
AC OUT
Connect to the AC IN socket of an external media device.(Rating : 100~240Vac, 50-60Hz, 3A Max.)
AC IN
Connect the supplied power cord to the wall outlet.
DISPLAY PORT
Connects to the DisplayPort output of a PC or an AV device.
VIDEO IN (HDMI)
Connects to the HDMI output of an AV device or connect to the DVI-D output of a PC. (Using a
DVI-HDMI cable)
Philips BDL5545E 8
VIDEO IN (DVI-D)
Connects to the DVI-D output of a PC or connect to the HDMI output of an AV device (Using a
DVI-HDMI cable).
VGA IN
Connects to the VGA output of a computer.
VGA OUT
Outputs the VGA signal from the VGA IN jack.
VIDEO IN (COMPONENT)
Component video input (Component) for connecting to the component output of an AV device.
Philips BDL5545E 9
Autres manuels pour BDL5545E
1
Table des matières
Autres manuels Philips Moniteur
Philips
Philips Momentum 275M8RZ/69 Manuel utilisateur
Philips
Philips Brilliance 109P Manuel utilisateur
Philips
Philips 241S4 Manuel utilisateur
Philips
Philips 240P2 Manuel utilisateur
Philips
Philips Brilliance 235B2CS Manuel utilisateur
Philips
Philips 201B2CB Manuel utilisateur
Philips
Philips 170W4P Manuel utilisateur
Philips
Philips M32 107T4 GS_3 Manuel utilisateur
Philips
Philips Brilliance 170P6EB Manuel utilisateur
Philips
Philips 150P4CG Instructions d'installation et d'utilisation
Philips
Philips Signage Solutions BDL5520QL Manuel utilisateur
Philips
Philips 17SIA Manuel utilisateur
Philips
Philips 190EL1 Manuel utilisateur
Philips
Philips 65BDL4510D Manuel utilisateur
Philips
Philips 64PP9751 Manuel
Philips
Philips V40 109B6 Manuel utilisateur
Philips
Philips 230W5VS Manuel utilisateur
Philips
Philips 232E2SB Manuel utilisateur
Philips
Philips Brilliance 202P40 Manuel utilisateur
Philips
Philips 220X1SW/27 Manuel utilisateur
