Philips GC1900 Manuel utilisateur
GC1900 series
2
3
A B C D E F G IH J
N
K
O
M
L
1
4
6
18
30
44
60
73
86
99
112
125
137
150
162
6
Congratulations on your purchase and welcome to Philips! To fully benet
from the support that Philips offers, register your product at www.philips.
com/welcome.
Spray nozzle (all types except GC1903/GC1910)
Cap of lling opening
Steam control
- O= no steam
- small cloud = minimum steam
- large cloud = maximum steam
- x = Calc-clean position
Spray button 8 (all types except GC1903/GC1910)
Steam boost button \ (all types except GC1903/GC1905/GC1910/
GC1920)
Automatic shut-off light (GC1990/GC1991 only)
Temperature dial
Double-Active Calc System (all types except GC1903/GC1905/
GC1910/GC1920)
Temperature light
Mains cord
Type plate
Water tank
MAX water level indication
Soleplate
Heat-resistant storage cover (GC1981/1991 only)
Read this user manual carefully before you use the appliance and save it
for future reference.
- Never immerse the iron in water.
- Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.
- Do not use the appliance if the plug, the mains cord or the appliance
itself shows visible damage, or if the appliance has been dropped
or leaks.
- If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
- Never leave the appliance unattended when it is connected to the
mains.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
- Do not let the mains cord come into contact with the hot soleplate
of the iron.
- Only connect the appliance to an earthed wall socket.
- Check the mains cord regularly for possible damage.
- The soleplate of the iron can become extremely hot and may cause
burns if touched.
- When you have nished ironing, when you clean the appliance, when
you ll or empty the water tank and also when you leave the iron
even for a short while: set the steam control to position O, put the
iron on its heel and remove the mains plug from the wall socket.
- Always place and use the iron on a stable, level and horizontal
surface.
- Do not put perfume, vinegar, starch, descaling agents, ironing aids or
other chemicals in the water tank.
- This appliance is intended for household use only.
7
This Philips appliance complies with all standards regarding
electromagnetic elds (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
1 Remove any sticker or protective foil from the soleplate.
2 Let the iron heat up to maximum temperature and pass the iron
over a piece of damp cloth for several minutes to remove any
residues from the soleplate.
This iron is designed to be used with tap water.
If the tap water in your area is very hard, we advise you to mix it with an
equal amount of distilled water. Do not use distilled water only.
Do not put perfume, vinegar, starch, descaling agents, ironing aids,
chemically descaled water or other chemicals in the water tank.
1 Switch off the appliance and unplug it.
2 Set the steam control to position O (= no steam) (Fig. 2).
3 Open the cap of the lling opening (Fig. 3).
4 Tilt the iron and ll the water tank up to maximum level under the
tap (Fig. 4).
Note: Do not ll the water tank beyond the MAX indication.
5 Close the cap of the lling opening (‘click’).
8
Fabric type Temperature
setting Steam
setting Steam
boost
(specic
types only)
Spray
(specic
types
only)
Linen MAX large
cloud Yes \Yes 8
Cotton 3large
cloud Yes \Yes 8
Wool 2small
cloud No Yes 8
Silk 1O No No
Synthetic
fabrics (e.g.
Acrylic, nylon,
polyamide,
polyester).
1O No No
Check the laundry care label of the article to be ironed to determine the
required ironing temperature.
If you do not know what kind or kinds of fabric an article is made of,
determine the right ironing temperature by ironing a part that is not
visible when you wear or use the article.
Silk, woollen and synthetic materials: iron the reverse side of the fabric to
prevent shiny patches. Avoid using the spray function to prevent stains.
1 To set the appropriate ironing temperature, turn the temperature
dial to the appropriate position (see the table above) (Fig. 5).
2 Put the iron on its heel.
3 Put the mains plug in an earthed wall socket.
,The temperature light goes on.
9
Do not set the steam control to a steam setting if you have set a
low ironing temperature (below 2/ WOOL setting) or when the iron
is still heating up (as long as the temperature light is on). Otherwise
water will leak from the iron.
4 When the temperature light goes out, wait a while before you start
ironing.
,During ironing, the temperature light goes on from time to time.
This indicates that the iron is heating up to the set temperature.
5 Set the appropriate steam setting. Make sure that the steam setting
you select is suitable for the set ironing temperature:
- O for no steam (for all temperature settings). (Fig. 2)
- small cloud for minimum steam (temperature settings 2 and
3. (Fig. 6)
- large cloud for maximum steam (temperature settings 3 to
MAX. (Fig. 7)
You can use the spray function at any temperature to moisten the article
to be ironed. This helps remove stubborn creases.
1 Make sure that there is enough water in the water tank.
2 Press the spray button several times to moisten the article to be
ironed (Fig. 8).
A powerful boost of steam helps to remove very stubborn creases.
The steam boost function only works at temperature settings between
3 and MAX.
1 Press and release the steam boost button (Fig. 9).
10
Autres manuels pour GC1900
1
Table des matières
Langues :
Autres manuels Philips Fer
Philips
Philips HI 515/25 Manuel utilisateur
Philips
Philips GC4908/80 Manuel utilisateur
Philips
Philips GC4340, GC4330, GC4325, GC4320, GC4310 Manuel utilisateur
Philips
Philips GC922 Manuel utilisateur
Philips
Philips Premium GC4444 Manuel utilisateur
Philips
Philips GC2900 series Manuel utilisateur
Philips
Philips GC9955 Manuel utilisateur
Philips
Philips GC4500 series Manuel utilisateur
Philips
Philips PerfectCare PSG7014 Manuel utilisateur
Philips
Philips GC2078 series Manuel utilisateur
Philips
Philips GC3580 series Manuel utilisateur
Philips
Philips Azur GC4340 Manuel
Philips
Philips Azur GC4311 Manuel utilisateur
Philips
Philips GC7900 Series Manuel utilisateur
Philips
Philips GC3390 Manuel utilisateur
Philips
Philips DST 1000 Series Manuel utilisateur
Philips
Philips InstantCare GC7541/02 Manuel utilisateur
Philips
Philips GC4516/40 Manuel utilisateur
Philips
Philips HI5910 Manuel utilisateur
Philips
Philips GC8261 Manuel utilisateur
