Philips 10BDL4551T Manuel utilisateur
PHILIPS 10BDL4551T
ANDROID SIGNAGE DISPLAY
INSTALLATION MANUAL
Status: Final
Version: A
Author: KAG
# of pages: 7 (Including this page)
R&D 2021-05-11 Page 2 of 7
1INTRODUCTION
1.1 Contents
Philips 10BDL4551T ANDROID SIGNAGE DISPLAY INSTALLATION MANUAL................. 1
1 Introduction........................................................................................................... 2
1.1 Contents.......................................................................................................................................2
1.2 Change log .................................................................................................................................2
2 Installation instructions......................................................................................... 3
2.1 Models covered by instruction ...........................................................................................3
2.2 Ethernet connection................................................................................................................3
2.3 How to do a “Factory Reset”................................................................................................3
2.4 Initial Installation ......................................................................................................................4
3 Nice to know.......................................................................................................... 7
3.1 TV software version.................................................................................................................7
1.2 Change log
Version
Status
Date
Modified by
Changes
A
Final
2021-05-05
KAG
R&D 2021-05-11 Page 3 of 7
2INSTALLATION INSTRUCTIONS
2.1 Models covered by instruction
10BDL4551T
2.2 Ethernet connection
Use the LAN port to connect the screen to your network.
2.3 How to do a “Factory Reset”
Note: If the TV has not been set up before, the TV will power on in the” Install menu”,
shown below. The factory reset can then be skipped.
•Enter the Android menu. “Stop key, then Volume down key. Pincode 1-2-3-4
•Enter Settings –Signage Display –System Tools –Factory Reset –select
Factory reset and then OK.
•The screen will now reset to factory settings.
R&D 2021-05-11 Page 4 of 7
2.4 Initial Installation
2.4.1 Screen settings
•Power On TV
•Welcome: Select language and select Start
•Security Setting: Skip
•Signage Display Settings: select Manual Setup and Next
•Signage Display Name: Skip
•Remote Control: Skip
•Network Settings:
oChoose Wi-Fi or Ethernet
▪Wi-Fi: connect to your Wi-Fi network and continue
▪Ethernet: Enable Ethernet to continue
•Clone Media Files into Internal: Skip
•Setup Complete: Finish
•When CMND & Deploy shows:
•Enter the Android menu. “Stop key, then Volume down key. Pincode 1-2-3-4
•Follow the General Settings described in 2.4.2
R&D 2021-05-11 Page 5 of 7
2.4.2 General Settings
To install Signage APP:
On your computer go to this url: https://a.dsig.tv/ and download the Android APK file
and place this in the root folder on a USB stick and insert into the back of the TV.
•From the Android Menu select Storage - USB
•Find the APK downloaded to install the Signage app.
oSelect install. When installation is finished, select OPEN to start the
Android Signage app.
•NOTE: You may get a message saying: FILE MANAGER: for your security, your
TV is not allowed to install unknown apps from this source.
oSelect settings –and select Allow from this source.
oPress the back button on the remote to continue installation
The signage app should now open and display the install code
•Access the signage management portal.
•Select add screen.
•Enter the Install Code presented on the screen.
After installation is completed, unplug the USB stick.
R&D 2021-05-11 Page 6 of 7
2.4.3 IMPORTANT
To get the screen to auto-start signage application you must activate this in
the signage management portal.
When screen shows up in the signage management portal, open settings for
this screen with the settings wheel when hovering mouse over the screen.
oOpen Actions –Player setup –Android –Autostart –Enable
oA message on the screen should display showing “Enabling
app autostart”
oConfirm that this is enabled in the portal by clicking on refresh
and the second lowest field should be: Android Autostart: enabled
R&D 2021-05-11 Page 7 of 7
3NICE TO KNOW
3.1 TV software version
•Enter the Android menu. “Stop key, then Volume down key. Pincode 1-2-3-4
Select Settings and open About –Device Info.
Autres manuels pour 10BDL4551T
2
Table des matières
Autres manuels Philips Moniteur
Philips
Philips 2214 Series Manuel utilisateur
Philips
Philips 107C Manuel utilisateur
Philips
Philips BDL4270EL Manuel utilisateur
Philips
Philips 190CW8FW/00 Manuel utilisateur
Philips
Philips 190CW7CS Manuel utilisateur
Philips
Philips 328C7 Manuel utilisateur
Philips
Philips 231T1L Manuel utilisateur
Philips
Philips 328E8QJAB5 Manuel utilisateur
Philips
Philips BRILLIANCE 221C5 Manuel utilisateur
Philips
Philips 190EL1 Manuel utilisateur
Philips
Philips Brilliance 220P4LPYEB Manuel utilisateur
Philips
Philips SignageSolutions BDL5586XL Manuel utilisateur
Philips
Philips SignageSolutions BDL5586XL Manuel utilisateur
Philips
Philips Momentum 275M8 Manuel utilisateur
Philips
Philips 190CW9FB/05 Instructions d'installation et d'utilisation
Philips
Philips 107E6 Manuel utilisateur
Philips
Philips 196V4LAB2 Manuel utilisateur
Philips
Philips 223V5LSB Manuel utilisateur
Philips
Philips 150S5 Guide de référence
Philips
Philips 240P2 Manuel utilisateur
