Philips Compac CTX6 Series Manuel utilisateur

Commercial Emergency

CTX6 Series

Compac®Thermoplastic

Emergency Unit with Xtest

Project

Type

Model No.

Comments

Specifier’s Reference

CM-22200

Accessories (Order Separately)

WG5 – Wire Guard

PCS1 – PolycarbonateVandal Shield

Green Product Choice: CTX6

codes and standards

• ETL Listed to UL Standard 924

• NFPA 101 (Life Safety Code)

• NFPA 70 (National Electric Code)

construction

• Flame rated, UV stable ABS thermoplastic white

housing.

• Low profile test switch comes standard on the unit.

• Contemporary design external square style lamp

heads that utilize an innovative track system that

allows for a full range of adjustment for emergency

illumination.

installation

• Snap together quick mount design.

• Universal J-box mounting pattern.

electronics Xtest

• All units utilize a microprocessor and contain the

Xtest self-diagnostic/self-test circuitry.

• Each unit includes low voltage disconnect,AC

lockout, and brownout protection.

• Each unit with Xtest circuitry will automatically

conduct a self-test once a month with the lamps on

to verify all systems are functioning properly. For

complete details regarding Xtest circuitry see spec

sheet CE-17050.

• 120/277VAC selectable input.

• Power Consumption:

120V= 42 mA Line Amps

= 5.1W input Wattage

277V= 22.6 mA Line Amps

= 6.26W input Wattage

lamps

• Standard unit contains two 6 volt, 5.4W

tungsten lamps.

• The 18 Watt unit comes standard with 9W

tungsten lamps.

battery

• 6V Maintenance free sealed lead acid battery.

• Operating temperature range is 65˚F (19˚C) to

85˚F (30˚C).

• Provides a minimum of 90 minutes emergency

illumination.

warranty

• Five year warranty on unit (lamps not included).

Catalog Number Volts Total Wattage Remote1Housing Color LampType

Lead Calcium:

CTX6 6 12 None White 5.4W tungsten

CTX618 6 18 None White 9W tungsten

Footnote:

1Refer to CA-51300 for matching remote lamp heads.

CM-22200 08/16 page 1 of 2

CM-22200 CTX6 Series Compac®Thermoplastic Emergency Unit with Xtest

dimensions

5-11/16"

(128.3mm)

5-1/4"

(133.6mm)

11-1/16"

(280.9mm)

photometry

Meets Life Safety Code standard minimum illuminance of 0.1 FC and average

illuminance of 1.0 FC.Assumes open space with no obstructions, mounting

height: 8', ceiling height: 9', and reflectances: 80/50/20.Analysis based on

independently tested photometrics.

Xtest testing specifications

• Automatic Test:The system charger and lamps are continually being

controlled via pre-determined parameters specific to each model

configuration, automatically.The battery is controlled via a true open circuit

test each hour after initial installation. One each month the Xtest System

illuminates lamps under load for 30 minutes, simulating a power outage

with a true charger off condition, without affecting long term battery life.

This is above and beyond the requirements of the National Fire Protection

Association.This gives you unequaled control and confidence, knowing you

are meeting self-test code requirements each and every month.

• Manual Test:A manual test switch allows for the Xtest system to perform

the following tests at any time:

Press Button

Once–5 second test, charger off, no load

Twice–60 second test, charger off, lamps on

Three–90 minute test, charger off, lamps on

6-Second Hold–Fully reinitializes micro-processor.

Pressing once during any test will cancel/abort testing.

Location of sensor for laser activation

of manual test via handheld remote laser

tester (this is an optional feature, specify

“LX” option)

SELF-TEST / DIAGNOSTIC

CHARGER

BATTERY

LAMPS

CHG-TEST

Xtest Status Indicator Panel

AC/Green Charger/Red Batt/Red Lamp/Red Status/Fault Action

On AC power is on/OK None

FPerforming Test None

On F F F Lamp/Battery Disconnected or Charger Fault Check connections; if ok, replace circuit board

On F Charger fault Replace circuit board

On F Battery disconnected/fault Check connection or replace battery

On F Lamp disconnected/bad or remote disconnected Check connection then press manual test once to

determine bad lamp/replace lamp or check remote lamp.*

Fault Indications:

Four LED indicators provide visible indication of system status:

*If unit has remote capacity and remote cable is connected to charger board but not connected to

a remote load, then either connect remote load or disconnect cable from charger board.

On=Steady F=Flashing Blank=Off

lamp spacing avg. fc. max. fc. min. fc.

CTX6 5.4W tungsten 24ft. 1.0 2.00 0.1

CTX618 9W tungsten 39ft. 1.4 2.70 0.1

Test Numbers:

CTX6 - CSWA

CTX618 - CSWC

Philips reserves the right-make changes in specications

and/or-discontinue any product at any time without notice

or obligation and will not be liable for any consequences

resulting from the use of this publication.

philips.com/luminaires

Philips Lighting North America Corporation

200 Franklin Square Drive, Somerset, NJ 08873

Tel. 855-486-2216

Philips Lighting Canada Ltd.

281 Hillmount Rd, Markham, ON, Canada L6C 2S3

Tel. 800-668-9008

CM-22200 08/16 page 2 of 2

Ce manuel convient aux modèles suivants

Autres manuels Philips Équipement d'éclairage

Philips

Philips Ballasts For Fluorescent Lamps Manuel utilisateur

Philips

Philips InteGrade LED engine system Manuel utilisateur

Philips

Philips Selecon PL3 LED Luminaires Mode d’emploi

Philips

Philips hue 17457 V7 Series Manuel utilisateur

Philips

Philips CitySpirit Street BDS480 Guide de l'utilisateur

Philips

Philips 910503700745 Manuel utilisateur

Philips

Philips hue Centris Manuel utilisateur

Philips

Philips HF3651 Manuel utilisateur

Philips

Philips FL80 Instructions d'installation et d'entretien

Philips

Philips iPlayer 3 Manuel utilisateur

Philips

Philips SL ePAR 180 LED Luminaire Manuel utilisateur

Philips

Philips Bodine BSL20LV-DF Manuel utilisateur

Philips

Philips 56490-31-16 Manuel utilisateur

Philips

Philips CityTouch OLC NEMA SR LLC7280 Manuel utilisateur

Philips

Philips LEDALITE TruGroove Series Manuel utilisateur

Philips

Philips L 1250 - HPM Instructions d'utilisation et d'entretien

Philips

Philips 56433-31-16 Manuel utilisateur

Philips

Philips Lightstrip Plus 71901/U8 Series Manuel utilisateur

Philips

Philips ColorGraze IntelliHue Powercore BCS559 30x60 RGBMW... Manuel utilisateur

Philips

Philips RC095V Manuel utilisateur

Philips

Philips 59273-17-16 Manuel utilisateur

Philips

Philips Ecomoods 57930/**/16 Series Manuel utilisateur

Philips

Philips ColorBlast TRX Manuel utilisateur

Philips

Philips 57948-17-16 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur