Philips BDL4550D Manuel utilisateur

PHILIPS BDL4550D &

BDL3550Q ANDROID

SIGNAGE DISPLAY

INSTALLATION MANUAL

Status: Final

Version: A

Author: KAG

# of pages: 7 (Including this page)

R&D 2021-05-11 Page 2 of 7

1INTRODUCTION

1.1 Contents

Philips BDL4550D & BDL3550Q ANDROID SIGNAGE DISPLAY INSTALLATION MANUAL1

1 Introduction........................................................................................................... 2

1.1 Contents.......................................................................................................................................2

1.2 Change log .................................................................................................................................2

2 Installation instructions......................................................................................... 3

2.1 Models covered by instruction ...........................................................................................3

2.2 Ethernet connection................................................................................................................3

2.3 How to do a “Factory Reset”................................................................................................3

2.4 Initial Installation ......................................................................................................................4

3 Nice to know.......................................................................................................... 7

3.1 TV software version.................................................................................................................7

1.2 Change log

Version

Status

Date

Modified by

Changes

Final

2021-05-04

KAG

R&D 2021-05-11 Page 3 of 7

2INSTALLATION INSTRUCTIONS

2.1 Models covered by instruction

xxBDL4550D

xxBDL3550Q

2.2 Ethernet connection

Use the LAN port to connect the screen to your network.

2.3 How to do a “Factory Reset”

Note: If the TV has not been set up before, the TV will power on in the” Install menu”,

shown below. The factory reset can then be skipped.

•On the remote: Press the home button and when a menu shows press 1-8-8-8

to enter Android menu

•Enter Settings –Signage Display –System Tools –Factory Reset –select

Factory reset and then OK.

•The screen will now reset to factory settings.

R&D 2021-05-11 Page 4 of 7

2.4 Initial Installation

2.4.1 Screen settings

•Power On TV

•Welcome: Select language and select Start

•Security Setting: Skip

•Signage Display Settings: select Manual Setup and Next

•Signage Display Name: Skip

•Remote Control: Skip

•Network Settings:

oBDL4550D: Choose Wi-Fi or Ethernet

▪Wi-Fi: connect to your Wi-Fi network and continue

▪Ethernet: Enable Ethernet to continue

oBDL3550Q: See that Ethernet is selected and press next

▪Ethernet: Enable Ethernet to continue

•Clone Media Files into Internal: Skip

•Setup Complete: Finish

•Now you get some questions about access:

oAllow CMND&Deploy to access photos, media, and files on your device?

Allow

oCMND & Deploy: I Accept and Continue

•Now a message saying updates are available. Select LATER since this is just for

updating Teamviewer app which we do not use.

•Press the Home button on the remote to open built in settings

oAdvanced Option –Date and time: Choose time zone and check that the

time and date is correct. If not, turn off Auto Sync and set time and date

manually.

•Exit the menu.

•Press the home button and when a menu shows press 1-8-8-8 to enter Android

•Follow the General Settings described in 2.4.2

R&D 2021-05-11 Page 5 of 7

2.4.2 General Settings

To install Signage APP:

On your computer go to this url: https://a.dsig.tv/ and download the Android APK file

and place this in the root folder on a USB stick and insert into the back of the TV.

•From the Android Menu select Storage - USB

•Find the APK downloaded to install the Signage app.

oSelect install. When installation is finished, select OPEN to start the

Android Signage app.

•NOTE: You may get a message saying: FILE MANAGER: for your security, your

TV is not allowed to install unknown apps from this source.

oSelect settings –and select Allow from this source.

oPress the back button on the remote to continue installation

The signage app should now open and display the install code

•Access the signage management portal.

•Select add screen.

•Enter the Install Code presented on the screen.

After installation is completed, unplug the USB stick.

R&D 2021-05-11 Page 6 of 7

2.4.3 IMPORTANT

To get the screen to auto-start signage application you must activate this in

the signage management portal.

When screen shows up in the signage management portal, open settings for

this screen with the settings wheel when hovering mouse over the screen.

oOpen Actions –Player setup –Android –Autostart –Enable

oA message on the screen should display showing “Enabling

app autostart”

oConfirm that this is enabled in the portal by clicking on refresh

and the second lowest field should be: Android Autostart: enabled

R&D 2021-05-11 Page 7 of 7

3NICE TO KNOW

3.1 TV software version

•Use the Philips controller and press the home button and when a menu shows

press 1-8-8-8 to enter Android menu

•Select Settings –System - About

Check for newer versions: Settings –System Update –see that Online Update

is activated. It will then check automatically when booting the screen.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Moniteur

Philips

Philips E Line 276E8VJSB/57 Manuel utilisateur

Philips

Philips 200WB7EB/27 Manuel utilisateur

Philips

Philips 107X53 Instructions d'installation et d'utilisation

Philips

Philips BDL3231C Manuel utilisateur

Philips

Philips 42PFL7409/98 Manuel utilisateur

Philips

Philips Signage Solutions BDL4271VL Manuel utilisateur

Philips

Philips i Series Manuel utilisateur

Philips

Philips 221S6 Manuel utilisateur

Philips

Philips 107X23 Manuel utilisateur

Philips

Philips 21A582BH Manuel utilisateur

Philips

Philips X Series Manuel utilisateur

Philips

Philips Signage Solutions BDL6524ET Manuel utilisateur

Philips

Philips 107X43 Manuel utilisateur

Philips

Philips 190S5CB Manuel utilisateur

Philips

Philips 190V7 Manuel utilisateur

Philips

Philips 241P4QPYKEB Manuel utilisateur

Philips

Philips 107T Manuel utilisateur

Philips

Philips BDL5545E/00 Manuel utilisateur

Philips

Philips 230WP7 Manuel utilisateur

Philips

Philips L line 31BDL7324L Manuel utilisateur

Philips

Philips 170X4FS Manuel utilisateur

Philips

Philips 107T61 Manuel utilisateur

Philips

Philips 170S5FS/05 Instructions d'installation et d'utilisation

Philips

Philips 190V Guide de configuration

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation

LG M1950D-PZ Manuel utilisateur

Sceptre

Sceptre D40 Manuel utilisateur