Philips HI 518 Manuel utilisateur

Azur Excel Plus

HI545, HI535, HI529, HI528, HI525, HI518, HI515

4239 000 44177 28-09-2004 11:52 Pagina 1

4239 000 44177 28-09-2004 11:52 Pagina 2

MLK

HI 525

HI 528

HI 529

HI 535

HI 545

MAX

HI 525/28/29/35 HI 545HI 515/518

DDD EEE FFF

4239 000 44177 28-09-2004 11:52 Pagina 3

4239 000 44177 28-09-2004 11:52 Pagina 4

ENGLISH 6

POLSKI 14

ROMÂNĂ 22

РУССКИЙ 30

ČESKY 39

MAGYAR 47

SLOVENSKY 55

УКРАЇНСЬКА 63

HRVATSKI 71

EESTI 79

LATVISKI 87

LIETUVIŠKAI 95

SLOVENŠČINA 103

БЪЛГАРСКИ 111

SRPSKI 120

HI545, HI535, HI529, HI528, HI525, HI518, HI515

4239 000 44177 28-09-2004 11:52 Pagina 5

General description

ASpray nozzle

BFilling opening with cap

CTurbo-steam button 0(types HI525/28/29/35/45)

DShot-of-steam button 9

ESteam control

- 0 = no steam

- 1 = minimum steam output

- 6 = maximum steam output

FSpray button 8

GAuto-stop pilot light

HTemperature pilot light

ITemperature dial

JSoft-touch handgrip (types HI525/28/29/35/45)

KCord storage

LType plate

MWater window

NSelf-clean button

OFilling cup

Important

Read these instructions for use carefully before using the appliance and

save them for future reference.

◗Check if the voltage indicated on the type plate corresponds to

the local mains voltage before you connect the appliance.

◗Check the cord regularly for possible damage.

◗Do not use the appliance if the plug, the cord or the appliance

itself is damaged.

◗If the mains cord is damaged, it must be replaced by Philips, a

service centre authorised by Philips or similarly qualified persons

in order to avoid a hazard.

◗Never leave the iron unattended when it is connected to the

mains.

◗Never immerse the iron in water.

◗Keep the appliance out of the reach of children.

◗The soleplate of the iron can become extremely hot and may

cause burns if touched. Do not allow the cord to come into

contact with the soleplate when it is hot.

◗When you have finished ironing, when you clean the appliance,

when you fill or empty the water tank and also when you leave

the iron even for a short while: set the steam control to position

0, put the iron on its heel and remove the mains plug from the

wall socket.

◗This appliance is intended for household use only.

ENGLISH6

4239 000 44177 28-09-2004 11:52 Pagina 6

Before first use

1Remove any sticker or protective foil from the soleplate and

clean it with a soft cloth.

Always put the iron on a flat, stable surface to prevent the iron from

toppling over (avoid putting it too close to the edges of the ironing

board or table). Make sure that the mains cord does not obstruct any

passage.

BThe iron may give off some smoke when you use it for the first time.This

will cease after a short while.

Preparing for use

Filling the water tank

Never immerse the iron in water.

1Make sure the appliance is unplugged.

1Set the steam control to position 0 (= no steam).

C2Put the iron on its heel and open the cap of the filling opening.

C3Fill the water tank with tap water up to the maximum level by

means of the filling cup.

Do not fill the tank beyond the MAX indication.

◗If the tap water in your area is very hard, we advise you to use

distilled water.

Do not put perfume, vinegar, starch, descaling agents, ironing additives

chemically descaled water or other chemicals in the water tank.

C4Close the cap of the filling opening.

Setting the temperature

1Put the iron on its heel.

ENGLISH 7

4239 000 44177 28-09-2004 11:52 Pagina 7

C2Set the required ironing temperature by turning the

temperature dial to the appropriate position.

Check the care label for the required ironing temperature:

-1Synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester)

-1Silk

-2Wool

-3Cotton, linen

If you do not know what kind(s) of fabric(s) an article is made of,

determine the right ironing temperature by ironing a part that will not

be visible when you wear or use the article.

Silk, woollen and synthetic materials: iron the reverse side of the fabric

to prevent shiny patches. Avoid using the spray function to prevent

stains.

Start ironing the articles that require the lowest ironing temperature,

such as those made of synthetic fibres.

3Put the mains plug in an earthed wall socket.

4Start ironing when the amber temperature pilot light has first

gone out and then goes on again.

The amber pilot light will go on from time to time during ironing.

Using the appliance

Steam ironing

Steam ironing is only possible at higher ironing temperatures.

1Make sure that there is enough water in the water tank.

C2Turn the temperature dial to a position between 2and MAX.

C3Select the appropriate steam setting. Make sure that the steam

setting you select is suitable for the ironing temperature

selected:

- 1 - 3 for moderate steam (temperature settings 2to 3)

- 3 - 6 for maximum steam (temperature settings 3to MAX)

BThe iron will start steaming as soon as the set temperature has been

reached.

ENGLISH8

4239 000 44177 28-09-2004 11:52 Pagina 8

Ironing without steam

1Set the steam control to position 0 (= no steam).

2Select the recommended ironing temperature (see chapter

'Preparing for use', section 'Setting the temperature').

Features

Spray function 8

You can use the spray function to remove stubborn creases at any

temperature.

1Make sure that there is enough water in the water tank.

C2Press the spray button several times to moisten the article to

be ironed.

Shot of steam 9

A powerful shot of steam helps remove stubborn creases.

The shot-of-steam function can only be used at temperature settings

between 2and MAX.

C1Press and release the shot-of-steam button.

Wait 4-5 seconds before using the shot-of-steam function again to

avoid spluttering.

Vertical shot of steam

C1The shot-of-steam function can also be used when you hold

the iron in vertical position.

This is useful for removing creases from hanging clothes, curtains etc.

Never direct the steam towards people.

Turbo steam 0

BTypes HI545/35/29/28/25 only

The turbo-steam function helps remove difficult creases.

Only use the turbo-steam function at temperature settings between

3and MAX.

ENGLISH 9

4239 000 44177 28-09-2004 11:52 Pagina 9

C1Press the turbo-steam button and hold it down for max.

5 seconds.

2Release the button and wait at least 1 minute before using the

turbo-steam function again.

Drip stop

This iron is equipped with a drip-stop function: the iron automatically

stops producing steam when the temperature is too low to prevent

water from dripping out of the soleplate.When this happens you may

hear a click.

◗Set the temperature dial to a position that is suitable for steam

ironing (2to MAX). Make sure that the steam setting you select

is suitable for the ironing temperature selected (see 'Steam

ironing' in chapter 'Using the appliance').

The iron will start steaming as soon as the set temperature has been

reached.

Electronic safety shut-off function

BType HI545 only

The electronic safety shut-off function automatically switches the iron

off if it has not been moved for a while.

C◗To indicate that the heating element has been switched off, the

red auto-off pilot light will start blinking and you will hear an

audible signal.

- When the iron is in horizontal position, this will happen after 30

seconds.

- When the iron is in vertical position, this will happen after 8 minutes.

To let the iron heat up again:

- Pick up the iron or move it slightly.

- The red auto-off pilot light goes out and the amber temperature

pilot light goes on.

- The iron is ready for use when the amber pilot light has gone out.

ENGLISH10

HI 545

4239 000 44177 28-09-2004 11:52 Pagina 10

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Fer

Philips

Philips EasyCare GC3260 Manuel utilisateur

Philips

Philips GC160 Manuel utilisateur

Philips

Philips GC2830 Manuel utilisateur

Philips

Philips HI114 Manuel utilisateur

Philips

Philips Azur Ionic GC4700 Series Manuel utilisateur

Philips

Philips Azur Performer GC3811/70 Manuel utilisateur

Philips

Philips Premium GC4444 Manuel utilisateur

Philips

Philips GC4400 series Manuel utilisateur

Philips

Philips GC3300 SERIES Manuel utilisateur

Philips

Philips GC7705/30 Manuel utilisateur

Philips

Philips HD1173 Manuel utilisateur

Philips

Philips GC5030 series Manuel utilisateur

Philips

Philips GC5030 series Manuel utilisateur

Philips

Philips Azur Excel Plus HI 569 Manuel utilisateur

Philips

Philips GC8210 Manuel utilisateur

Philips

Philips GC3802/20 Manuel utilisateur

Philips

Philips Comfort LongLife GC1680 Manuel utilisateur

Philips

Philips GC8600 Series Manuel utilisateur

Philips

Philips FC7012 Manuel utilisateur

Philips

Philips GC7440 Manuel utilisateur

Philips

Philips Comfort GC1580 Manuel utilisateur

Philips

Philips PerfectCare 9000 Series Manuel utilisateur

Philips

Philips PerfectCare Aqua GC8600 Series Manuel utilisateur

Philips

Philips GC9221 Manuel utilisateur

Manuels Fer populaires d'autres marques

Clatronic

Clatronic DB 3703 Manuel utilisateur

TEFAL

TEFAL FV4093Z0 Manuel utilisateur

Gorenje

Gorenje SIH 2200 BS Manuel utilisateur

Bosch

Bosch 2 Series Manuel utilisateur

Riffel

Riffel Catena KB-819 Manuel utilisateur

Texi

Texi Hestia Manuel utilisateur

Maxwell

Maxwell MW-3010 Manuel utilisateur

TREVIDEA

TREVIDEA Girmi ST60 Manuel utilisateur

Primula

Primula Vapormat Manuel utilisateur

Magio

Magio MG-541 Manuel utilisateur

Scarlett

Scarlett SC-1334S Manuel utilisateur

Bosch

Bosch Sensixx B22L Manuel utilisateur

Vitek

Vitek VT-1247 VT Manuel utilisateur

Cleanmaxx

Cleanmaxx 3397 Manuel utilisateur

dyras

dyras ESI-2400AC Manuel utilisateur

GE 169061 Manuel utilisateur

Gorenje

Gorenje SIH 2200 GC Manuel utilisateur

AEG

AEG DBS 5591 Manuel utilisateur