Philips HTS9800W Guide de démarrage rapide

Firmware Upgrade

Introduction

The upgrade version of this software is Version 26 and can be used to upgrade Philips HTS9800W/12,

HTS9800W/37 and HTS9800W/55 to the latest status.

The upgrade allows the HTS9800W improves CDDA recognition, SCART detection and Bass/Treble.

Upgrade Procedure

Ste

1 Check your current firmware version

1 Power up the set in DISC mode and make sure there is no disc inside the set, then press <DISPLAY>

button on the remote control.

2 The software version and other information are display on the TV screen as follows:

G69M1 VXX 9800-XX X XX

Servo : XXXXXXXX Reg:X

HDCP XXXX (PASS or FAIL)

Example :

G69M1 V26 9800-12 2 08 -> Indicates Software version 26, stroke version 12, OTP version 8.

Servo : 94110000 Reg:2 -> Indicates Servo version 94110000 and Region code 2.

HDCP PASS -> Indicates HDCP pass.

Note:

Do NOT upgrade your set if the software version number is higher than V26!

The firmware information is also useful when you call Philips Customer Care Center.

Ste

2 Download Firmware upgrade

1 Check you have the following tools:

• PC (Pentium III 300MHz processor or higher)

• CD-R/RW writer and writing application software

• Blank CD-R or CD-RW disc

• Internet access (broadband or high speed)

2 Click the link to download Firmware Upgrade to your PC

3 Unzip the .zip file

i) Do not rename the filename.

ii) Visit http://www.winzip.com/ for downloads if you cannot open the .zip file.

Ste

3 Burning Upgrade on CD-R / CD-RW

1 Extract the files by unzipping the zipped file.

2 Write the extracted files – not the zip file – onto a blank CD-R or CD-RW disc, using the following settings:

- File System CD-ROM Joliet Tip: For more information on

burning software we suggest you

can refer to two popular burning

software programs

www.nero.com

www.eas

cdcreator.com

- File name length : max 31 chars (ISO Level 2)

- Mode : 2/XA

- Character set : ASCII

- Single session

- Write Speed : Low

3 Finalize the disc. (The application may do this automatically.)

Using Nero Burning Rom

Please make sure you are using Nero Burning Rom and not Nero Express. If necessary, you can start Nero

Burning Rom directly from the Nero folder in your Windows Start Menu.

1. Insert a blank CD-R or CD-RW disc

2. Open Nero Burning Rom

3. Select ‘Burn Image’ from the ‘Recorder’ menu

4. Select the unzipped file that you saved

are upgrade will now be burned onto the disc

Using CD Creator

5. Click ‘Burn’

ÆThe Firmw

or CD-RW disc

a CD’D image’ in the ‘File’ menu

1. Insert a blank CD-R

2. Open CD Creator

3. Select ‘Create Dat

4. Select ‘Record CD from C

5. elect the unzipped file that you saved

will now be burned onto the disc

6. Click ‘Start Recording’

ÆThe Firmware upgrade

pply Upgrade to your Set

. Power up the set and insert the prepared Upgrade CDR.

the upgrade disc will automatically be ejected. Remove Disc

4. how WRITE -> UPG END in about 2 minutes time.

. Software upgrading is completed

our product is successfully upgraded!

erifying firmware version

To check the rmware version, see Step 1.

elpful hints: If you have any problem, see Troubleshooting.

2. The set will automatically start upgrading.

3. Set’s FTD will display ERASE. After which

from set.

FTD will s

5. The set will go to standby and wake up automatically in disc mode

Ste

5 V

Firmware upgrade history

ersion 26

de allows the HTS9800W to have improved CDDA recognition, SCART detection and

• The upgra

Bass/Treble.

Autres manuels pour HTS9800W

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Système de cinéma maison

Philips

Philips HTS8100/98 Manuel utilisateur

Philips

Philips HTS5533/98 Manuel utilisateur

Philips

Philips HTB7560KD/98 Manuel utilisateur

Philips

Philips Immersive 7000 series Manuel utilisateur

Philips

Philips LX 3700D Manuel utilisateur

Philips

Philips MCD183/12 Manuel utilisateur

Philips

Philips MCD129/93 Manuel utilisateur

Philips

Philips HTS3378/98 Manuel utilisateur

Philips

Philips HTS3172/98/93 Manuel utilisateur

Philips

Philips HTS3300/55 Manuel utilisateur

Philips

Philips HTS5590 Manuel utilisateur

Philips

Philips HTS3265/98 Manuel utilisateur

Philips

Philips HTS3201/12 Manuel utilisateur

Philips

Philips MCD703/55 Manuel utilisateur

Philips

Philips HTS3156/93 Manuel utilisateur

Philips

Philips RWSS5510/00 Manuel utilisateur

Philips

Philips HTS6500 - DivX Ultra Home Theater System Manuel utilisateur

Philips

Philips MCD 908 Manuel utilisateur

Philips

Philips MCD703 Manuel utilisateur

Philips

Philips LX-3000D Manuel utilisateur

Philips

Philips HTS3090/77 Manuel utilisateur

Philips

Philips HTS3365/55 Manuel utilisateur

Philips

Philips HTS5120 Manuel utilisateur

Philips

Philips HTB5510D Manuel utilisateur

Manuels Système de cinéma maison populaires d'autres marques

Samsung

Samsung HT-ES4200K Manuel utilisateur

Harman Kardon

Harman Kardon HS 100 Manuel utilisateur

Samsung

Samsung HT-P10 Manuel utilisateur

Goodmans

Goodmans GDVD19SWS Manuel utilisateur

Moxi

Moxi media center Manuel utilisateur

Samsung

Samsung HT-EM35 Manuel utilisateur

LG HE903PAW Manuel utilisateur

Bose

Bose SoundTouch 520 Manuel utilisateur

Sony

Sony BDV-N990W Manuel utilisateur

Manta

Manta GK-500 Manuel utilisateur

Sharp

Sharp SBW800 Manuel utilisateur

LG LHT799 Manuel utilisateur

Samsung

Samsung HT-TWZ415 Manuel utilisateur

Loewe

Loewe REFERENCE 52 SL FHD+ 200 NMP Manuel utilisateur

Samsung

Samsung AH68-02166R Manuel utilisateur

RCA

RCA 600-Watt Manuel utilisateur

Sony

Sony HT-7100DH Manuel utilisateur

Samsung

Samsung HT-DS630T Manuel utilisateur